traction control light and TC off light stay on
#1
traction control light and TC off light stay on
I've had the cv shaft out, because a shop had installed the wrong cv shaft, i changed transmission oil, bleed the brake fluid with Dot 3 and all of a sudden I'm driving and the lights come on...the brakes start seizing only in the front.
I've replaced one caliper, both front pads and rotors. This hasn't changed anything, I think its the master cylinder, but I'm not sure why the TC light and TC off light are on...I think these have something to do with the brake problem, only I haven't been able to find out what else these lights would mean, other then the obvious.
I've replaced one caliper, both front pads and rotors. This hasn't changed anything, I think its the master cylinder, but I'm not sure why the TC light and TC off light are on...I think these have something to do with the brake problem, only I haven't been able to find out what else these lights would mean, other then the obvious.
#2
okay so i have to revise this slightly...I have the slip/tsc off/engine light come on, the seizing brakes were fixed. my problem is that when i reset the codes and drive it around none of the lights come on, the moment i shut it off for five minutes then the lights come back on...I'm seriously stumped
#4
the check engine is related to the misfire on cylinder no 3 which is now fixed.
The slip/off TCS are the lights on the dash now but no ABS, yes I already read the other threads, randomly replacing sensors seams sort of expensive.
The slip/off TCS are the lights on the dash now but no ABS, yes I already read the other threads, randomly replacing sensors seams sort of expensive.
Thread
Thread Starter
Forum
Replies
Last Post
King_Ten_Ahead
5th Generation Maxima (2000-2003)
14
09-30-2015 04:27 PM
MaximaDrvr
7th Generation Maxima (2009-2015)
16
08-19-2015 08:20 PM