5th Generation Maxima (2000-2003) Learn more about the 5th Generation Maxima, including the VQ30DE-K and VQ35DE engines.

AE Door Sills?

Old Sep 22, 2001 | 07:51 PM
  #1  
Newman's Avatar
Thread Starter
Senior Member
iTrader: (3)
 
Joined: May 2001
Posts: 3,288
AE Door Sills?

you can give me a hard time if you'd like but i have to ask: what are door sills and whats different about the AE door sills?
Old Sep 22, 2001 | 08:10 PM
  #2  
Tanman's Avatar
Donating Maxima.org Member
 
Joined: Aug 2001
Posts: 2,267
Re: AE Door Sills?

Originally posted by Newman96SE
you can give me a hard time if you'd like but i have to ask: what are door sills and whats different about the AE door sills?
Open your front driver side door, look down at the bottom area next to your seat at the edge of where the door goes. The plastic bar that covers the rim of the door, that's a door sill. One for each door. They're the same color as the interior of your car.

AE sills are have a metal insert with the word MAXIMA embossed on them. They look very classy and refined. They were originally offered with the 2001 Anniversary Edition Maxima SE (hence, AE), but can be bought aftermarket for other 5th gen Maximas.
Old Sep 22, 2001 | 08:27 PM
  #3  
jkratzer's Avatar
Senior Member
 
Joined: Aug 2001
Posts: 657
Re: Re: AE Door Sills?

Originally posted by Tanmann9


Open your front driver side door, look down at the bottom area next to your seat at the edge of where the door goes. The plastic bar that covers the rim of the door, that's a door sill. One for each door. They're the same color as the interior of your car.

AE sills are have a metal insert with the word MAXIMA embossed on them. They look very classy and refined. They were originally offered with the 2001 Anniversary Edition Maxima SE (hence, AE), but can be bought aftermarket for other 5th gen Maximas.
How does one replace these sills. Do they just pry off? I don't see any screws holding them on.
Old Sep 22, 2001 | 08:28 PM
  #4  
Tanman's Avatar
Donating Maxima.org Member
 
Joined: Aug 2001
Posts: 2,267
Re: Re: Re: AE Door Sills?

Originally posted by jkratzer


How does one replace these sills. Do they just pry off? I don't see any screws holding them on.
Yep, there's actually slots under the sill, three on the fronts, two on the backs. Just stick a cloth-covered screwdriver into the slot and pry up. They're pretty sturdy plastic, so no real danger of breaking them.
Old Sep 22, 2001 | 08:29 PM
  #5  
Maximum Velocity's Avatar
Senior Member
iTrader: (3)
 
Joined: Nov 2000
Posts: 1,612
Re: Re: Re: AE Door Sills?

Originally posted by jkratzer


How does one replace these sills. Do they just pry off? I don't see any screws holding them on.
Just prys right off...give it a good tug, and viola!
Old Sep 22, 2001 | 08:38 PM
  #6  
MaxSEAE's Avatar
Senior Member
 
Joined: Mar 2001
Posts: 370
if your thinking of getting one, there is a thread currently active about an indiglo sills for a good price, check it out...it's kol. either the indiglo or ae are both extremely nice, you can't go wrong either way.
Old Sep 22, 2001 | 10:33 PM
  #7  
Menasor's Avatar
Senior Member
iTrader: (2)
 
Joined: Mar 2001
Posts: 1,257
From: So Cal. (951,909)
Check out www.courtesyparts.com and scroll down a bit and you will see what they look like. They're very nice and i will be getting some eventually.
Old Sep 22, 2001 | 10:42 PM
  #8  
Ludacris's Avatar
Senior Member
iTrader: (11)
 
Joined: Jun 2001
Posts: 3,668
From: S O C A L
Yeah, they gotta be the easiest things to install other than seatbelt pads Takes 2 min of your time all u gotta do is pull the plastic ones off (after using a screwdriver to lift it up) and click the aluminum AEs in.

