CHECK THIS OUT!! My CAI w/pics
10-28-2001, 08:30 PM
#1
Member
Thread Starter
Join Date: Sep 2001
Posts: 87
CHECK THIS OUT!! My CAI w/pics
Well I got it all put on. You won't believe the gain I got.
Before I posted the following times:
0-60= 6.9
1/4=15.34 manually shifting the auto
After the mod:
0-60= 6.52
1/4= 14.89
I have pictures of what I did at the following link
http://community.webshots.com/album/24144333ApbgZpwNer
Before I posted the following times:
0-60= 6.9
1/4=15.34 manually shifting the auto
After the mod:
0-60= 6.52
1/4= 14.89
I have pictures of what I did at the following link
http://community.webshots.com/album/24144333ApbgZpwNer
10-28-2001, 09:01 PM
#2
Senior Member
Join Date: Jan 2001
Posts: 3,628
Re: CHECK THIS OUT!! My CAI w/pics
Originally posted by jderry3
Well I got it all put on. You won't believe the gain I got.
Before I posted the following times:
0-60= 6.9
1/4=15.34 manually shifting the auto
After the mod:
0-60= 6.52
1/4= 14.89
I have pictures of what I did at the following link
http://community.webshots.com/album/24144333ApbgZpwNer
Well I got it all put on. You won't believe the gain I got.
Before I posted the following times:
0-60= 6.9
1/4=15.34 manually shifting the auto
After the mod:
0-60= 6.52
1/4= 14.89
I have pictures of what I did at the following link
http://community.webshots.com/album/24144333ApbgZpwNer
10-28-2001, 09:03 PM
#3
Member
Thread Starter
Join Date: Sep 2001
Posts: 87
Re: Re: CHECK THIS OUT!! My CAI w/pics
Originally posted by AznWontonboy
if this was GTECH, did you use the same stretch of road? That would be much more accurate than switching roads.
if this was GTECH, did you use the same stretch of road? That would be much more accurate than switching roads.
thats crazy good.... very professional. Reminds me of the PRCAI.
10-29-2001, 10:17 AM
#13
jderry3,
Where is the cone filter "sitting"??
Is it right behin the air dam or under the splash gaurd?
Very neat how you just ghetto rigged a PRCAI, hmmmmmm you wanna go in business with this item?
Where is the cone filter "sitting"??
Is it right behin the air dam or under the splash gaurd?
Very neat how you just ghetto rigged a PRCAI, hmmmmmm you wanna go in business with this item?
10-29-2001, 11:54 AM
#15
Member
Thread Starter
Join Date: Sep 2001
Posts: 87
Re: Nice!
Originally posted by IceY2K1
How did you get into the fender or infront of the radiator? Where did you drill a hole?
Look great!
How did you get into the fender or infront of the radiator? Where did you drill a hole?
Look great!
Right above the plastic splash guard.
10-29-2001, 11:57 AM
#16
Re: Re: Nice!
Originally posted by jderry3
The filter is to the left of the radiator, underneath the battery.
Right above the plastic splash guard.
The filter is to the left of the radiator, underneath the battery.
Right above the plastic splash guard.
10-29-2001, 12:07 PM
#17
Member
Thread Starter
Join Date: Sep 2001
Posts: 87
Re: Re: Re: Nice!
[QUOTE]Originally posted by BigDogJonx
How does it get alot of air to it? from the air damn ? [/QUOTE
its just not choked up like the factory tube is, and is pulling air from under the car. I think there is enough preshure there that is going to get a good stream of cool air.
How does it get alot of air to it? from the air damn ? [/QUOTE
its just not choked up like the factory tube is, and is pulling air from under the car. I think there is enough preshure there that is going to get a good stream of cool air.
10-30-2001, 08:14 AM
#20
Member
Thread Starter
Join Date: Sep 2001
Posts: 87
Originally posted by PhatGuy
How does it sound throughout the rpm band?
How does it sound throughout the rpm band?
10-30-2001, 10:20 AM
#21
Guest
Posts: n/a
Originally posted by jderry3
Under noraml throttle you cannot hear a difference. It is still pretty quite. However, at WOT, there is a noticeable difference though. Everyone I show it to thinks it makes the car sound a lot meaner.
Under noraml throttle you cannot hear a difference. It is still pretty quite. However, at WOT, there is a noticeable difference though. Everyone I show it to thinks it makes the car sound a lot meaner.
10-31-2001, 04:28 AM
#23
Senior Member
Join Date: Sep 2000
Posts: 310
awesome man
Sweet, I think you did a good job. I tried the same thing a while ago but could not fiond prober tubing. Where did you get that tubing?? Also not to knock your write up.. I think alot of people would appreciate it around here if you did a real through write up. Listing parts/price and where you got them. Also, I do not think you need to paint it cause it matches the block 
. BUT you do need to get rid of the orange stuff used under the fasteners, get some black stuff But yeah man looks good, why did you move the mass air all the way down? Or is it down there on a 2k2.. 
. BUT you do need to get rid of the orange stuff used under the fasteners, get some black stuff But yeah man looks good, why did you move the mass air all the way down? Or is it down there on a 2k2..
Thread
Thread Starter
Forum
Replies
Last Post
DC_Juggernaut
7th Generation Maxima (2009-2015)
4
09-28-2015 04:07 PM
rbaker100
8th Generation Maxima (2016-)
4
09-25-2015 07:52 PM