Rear Main seal , rtv or no?
#1
Rear Main seal , rtv or no?
So im in the middle of a clutch swap. Just waiting for parts. I installed my rear main seal today. The round rubber part of the seal that goes around the crank is nice and snug.
But the bottom of the seal has a tiny gap were the metal meets metal . Looks like oil could easily leak by, I cleaned the area with brake parts cleaner realy well. And I put some high TEMP rtv in the area I have in red on the picture below.
But Im still alittle worried , Is my seal missing something ?
Was RTV a good idea?
RTV Not needed ?
Please share your input. I dont want any leaks when I put this thing back together.
But the bottom of the seal has a tiny gap were the metal meets metal . Looks like oil could easily leak by, I cleaned the area with brake parts cleaner realy well. And I put some high TEMP rtv in the area I have in red on the picture below.
But Im still alittle worried , Is my seal missing something ?
Was RTV a good idea?
RTV Not needed ?
Please share your input. I dont want any leaks when I put this thing back together.
Last edited by maxspeed96CT; 05-31-2011 at 05:26 PM.
#4
heres another thread I found in the 4thgen section.
http://forums.maxima.org/4th-generat...-question.html
It looks like the guy used rtv in the area that Im talking about but I cant tell for sure. I hope I put enough the more i think about it.
#8
#9
Ya I guess ill see how the rtv holds, I do have a good amount in there. if it leak ill know why at least. I looked at the fsm but the link I have is impossible to search through and find anything. So I just went for it..
Thread
Thread Starter
Forum
Replies
Last Post
doctorpullit
8th Generation Maxima (2016-)
11
09-10-2015 06:33 PM
ef9
4th Generation Maxima (1995-1999)
5
09-05-2015 11:18 PM