5th Generation Maxima (2000-2003) Learn more about the 5th Generation Maxima, including the VQ30DE-K and VQ35DE engines.

Help! my A/C buttons arent lit anymore :(

Thread Tools
 
Search this Thread
 
Old Jul 22, 2007 | 08:48 PM
  #1  
Anzioblack44's Avatar
Thread Starter
Member
 
Joined: Jan 2005
Posts: 38
Help! my A/C buttons arent lit anymore :(

Hey all, i have a 02 GLE with about 87,000 miles on her. The last few months ive been replacing various bulbs interior and exterior. So far theyve been pretty easy, (stoplamp, side markers, parking lamps).

The other night i realized that my Automatic Climate control lights under the buttons and dial are out, except for one. However the information screen is illuminated.

Now i have come across the occasional led modification thread, but i really dont want to buy a soldering iron and possibly ruin my functional climate control unit.

Im pretty sure i can get to the HVAC via my service manual, but i havent found any information about bulb replacement for this issue.

Tomorrow, im going to call courtesy Nissan to see whats up, but in the mean time, If you guys could point me in the right direction to gettin my buttons lit up again, that would be cool.
thanks for your help,
Jason
Old Jul 22, 2007 | 08:51 PM
  #2  
AceofSpds's Avatar
wat
iTrader: (4)
 
Joined: Aug 2005
Posts: 2,480
From: Mobile, AL
Push on the trim around it and press some of the buttons. It gets loose sometimes from the vibrations from driving i would guess.
Old Jul 23, 2007 | 12:20 AM
  #3  
sam201180's Avatar
Junior Member
 
Joined: Nov 2005
Posts: 18
It's fairly simple! There are four bulbs to replace under the plastic cover of your climate control. Done it myself too!

Oh! and no soldering is needed. These led bulbs are clip-on. You put them on and twist clockwise to tighten.
Old Jul 23, 2007 | 01:33 PM
  #4  
Anzioblack44's Avatar
Thread Starter
Member
 
Joined: Jan 2005
Posts: 38
Thanks guys, i got it done today, same bulbs from radio shack i had to buy for the Heated seat switch bulbs... i dont thing they are as bright as the originals, but hey something is better than nothing! I may go back and try LED's later
Old Jul 23, 2007 | 02:39 PM
  #5  
Dust N Bones's Avatar
Senior Member
iTrader: (1)
 
Joined: Feb 2005
Posts: 614
From: Albany, NY
Anzioblack44 - Did you need a soldering iron to replace the heated seat bulbs? I need to replace my drivers side bulb.
Old Jul 23, 2007 | 03:30 PM
  #6  
pyroz's Avatar
Senior Member
 
Joined: Mar 2006
Posts: 171
do you have the digital climate control or the manual one? mine went out too, what type of bulb did you buy? i assume they're the same as my car since i have an 2000 max and u got a 2002 max.
Old Jul 23, 2007 | 08:39 PM
  #7  
lowincash's Avatar
No More Maxipad
iTrader: (2)
 
Joined: Jul 2005
Posts: 944
From: Los Angeles
you know what...mine went out too in the same place a few months back...maybe half a year back...i was too lazy to get it fixed but a few weeks ago they came back on lol
Old Jul 23, 2007 | 08:40 PM
  #8  
SoonerFan's Avatar
Cletus
iTrader: (5)
 
Joined: Sep 2003
Posts: 23,676
From: OKC, OK
its very common for those lights to burn out
Old Jul 23, 2007 | 08:46 PM
  #9  
stocked out max's Avatar
Member
iTrader: (2)
 
Joined: Jan 2007
Posts: 200
From: long island
Originally Posted by chopstix2nrz
Push on the trim around it and press some of the buttons. It gets loose sometimes from the vibrations from driving i would guess.

my left side of the console conked out so i gave it a good wack on the side, and what do yah know they came back on
Old Aug 1, 2007 | 02:27 PM
  #10  
tsk808's Avatar
Senior Member
 
Joined: Mar 2005
Posts: 126
From: Seattle, WA
Originally Posted by sam201180
It's fairly simple! There are four bulbs to replace under the plastic cover of your climate control. Done it myself too!

Oh! and no soldering is needed. These led bulbs are clip-on. You put them on and twist clockwise to tighten.
There should be only 3 bulbs, 27545MA. a fourth one is for illuminating the shifter and hazard. the 3 are a pain to twist on, if you have the tool that looks like a cross it'd help or screw it and use a needlenose.

What stumps me is that there's a blue "condom" on it and yet the light comes out white. Without the rubber it's yellow/orangeish. ??
Old Aug 1, 2007 | 02:44 PM
  #11  
00MaxSE's Avatar
Pointy Elbows
iTrader: (25)
 
Joined: Apr 2002
Posts: 9,780
From: Cleveland, OH
The right side of my climate control buttons are out too. Gotta do this.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
tarun900
4th Generation Maxima (1995-1999)
19
Dec 20, 2021 06:57 PM
worldwiderecognized
6th Generation Maxima (2004-2008)
0
Sep 30, 2015 01:16 PM
EdRomo86
6th Generation Maxima (2004-2008)
0
Sep 12, 2015 07:49 PM
Maxima30
5th Generation Maxima (2000-2003)
2
Sep 7, 2015 06:13 PM




All times are GMT -7. The time now is 04:36 PM.