Does anyone know how to reset the ECU in a 2k Max? I have searched the entire sight and could only come up with a reset for a 95 Max. It helped out a little. I pop the plastic shield near the gas peddle and located the ECU but only found 2 small holes with no screw.i used a flash light to see if the screw was inside the holes but no luck. the reason I wanted to reset the unit was to see if I can get any response codes so I can diagnose the problem before I take it to Nissan service(the Nissan service in my area have sometimes tried to charge me for things I don't need but thanks to the org and all of you I have dodge that bullet thus far) This is my first post and I just want to say that all of you here have been a great help with all my mods. I hope to try and return the favor one day.

 

Unplug the battery?

 

Thanks for the quick response. How long does it have to be unplugged?

 

unplug negative battery terminal and leave unplugged overnight or a few hours at least.

 

I unplugged mine for about an hour, and I am assuming it worked cause the radio stations and the clock were reset.

 

Ahh...great minds think alike. We replied with the same info at practically the same time.

 

An hour may not be enough... the clock and radio stations reset whenever you lose power I think. Just to be safe, I would leave it unplugged for a few hours at least.

 

Doh...switched the order on me again. I need to remember to stick something in the subject line.

 

I just wanted to say thanks to mbcp_tdogg & UMD_MaxSE for the help. It worked (Not that i doudted you)I unplug the battery in the morning after getting your reply and re-attached the cable at aproximatly 5 pm. I hope to return the favor one day.