They look classy and all, but there are better ways to spend $60-80. You only see the sills when the doors are open, so it's pretty much useless to have fancy looking ones IMO. Even if I think that I still like em and won't be putting the cheap 5 cent plastic ones Nissan installs back on
Old Sep 23, 2001 | 06:17 AM
  #9  
Shinnjee's Avatar
Senior Member
 
Joined: Jun 2001
Posts: 277
Re: AE Door Sills?

Originally posted by Newman96SE
you can give me a hard time if you'd like but i have to ask: what are door sills and whats different about the AE door sills?
I got my from Tustin Nissan. About $14 for fronts (each) and $12 for the backs (each). They are way nicer than the plastic ones.
Old Sep 23, 2001 | 08:53 AM
  #10  
Tanman's Avatar
Donating Maxima.org Member
 
Joined: Aug 2001
Posts: 2,267
Originally posted by Menacer
Check out www.courtesyparts.com and scroll down a bit and you will see what they look like. They're very nice and i will be getting some eventually.
Actually, you have to navigate to the Maxima 2000-2002 section. Or go to this link:
http://www.courtesyparts.com/secondtier_a33.html

Then scroll down to 20th Anniversary Edition Parts.
Old Sep 23, 2001 | 09:20 AM
  #11  
AdamK's Avatar
Senior Member
iTrader: (1)
 
Joined: May 2001
Posts: 1,663
I got myne from DAVEB at northtown for 60.00 shipped, they are super classy and install in a jiffy, i just ripped off the old ones with my bear hands
Old Sep 23, 2001 | 09:36 AM
  #12  
Colonel's Avatar
Old Fuddy Duddy
 
Joined: Feb 2001
Posts: 2,712
Originally posted by AdamK
I got myne from DAVEB at northtown for 60.00 shipped, they are super classy and install in a jiffy, i just ripped off the old ones with my bear hands
yup, no need to use a screwdriver. Just tug one end and it will be very clear how easy it is to pop them off and install new ones. No need to risk using a screwdriver and scratch your fragile paint
Old Sep 23, 2001 | 10:45 AM
  #13  
rocketshipon19"'s Avatar
Senior Member
 
Joined: Apr 2001
Posts: 723
Re: Re: Re: Re: AE Door Sills?

Do you play the viola? j/k! II think you meant to say vwolla!



Originally posted by Maximum Velocity


Just prys right off...give it a good tug, and viola!
Old Sep 23, 2001 | 11:20 AM
  #14  
Maximum Velocity's Avatar
Senior Member
iTrader: (3)
 
Joined: Nov 2000
Posts: 1,612
Originally posted by AdamK
I got myne from DAVEB at northtown for 60.00 shipped, they are super classy and install in a jiffy, i just ripped off the old ones with my bear hands
He means DaveB from Town North.
Old Sep 23, 2001 | 03:00 PM
  #15  
Menasor's Avatar
Senior Member
iTrader: (2)
 
Joined: Mar 2001
Posts: 1,257
From: So Cal. (951,909)
Originally posted by Tanmann9


Actually, you have to navigate to the Maxima 2000-2002 section. Or go to this link:
http://www.courtesyparts.com/secondtier_a33.html

Then scroll down to 20th Anniversary Edition Parts.
Oopps, Good looking out.
Old Sep 23, 2001 | 03:03 PM
  #16  
AdamK's Avatar
Senior Member
iTrader: (1)
 
Joined: May 2001
Posts: 1,663
Originally posted by Maximum Velocity


He means DaveB from Town North.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
REDinLV
7th Generation Maxima (2009-2015)
5
Aug 15, 2024 12:30 AM
trsandrew
7th Generation Maxima (2009-2015)
17
Apr 8, 2016 06:45 PM
magiconthetire
Audio and Electronics
2
Oct 26, 2015 09:03 PM
trsandrew
Group Deals / Sponsors Forum
2
Oct 25, 2015 02:47 PM
lrb6805
4th Generation Maxima (1995-1999)
0
Sep 24, 2015 05:03 PM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 05:25 AM.