Rear Shock Mount Question

Reply Subscribe

Thread Tools

Search this Thread

Sep 30, 2008 | 09:50 AM

MaxManOhio

Thread Starter

Junior Member

Joined: Aug 2008

Posts: 35

Rear Shock Mount Question

I installed new rear shocks on the 2000 max. The lower mounting bolt stripped so I went to the dealer to order. When I looked over the diagram, I saw two parts I did not replace. One is a seal (part number 55338) and a plate (55249) which I believe is actually a gasket like material. The seal looked completely deteriorated so I figured it did not matter if there was one or not. I assume it is there to stop water from leaking in, but I figured the rubber mount would do that. One question, do I need that seal?

So any thoughts? Thanks guys

Last edited by MaxManOhio; Sep 30, 2008 at 11:47 AM.

Sep 30, 2008 | 03:42 PM

VQP0WER

Senior Member

Joined: May 2008

Posts: 1,767

From: Moore, OK

I believe it's to prevent metal to metal chaffing. You should be ok, but you might get some annoying squeking noise.

We are talking about #3 in this diagram?

Last edited by VQP0WER; Sep 30, 2008 at 03:46 PM.

Sep 30, 2008 | 06:24 PM

Drockb418

Senior Member

iTrader: (10)

Joined: May 2007

Posts: 1,393

From: Edmond Oklahoma

hey where did you get that info page from

Oct 1, 2008 | 05:43 AM

ecrash

Member

iTrader: (2)

Joined: Nov 2007

Posts: 51

Quote:

Originally Posted by Drockb418

hey where did you get that info page from

I think it's from the FSM.

Oct 1, 2008 | 06:17 AM

MaxManOhio

Thread Starter

Junior Member

Joined: Aug 2008

Posts: 35

My computer at work will not let me see the diagram. But I assume, yes it is what you are pointing out. It is just that, a cushion between the mount and the inside firewall. I went and bought two. I still have the car jacked up and the wheels off so I figure I will put the seal in. The last thing I want is any noises.