Spark Plugs ?
#3
To change spark plugs (from Nissan service manual):
(1) Remove left side rocker ornament.
(2) Disconnect ignition coil harness connectors.
(3) Loosen ignition coil fixing bolts and pull out coil from intake manifold connector.
(4) Remove spark plugs.
(5) Gap adjustment not needed.
(6) Re-install plugs. Torque to 14-22 ft-lb.
Notes: The "ornament" is that big thing with Nissan stamped on it. There are no spark plug wires: coils are used. No torque spec given for the ornament.
(1) Remove left side rocker ornament.
(2) Disconnect ignition coil harness connectors.
(3) Loosen ignition coil fixing bolts and pull out coil from intake manifold connector.
(4) Remove spark plugs.
(5) Gap adjustment not needed.
(6) Re-install plugs. Torque to 14-22 ft-lb.
Notes: The "ornament" is that big thing with Nissan stamped on it. There are no spark plug wires: coils are used. No torque spec given for the ornament.
Thread
Thread Starter
Forum
Replies
Last Post
My Coffee
New Member Introductions
15
06-06-2017 02:01 PM
magiconthetire
Audio and Electronics
2
10-26-2015 09:03 PM
Need help
5th Generation Maxima (2000-2003)
23
10-02-2015 08:56 AM