What is the % of tint in maxima factory glass
What is the % of tint in maxima factory glass
What is the % of tint in maxima factory glass.
I want to tint my back to 35% (legal in mass to 35%)
A tint place told me
However, if you apply the tint, the percentage does multiply. For example, if the factory tint on the window is 35%, which let 35% visible light coming through, and you apply another 35% tint over it. The final tint shade will be 35% x 35% which comes out 12%, which means it only lets 12% light come through
Any thoughts on the maxima oem glass % level ?
The specs/sticker say "tinted" only
I want to tint my back to 35% (legal in mass to 35%)
A tint place told me
However, if you apply the tint, the percentage does multiply. For example, if the factory tint on the window is 35%, which let 35% visible light coming through, and you apply another 35% tint over it. The final tint shade will be 35% x 35% which comes out 12%, which means it only lets 12% light come through
Any thoughts on the maxima oem glass % level ?
The specs/sticker say "tinted" only
In new york, the front side and backside windows have to be 70% of outside lights come in, so i assume that the factory windows are 70%.
http://www.tintcenter.com/laws/NY/
http://www.tintcenter.com/laws/NY/
Last edited by SoulEater; May 8, 2009 at 09:39 AM.
I had no idea that the car is tinted from the factory. Mine does not look like it if it was. It does make sense that if there is factory tint that an aftermarket tint film will decrease the visible light transmission percentage.
What is the % of tint in maxima factory glass.
I want to tint my back to 35% (legal in mass to 35%)
A tint place told me
However, if you apply the tint, the percentage does multiply. For example, if the factory tint on the window is 35%, which let 35% visible light coming through, and you apply another 35% tint over it. The final tint shade will be 35% x 35% which comes out 12%, which means it only lets 12% light come through
Any thoughts on the maxima oem glass % level ?
The specs/sticker say "tinted" only
I want to tint my back to 35% (legal in mass to 35%)
A tint place told me
However, if you apply the tint, the percentage does multiply. For example, if the factory tint on the window is 35%, which let 35% visible light coming through, and you apply another 35% tint over it. The final tint shade will be 35% x 35% which comes out 12%, which means it only lets 12% light come through
Any thoughts on the maxima oem glass % level ?
The specs/sticker say "tinted" only
The reason the sticker says "tinted" is because of that slight impedance I was talking about. Actually, Come to think of it, The Max may have a very slight solar tinting with it, kind of like the glasses that tint in the sun.
Personally, I would get them to meter the film straight out of the box. If it meters close to 35 then just do it. Make sure to get a receipt stating that they installed your states legal limit.
Deckdout2, That film you got probably metered lower than 20% before it was even on the glass. A few film companies do that for some reason. Most Suntek films meter lower than what the box of film says.
In new york, the front side and backside windows have to be 70% of outside lights come in rear, so i assume that the factory windows are 70%.
http://www.tintcenter.com/laws/NY/
http://www.tintcenter.com/laws/NY/
Any glass at all will decrease VLT when window film is applied.
The limit in NY applies to cars I believe, most states including Va have different laws for vans, trucks, suvs and wagons because they are considered multi purpose vehicles.
However, if you apply the tint, the percentage does multiply. For example, if the factory tint on the window is 35%, which let 35% visible light coming through, and you apply another 35% tint over it. The final tint shade will be 35% x 35% which comes out 12%, which means it only lets 12% light come through
Any thoughts on the maxima oem glass % level ?
Any thoughts on the maxima oem glass % level ?
Yours will probably meter right around that 40% mark like you said.
Thread
Thread Starter
Forum
Replies
Last Post
ef9
4th Generation Maxima (1995-1999)
10
Aug 14, 2015 03:03 PM
Superbform
Audio and Electronics
1
Aug 11, 2015 08:10 PM
altome15
7th Generation Maxima (2009-2015)
5
Aug 10, 2015 07:05 PM
MikesChevelle
5th Generation Maxima (2000-2003)
4
Aug 6, 2015 11:36 AM
ViciousVQ30
4th Generation Classifieds (1995-1999)
0
Aug 5, 2015 05:40 PM




