I have 02 Maxima 6spd. I got it all wired up and double check all the wires and plug the EU and try to turn car on. It won't crank. I bought EU used from guy who had RB26 in 240z. So I though the jumper setting is different probably that is why it's not cranking. I checked the setting did the same setting as what would 350z guys would do. Still nothing. It won't crank. So I got tired of it and took all the wires out and connect all the wires back to factory setting. Car turns on fine. But when I plug the EU it won't crank. Is there any parameter setting I'm missing. I plug the computer to EU to see if it links. It links just fine. Lights turn on in EU. Little help here please.

 

Did you set up the parameter settings right?

 

http://www.vqpower.com/v2/articles.php?article_id=25

 

I looked at all that and setup just like that but except vq30 I selected vq35. I haven't hooked up water temp and intake temp wire because I thought we don't need that for 5.5 gen. Other than that all the wire hooked up right.

 

ok you mentioned you hooked it up like a 350z but they have a slightly different ECU, so I thought you should look at the maxima setup.

 

Wait, i thought you told me it doesnt turn on, but it cranks


but you are saying the starter doesnt even crank?

 

No starter crank. But car doesn't turn on. It feels like its not getting any spark or something.

 

When you going back home kevlo. I might come see you about this.