has any body orderd from.....jdm hub
has any body orderd from.....jdm hub
Has any body orderd from jdm hub they have 00-03 NISSAN MAXIMA MEGAN RACING CAT BACK SYSTEM $303.45 PLUS 15 dollars shipping http://www.jdmhub.com/index.php?rout...duct_id=178781
EDIT This is what you want VVVVVVVVVVV
From Greg Childs of BRM Exhaust:http://forums.maxima.org/5th-generat...an-maxima.html
BRM Exhaust is proud to introduce our catback system for the 00-03 Nissan Maxima!
Construction - All systems are constructed of mandrel-bent, T-304 stainless steel (or aluminized mild steel) in 3" diameter. BRM's systems are not "mass-produced" and are manufactured by hand. Our fabricators have over 100 years combined experience in custom exhaust design, and we recently sold our 700th catback for the S-chassis.
MIG welding is used for most welds, some TIG welding is utilized. Welds are cleaned up afterward for a nicer, finished appearance.
Flanges are 3/8" billet pieces, whereas the competition uses thin, flimsy STAMPED STEEL flanges.
Muffler, resonator, catalytic converter, and tips are ALL Magnaflow units. We've found their stuff to be the best-suited to these applications.
Sound - BRM catbacks are designed for a non-ricey, throaty sound. Deep rumble at idle, and an aggressive, deep tone throughout the RPM range. Can't say much more here, except for NO RICE.
Appearance - BRM believes in maintaining a stock fitment and appearance, and as such, the flashiest thing you'll see is the chrome tips. No weird, unnecessary angled canisters or anything like that. Just clean, timeless style.
Tips - All systems are dual 2.5" beveled chrome tips.
Resonator - 3" systems are only available with the 14" resonator.
Fitment- Our system bolts up to the factory cat flanges and uses the factory hangars.
Pricing – 2000-2003 Nissan Maxima pricing is as follows:
3" Aluminized is $530
3” Stainless Steel is $630
$360 shipped 3'' Aluminized with out muffler
Shipping (48 states) is $45. Shipping to Canada is $75.
Turnaround time is roughly 8 days. Sometimes we're faster!
Aluminized or Stainless - Which to choose? - Aluminized (not aluminum) tubing is a coated mild steel. It's basically what most auto manufacturers use for OEM systems. Not as resistant to corrosion and weighs about a half-pound more. Performance is identical.
Aluminized steel is great if you live in an arid climate and don't really worry about rust. If you live in an area with a lot of snow, rain, or near the ocean, stainless is a smarter choice. Stainless will not corrode and is guaranteed for as long as you own the car.
Contact and ordering -
Email him at greg@nicoclub.com or 602-828-8908
EDIT This is what you want VVVVVVVVVVV
From Greg Childs of BRM Exhaust:http://forums.maxima.org/5th-generat...an-maxima.html
BRM Exhaust is proud to introduce our catback system for the 00-03 Nissan Maxima!
Construction - All systems are constructed of mandrel-bent, T-304 stainless steel (or aluminized mild steel) in 3" diameter. BRM's systems are not "mass-produced" and are manufactured by hand. Our fabricators have over 100 years combined experience in custom exhaust design, and we recently sold our 700th catback for the S-chassis.
MIG welding is used for most welds, some TIG welding is utilized. Welds are cleaned up afterward for a nicer, finished appearance.
Flanges are 3/8" billet pieces, whereas the competition uses thin, flimsy STAMPED STEEL flanges.
Muffler, resonator, catalytic converter, and tips are ALL Magnaflow units. We've found their stuff to be the best-suited to these applications.
Sound - BRM catbacks are designed for a non-ricey, throaty sound. Deep rumble at idle, and an aggressive, deep tone throughout the RPM range. Can't say much more here, except for NO RICE.
Appearance - BRM believes in maintaining a stock fitment and appearance, and as such, the flashiest thing you'll see is the chrome tips. No weird, unnecessary angled canisters or anything like that. Just clean, timeless style.
Tips - All systems are dual 2.5" beveled chrome tips.
Resonator - 3" systems are only available with the 14" resonator.
Fitment- Our system bolts up to the factory cat flanges and uses the factory hangars.
Pricing – 2000-2003 Nissan Maxima pricing is as follows:
3" Aluminized is $530
3” Stainless Steel is $630
$360 shipped 3'' Aluminized with out muffler
Shipping (48 states) is $45. Shipping to Canada is $75.
Turnaround time is roughly 8 days. Sometimes we're faster!
