Greg Childs,owner and operator of Brm Exhaust and CEO over at NicoClub.com. Now has a web site up offering cat backs in 3'', 2.25 and 2.50 sizes for 3rd gen , 5-5.5 gen maxima and i30/135
Product
2000-2003 Maxima (A33) (3", Dual Tip, Stainless Steel) Total SHIPPED: $635.00




Product 2000-2003 Maxima (A33) (3", Single Tip, Stainless Steel) Total SHIPPED: $535.00


You just added "2000-2003 Maxima (A33) (2.5", Dual Tip, None, Stainless Steel)" to your cart. 2000-2003 Maxima (A33) (2.5", Dual Tip, Stainless Steel) Total shipped: $505.00



You just added "2000-2003 Maxima (A33) (2.5", None, Single Tip, Stainless Steel)" to your cart. 2000-2003 Maxima (A33) (2.5", None, Single Tip, Stainless Steel) Total shipped: $475.


They also offering just the piping kit at a good price call up for pricing
(you provied you own muffler and resonater of you chose)
and it's also available in the cheaper aluminized steel set up

Edited let's keep this thread clean please


http://www.brmexhaust.com/00-03-nissan-maxima



Here's all the pic;s you need

 

Niiceee

I know it wouldn't be tooooo different, But i wish they had videos for each exhaust size.

 

That would be cool wouldn't it... maybe even offer test rides for each size to.

 

Unless I missed it, atleast would be nice to see a picture of the exhaust...


...any diameter would be fine with me.

 

505 shipped for the 2.5 inch? You can get a Megan 2.5 inch exhaust with a dual tip muffler for 390 on eBay and even cheaper if you look in the right places.

 

Just saw the video on the site sounds nice and deep!

 

just wow

 

I thought there was already a post on this......

 

Did you get yours yet????

 

I will be getting one (3'')to replace the 3id cat back, I have on my auto and puting the 3id on my 02 6mt Faded Glory project car.

 

 

Yes this one is to promote their web site and diffrent sizes available

They also offer an aluminized steel 2.5 duel tip for 405 shipped.
Megan 2.5 inch exhaust with a dual tip muffler for 390 on eBay that doesn't included shipping

If you can find megan cheaper then you should get it , just helping out brm and putting thier web site out . So people know we got more choses like the 2.25 and 2.50 sizes in duel or single tip

 

In case anyone is wondering about BRM Exhaust... running WHOIS against the domain lists a guy named Greg Childs, who is listed as CEO over at NicoClub.com.

In other words, it certainly seems legit.

Good info so far, Clashez.

 

Why thank you sir, Added some of the info you listed in OP

 

Nice, but don't have another Maxima for this and won't kick my Cattman 3" to the curve...

 

Idk where you are getting your pricing but u might want to check again because the 3" dual tip I believe is close to $650 shipped off their website

 

If you need a pics of it:

http://s139.photobucket.com/albums/q...ssan%20Maxima/

OP add this to the first post. I've been a bit lazy but I need to post a vid of it now broken in. I have the 3in Aluminized version.

BTW if you get this make sure you buy hose clamps for the bushings. It's a really tight fit around the rear axle.

 

fixed that was the price witout the resonater, My mistake

Thanks bud will do now

 

pics of the single tip?

 

I'm sure the single tip will look just like Custom Maxima's with BRM piping. Or you can look at the 240's single tip and get an idea.

 

Anybody know how the 2.5 sounds compare to a 2.5 cattman?

 

More then likely sound the same just go 3'' you won't regret it , if your worrying about sound and your not getting headers then 3'' will sound great...

 

Thought you had yours by now!

 

No was holding off on it, til i got this other car. I'm ordering just the pipping kit tho and just go with my own reasonater and muffler combo

Then i'm going to take out the 3id out the auto and install it in the 6 speed. right now just a lot of opitions in the air one is even just doing a 6 speed swap in the auto, the body on the 6 speed is pretty beatin up.
so thats why i'm no big rush to get the BRM cat back, just trying to spread out the good word.

 

What's this 3id thing? 3" I.D.? Or Is that like an I.D.ten T?

 

My cat-back is 3'' inside diameter ID , Yours is 3'' outside diameter OD

 

I think you missed the clever.

 

Exhaust tubing is measured by O.D. and Intake tubing is measured by I.D.! So apparently you have a 3.125" or 3.250" exhaust !!!!

 

The dynojet doesn't lie

 

I was puzzled at why this exhaust measured over 3". maybe around the bends it gets to 3" but the straight parts are a bit larger than 3".

 

On thier site?? i dont see any 240sx single tip pics...i just want to know what the muffler is going to look like really

So which is it?? a real 3" or a 3" with a larger OD?? would i have problems bolting up a 3" test pipe to it because of this?

 

The outside diameter could be about 3.250'' or more , when the exhaust guy mated the muffler he had to expaned the inlet of the muffler. To slip over the pipe cuz the pipe of the cat back just swallowd the inlet of the 3'' muffler.

 

should be fine because mine is bolted to the stock cat.

http://youtu.be/9FpXeE1ns94 This might be what it looks like...might as well go with dual tip so it doesn't look so flashy.

 

Yeah your right! My Cattman is 3" OD and your BRM has portion of their sections where it's over 3" cause it's expanded for a slip fit design....Sounds like some good (I.D.TEN"T" )engineering!

Measure the Most forward (cat) flange piping I.D.!

 

I don't have a BRM cat back got mine custom made.

 

Do you think that will fit my truck?

 

What is that grey goo where the pipe connects to the muffler? looks like its smaller. Is this the 3" that is pictured?

 

So if you measured it...How much bigger is it? A few thousands, .100", .125", .200", .250"????? Get my drift much bigger???? I just got the feeling you're talking .030"-.070".......

 

I don't know see this is the story i went to the exhaust shop told the guy i wanted an 3'' exhaust from the cat- back. He looked at me like i was crazy and said are you sure, we use that on trucks. I was like yea im sure . so he started to get it all togethier. When he got to the part were he was goin to weld on the muffler. The piping of the exhaust swollowed the inlet of the muffler. He said i thought you wanted a 3'' cat back, this muffler is 3''od. This set up i made for you car is 3''id, So he expanded the inlet to fit around the muffler.

 

put it this way when he stuck my inlet in the piping thier was a lot of wiggle room a lot...... i could take a pic so you can see what i'm talking about