ranmas2004

iTrader: (2)

Just wanted to post just in case anyone was wondering how the Mishimoto Radiator looked in a 5.5 gen. I bought some 12" blue slim fans off eBAY and a nice looking blue radiator cap cover that I seen on the "what do you do to make your engine bay pretty" forum. I also bought brand new upper radiator mounts and powder coated them Candy blue. Its sparkling silver, then candy blue and a top coat over that. Turned out BEAUTIFUL!!!

mrjamaica98mx

iTrader: (10)

looking nice "w upper radiator mounts and powder coated them Candy blue" how much this cost u?

essential1

iTrader: (5)

Looks good man. I know the car is currently in the shop being worked on, but polish up the rest of the details in the bay when it comes out. The VTC selinoid and the timing cover takes away from how nice the other accents are. But good job on the car so far. Its gonna be a beast when you're done with that haltech.

knight_yyz

iTrader: (40)

this is the 4th gen rad?

ranmas2004

iTrader: (2)

cost me $0 I did it myself, only paid for the powder I have a powder coating gun....this one...




Thanks bro...plan on cleaning it up with a rag when it gets done. Im not spending any extra on the timing cover at all...that cost too much money and basically have to take whole engine out......lol. Ive spent enough...lol.



yup...fits like a glove in the 5th gen!!

mrjamaica98mx

iTrader: (10)

[QUOTE=ranmas2004;8472438]cost me $0 I did it myself, only paid for the powder I have a powder coating gun....this one...


cool u should sell me yours and do a sec set js keep up the good work

T_Behr904

Looks good!

I have been thinking about getting one of these radiators, but I'd probably would clean up and reuse the factory electric fans/shroud.

Rods03Max619

iTrader: (5)

Looking Good....

DjHackStyle

Awesome radiator, whats the price on the radiator?

ranmas2004

iTrader: (2)

I think its about $300 there is a sponsor in the sponsor section that sells them.

WhoDatBuuL

iTrader: (13)

i got the same thing !!! LOVE IT , you ran does ur car run lean with that mini crank case ?

ranmas2004

iTrader: (2)

mini crank case??? you talking about the breather filter? No, it doesn't run lean because of that I have a tune. If you are not tuned you need to remove BOTH the front and rear and replace with breather filters.

cjandura

iTrader: (3)

What oil cooler you pick up to go with it?

ranmas2004

iTrader: (2)

there is no oil cooler......

WhoDatBuuL

iTrader: (13)

well i kno where the one , but where is the other ?
and are u goin next weekend ?

RR5

iTrader: (6)

There is a AT fluid cooler mounted on the bottom of the OE 5.5 gen radiator.

deloa84

iTrader: (5)

I bought this same radiator for my 3.5 swap from this guy on ebay.. made the guy an offer at 160 and I got it, free shipping...

It is not this guy but I would give it a shot, worst they can say is no..
http://www.ebay.com/itm/MISHIMOTO-RA...39f851&vxp=mtr

5th gen junkie

iTrader: (1)

look good bro

nismonegro26

iTrader: (1)

I've got one too. I makes the engine bay look a lot cleaner. I was on my third plastic radiator and found this mishimoto on ebay for 140. Im auto so I had to use a external transmission cooler set up.

Shift_Max

iTrader: (18)

I need to pick one up.

cjandura

iTrader: (3)

Wait 3.5 has lines for oil cooler on pass side did you bypass it or get a different unit?

ranmas2004

iTrader: (2)

I have a MT there is no AT fluid cooler..

I think thats why you are running lean.....you need to remove both. The other location that needds a filter is in the back of the engine on the rear crank case up under the IM:



I wont be at the meet next week because car is still in the shop and I have a performance next weekend anyway. There will be plenty of meets this summer that I will be going to though. You'll be seeing me around trust me...lol!!


I think you are thinking about the Auto Tranny and I have a MT. It was as simple as removing the old and dropping the new one it....really that simple. No oil lines no transmission lines...nothing. I bought all new rubber mounts for upper and lower and brand new upper brackets just because its an old car and they were really cheap from the dealer. Better safe than sorry.

I also got new coolant lines in and going to powdercoat those as well!!! Something like this but candy blue:



I also got the side part and connecting little elbow that the lines connect to and powdercoating those as well!!

I really would like to get a new timing cover and polish that but thats just way too much money.....having to take the freakin engine out and do all that work....forget it, not worth it to me.

nismonegro26

iTrader: (1)

I have an auto and the stock radiator has coolant lines that run through the bottom the radiator. All I did was buy a Hayden aftermarket cooler and put it in front of the condenser and ran the line to that. The external cooler IMO runs cooler. After driving I can put my hand on it and it warm, also when the fans cut on its pulling air through it.

CMax03

iTrader: (3)

This Radiator looks sweet! Is it a double row all aluminum or just a single row? I'm interested in this if the Oem fan setup will bolt to it! I'm interested if the Oem shroud fit and bolts too it cause not having a shroud causes your radiator to be less efficient @ cooling your engine....as for the built in liquid to liquid oil cooler I would go big as possible with an external transmission oil cooler to ensure it's more than enough to cool my tranny especially on a hot day of track use....

knight_yyz

iTrader: (40)

You can use the OEM shroud. I'm thinking of doing the same thing. My rad just has a pinhole leak, I'm waiting to see if I have to wait a day or two or a week or two for this one.

nismonegro26

iTrader: (1)

The stock fans fit, just have to zip tie the bottom. I have a bar and plate type of tranny cooler, I can tell a difference the tranny has nice firm shifts all the time now. Instead of after a few hours of drive and getting that slipping type of shift. The test was when I was in stop and go traffic in Atlanta for import alliance.

ShocknAwe

iTrader: (3)

does the 5th gen scape on the hood like the 4th gen does? Thats my only issue with my Mishimoto. About a 1/4in to tall and scrapes on the bottom of my hood.

nismonegro26

iTrader: (1)

No issues with it scraping

ranmas2004

iTrader: (2)

me either...seems like an install issue.

ranmas2004

iTrader: (2)

I have no idea.....

infinimax96

I had this issue with mine on my 4th Gen. I swapped the raditor cap with the oem cap and it doesn't scrape anymore.

deloa84

iTrader: (5)

Encountered the same problem. I just tapped under the hood with a hammer and a flathead screwdriver and problem fixed..

WhoDatBuuL

iTrader: (13)

how on earth are you doin all this powdercoating lol

ranmas2004

iTrader: (2)

Maybe thats why, because Im using OEM cap not Mish cap.



got a powdercoating gun

nismonegro26

iTrader: (1)

Im using the mishimoto cap and its a two row radiator

WhoDatBuuL

iTrader: (13)

and where u put the stuff at in the oven ?

ranmas2004

iTrader: (2)

yes sir! I do small parts so its OK in the oven. I don't know about large parts. But I've know people who have powdercoated their intake manifold and used their home oven and it worked.......

Shift_Max

iTrader: (18)

Do you know or can you measure the thickness of the core?

MaximaRyder02

Does the 4th Generation radiator fit the 5.5 withhout an issue or do they make one for the 5.5? I have a 2002 with a 6spd and wanted to get an aluminum radiator that woud fit like oem. Thanks.

cjandura

iTrader: (3)

Yes and slight adjustment needed search is your friend