Aluminized or Stainless - Which to choose? - Aluminized (not aluminum) tubing is a coated mild steel. It's basically what most auto manufacturers use for OEM systems. Not as resistant to corrosion and weighs about a half-pound more. Performance is identical.
Aluminized steel is great if you live in an arid climate and don't really worry about rust. If you live in an area with a lot of snow, rain, or near the ocean, stainless is a smarter choice. Stainless will not corrode and is guaranteed for as long as you own the car.
Contact and ordering -
Email him at greg@nicoclub.com or 602-828-8908
Last edited by Clashez; Jun 8, 2011 at 11:13 AM.
well a week later i got this from them...
Your order has been updated to the following status: CANCELED To view your order click on the link below: http://www.jdmhub.com/ The comments for your order are: Hello, Thanks for you order but we currently out of stock on this and really sorry about it. There is no ETA so I will go ahead and cancel the order. Thanks Please reply to this email if you have any questions.
so basicly it seams they dont have there s*** together enough to even know when they are out of stock if it takes them a week to figure it out. Also in several days of calling their number they never once answered the phone. I would shop at your risk from them. For the record though they never did charge my credit card, they basicly just ignored me.
Your order has been updated to the following status: CANCELED To view your order click on the link below: http://www.jdmhub.com/ The comments for your order are: Hello, Thanks for you order but we currently out of stock on this and really sorry about it. There is no ETA so I will go ahead and cancel the order. Thanks Please reply to this email if you have any questions.
so basicly it seams they dont have there s*** together enough to even know when they are out of stock if it takes them a week to figure it out. Also in several days of calling their number they never once answered the phone. I would shop at your risk from them. For the record though they never did charge my credit card, they basicly just ignored me.
well a week later i got this from them...
Your order has been updated to the following status: CANCELED To view your order click on the link below: http://www.jdmhub.com/ The comments for your order are: Hello, Thanks for you order but we currently out of stock on this and really sorry about it. There is no ETA so I will go ahead and cancel the order. Thanks Please reply to this email if you have any questions.
so basicly it seams they dont have there s*** together enough to even know when they are out of stock if it takes them a week to figure it out. Also in several days of calling their number they never once answered the phone. I would shop at your risk from them. For the record though they never did charge my credit card, they basicly just ignored me.
Your order has been updated to the following status: CANCELED To view your order click on the link below: http://www.jdmhub.com/ The comments for your order are: Hello, Thanks for you order but we currently out of stock on this and really sorry about it. There is no ETA so I will go ahead and cancel the order. Thanks Please reply to this email if you have any questions.
so basicly it seams they dont have there s*** together enough to even know when they are out of stock if it takes them a week to figure it out. Also in several days of calling their number they never once answered the phone. I would shop at your risk from them. For the record though they never did charge my credit card, they basicly just ignored me.
I like that one 
email from greg childs rbm about 3'' cat back with opition of no muffler price
Ok, got it...$360 shipped.
On Apr 23, 2011 1:40 AM, "Greg Childs" <greg@nicoclub.com> wrote:
> Hey, my apologies. I should have the info by Monday, my fabricator is out
> for a few days.
>
> Sorry about that!
>
> Thanks -
>
> Greg
>
>
> On Fri, Apr 22, 2011 at 8:23 AM, <y914nickyclashez@aol.com> wrote:
>
>> 3'' Aluminized cat back without muffler for 2003 nissan maxima you said u
>> would get back to me on price
>>
>>
>>
>
>
> --
> Follow me on Twitter http://twitter.com/#!/NICOclub
>
> www.nicoclub.com - The web's largest and most active Nissan enthusiast
> community.
From Greg Childs of BRM Exhaust:
BRM Exhaust is proud to introduce our catback system for the 00-03 Nissan Maxima!
Construction - All systems are constructed of mandrel-bent, T-304 stainless steel (or aluminized mild steel) in 3" diameter. BRM's systems are not "mass-produced" and are manufactured by hand. Our fabricators have over 100 years combined experience in custom exhaust design, and we recently sold our 700th catback for the S-chassis.
MIG welding is used for most welds, some TIG welding is utilized. Welds are cleaned up afterward for a nicer, finished appearance.
Flanges are 3/8" billet pieces, whereas the competition uses thin, flimsy STAMPED STEEL flanges.
Muffler, resonator, catalytic converter, and tips are ALL Magnaflow units. We've found their stuff to be the best-suited to these applications.
Sound - BRM catbacks are designed for a non-ricey, throaty sound. Deep rumble at idle, and an aggressive, deep tone throughout the RPM range. Can't say much more here, except for NO RICE.
