Alright, so i just fixed my VIAS...
#1
Alright, so i just fixed my VIAS...
Alright, yesterday i reinstalled my JB welded VIAS in hope that it would fix my problem i am having wit the car. The cup was welded stationary and left overnight with Kwik. Anyways, i expected this to resolve the troubles i am having with my acceleration but no.
What is causing my car to just in a way stop accelerating after 3500 RPM's?!
Is this something to do with maybe a clogged cylinder or?!
Literally i will accelerate and if i don't put the pedal to the medal the car will just accelerate fast to 3000 but then all of a sudden slow down and i will in a way be pushed forward as a result of the loss in power...
Anyone?!
Thanks,
Ti
What is causing my car to just in a way stop accelerating after 3500 RPM's?!
Is this something to do with maybe a clogged cylinder or?!
Literally i will accelerate and if i don't put the pedal to the medal the car will just accelerate fast to 3000 but then all of a sudden slow down and i will in a way be pushed forward as a result of the loss in power...
Anyone?!
Thanks,
Ti
Last edited by tibal; 05-13-2008 at 07:25 AM.
#11
OKay soooo.. I drive down to Car Quest last night, where with my dads discount i ordered the new MAF for 93$ to come in around this time. I get in the Max, drive out of the parking lot, and as i am shifting from 2nd to 3d, i feel no lag.. nothing... What the hell.
I just took it on the highway to double check, and i easily brought the car up to 5-5.500 rpms up to 90mph and i am not having the problem. Why?!
Soo long story short, does it take maybe a little bit for the VIAS to actually realize its fixed? Because yesterday and today i am not having any trouble at higher rpm's.
Anyone have this experience?
They are going to hold it for a week just in case..
I just took it on the highway to double check, and i easily brought the car up to 5-5.500 rpms up to 90mph and i am not having the problem. Why?!
Soo long story short, does it take maybe a little bit for the VIAS to actually realize its fixed? Because yesterday and today i am not having any trouble at higher rpm's.
Anyone have this experience?
They are going to hold it for a week just in case..
Thread
Thread Starter
Forum
Replies
Last Post
HerpDerp1919
3rd Generation Maxima (1989-1994)
2
09-29-2015 02:02 PM