Appearance - BRM believes in maintaining a stock fitment and appearance, and as such, the flashiest thing you'll see is the chrome tips. No weird, unnecessary angled canisters or anything like that. Just clean, timeless style.
Tips - All systems are dual 2.5" beveled chrome tips.
Resonator - 3" systems are only available with the 14" resonator.
Fitment- Our system bolts up to the factory cat flanges and uses the factory hangars.
Pricing – 2000-2003 Nissan Maxima pricing is as follows:
3" Aluminized is $530
3” Stainless Steel is $630
Shipping (48 states) is $45. Shipping to Canada is $75.
Turnaround time is roughly 8 days. Sometimes we're faster!
Aluminized or Stainless - Which to choose? - Aluminized (not aluminum) tubing is a coated mild steel. It's basically what most auto manufacturers use for OEM systems. Not as resistant to corrosion and weighs about a half-pound more. Performance is identical.
Aluminized steel is great if you live in an arid climate and don't really worry about rust. If you live in an area with a lot of snow, rain, or near the ocean, stainless is a smarter choice. Stainless will not corrode and is guaranteed for as long as you own the car.
Contact and ordering -
Email him at greg@nicoclub.com or 602-828-8908
Ok, got it...$360 shipped.
On Apr 23, 2011 1:40 AM, "Greg Childs" <greg@nicoclub.com> wrote:
> Hey, my apologies. I should have the info by Monday, my fabricator is out
> for a few days.
>
> Sorry about that!
>
> Thanks -
>
> Greg
>
>
> On Fri, Apr 22, 2011 at 8:23 AM, <y914nickyclashez@aol.com> wrote:
>
>> 3'' Aluminized cat back without muffler for 2003 nissan maxima you said u
>> would get back to me on price
>>
>>
>>
>
>
> --
> Follow me on Twitter http://twitter.com/#!/NICOclub
>
> www.nicoclub.com - The web's largest and most active Nissan enthusiast
> community.
From Greg Childs of BRM Exhaust:
BRM Exhaust is proud to introduce our catback system for the 00-03 Nissan Maxima!
Construction - All systems are constructed of mandrel-bent, T-304 stainless steel (or aluminized mild steel) in 3" diameter. BRM's systems are not "mass-produced" and are manufactured by hand. Our fabricators have over 100 years combined experience in custom exhaust design, and we recently sold our 700th catback for the S-chassis.
MIG welding is used for most welds, some TIG welding is utilized. Welds are cleaned up afterward for a nicer, finished appearance.
Flanges are 3/8" billet pieces, whereas the competition uses thin, flimsy STAMPED STEEL flanges.
Muffler, resonator, catalytic converter, and tips are ALL Magnaflow units. We've found their stuff to be the best-suited to these applications.
Sound - BRM catbacks are designed for a non-ricey, throaty sound. Deep rumble at idle, and an aggressive, deep tone throughout the RPM range. Can't say much more here, except for NO RICE.
Appearance - BRM believes in maintaining a stock fitment and appearance, and as such, the flashiest thing you'll see is the chrome tips. No weird, unnecessary angled canisters or anything like that. Just clean, timeless style.
Tips - All systems are dual 2.5" beveled chrome tips.
Resonator - 3" systems are only available with the 14" resonator.
Fitment- Our system bolts up to the factory cat flanges and uses the factory hangars.
Pricing – 2000-2003 Nissan Maxima pricing is as follows:
3" Aluminized is $530
3” Stainless Steel is $630
Shipping (48 states) is $45. Shipping to Canada is $75.
Turnaround time is roughly 8 days. Sometimes we're faster!
Aluminized or Stainless - Which to choose? - Aluminized (not aluminum) tubing is a coated mild steel. It's basically what most auto manufacturers use for OEM systems. Not as resistant to corrosion and weighs about a half-pound more. Performance is identical.
Aluminized steel is great if you live in an arid climate and don't really worry about rust. If you live in an area with a lot of snow, rain, or near the ocean, stainless is a smarter choice. Stainless will not corrode and is guaranteed for as long as you own the car.
Contact and ordering -
Email him at greg@nicoclub.com or 602-828-8908
Last edited by NmexMAX; Jun 8, 2011 at 11:14 AM.
Thread
Thread Starter
Forum
Replies
Last Post
REDinLV
7th Generation Maxima (2009-2015)
5
Aug 15, 2024 12:30 AM
Andy29
5th Generation Maxima (2000-2003)
8
Sep 29, 2015 05:32 AM
londonflu
3rd Generation Maxima (1989-1994)
40
Sep 25, 2015 09:11 AM
