Won't rev past 2.5k
05-26-2013, 10:48 AM
#1
Junior Member
Thread Starter
Join Date: Dec 2008
Location: Belleville, NJ
Posts: 27
Won't rev past 2.5k
In any gear or neutral. I have the SES light on, the only code is the EGR valve, I took it to a shop to get my AC repaired and the guy tells me the EGR has nothing to do with this, then he asks me if the vehicle has been chipped, and I don't even know if you can do that to a 2k Maxima. What could be the issue?
05-26-2013, 10:51 AM
#2
Supporting Maxima.org Member
Join Date: Sep 2000
Posts: 2,038
In any gear or neutral. I have the SES light on, the only code is the EGR valve, I took it to a shop to get my AC repaired and the guy tells me the EGR has nothing to do with this, then he asks me if the vehicle has been chipped, and I don't even know if you can do that to a 2k Maxima. What could be the issue?
05-26-2013, 12:34 PM
#5
Maf sensor i think can still not be working right even if it doesnt throw the code. I think when the maf sensor is just pretty my not working is when it throws a MAF code. But like me right now, I think my maf is on the fritz and its not throwing a code but i THINK its also causing me to get a false VIAS code. So yeah im working on that. But typical if you not revving over "2500" especially that number is MAF. But yeah I think if it was EGR there are threads about cleaning it.
05-26-2013, 07:08 PM
#10
Senior Member
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 539
05-27-2013, 03:38 PM
#11
How is that a fail....i said get a maf just like u said, and if you read through the forums, and from experience, The MAF might not throw a code on its way going out. And usually when people(noted on the forums and through experience) can't rev past 2500 it points towards the maf. So how is that a fail? :-/
Last edited by NYTooCooL; 05-27-2013 at 03:41 PM.
05-27-2013, 03:49 PM
#12
Senior Member
Join Date: Sep 2012
Location: Vancouver, Canada
Posts: 315
Maf sensor i think can still not be working right even if it doesnt throw the code. I think when the maf sensor is just pretty my not working is when it throws a MAF code. But like me right now, I think my maf is on the fritz and its not throwing a code but i THINK its also causing me to get a false VIAS code. So yeah im working on that. But typical if you not revving over "2500" especially that number is MAF. But yeah I think if it was EGR there are threads about cleaning it.
What you are trying to say is " replace your MAF "
What came out was " dsfdsjiewfnwjagkjkjashdf MAF safdjsljhafewuhuihewqa"
05-28-2013, 06:25 PM
#17
Senior Member
Join Date: Sep 2008
Location: Connecticut
Posts: 836
How is that a fail....i said get a maf just like u said, and if you read through the forums, and from experience, The MAF might not throw a code on its way going out. And usually when people(noted on the forums and through experience) can't rev past 2500 it points towards the maf. So how is that a fail? :-/
06-03-2013, 10:02 AM
#19
Junior Member
Thread Starter
Join Date: Dec 2008
Location: Belleville, NJ
Posts: 27
So I just threw in a new MAF, and i'm still having the same problem, it will not rev past 2.5.
Edit:
If I turn the car off and back on, it will rev till the redline and drive normally. So I would turn it on, not be able to rev past 2.5k, turn it off and on, and it would work fine.
Edit:
If I turn the car off and back on, it will rev till the redline and drive normally. So I would turn it on, not be able to rev past 2.5k, turn it off and on, and it would work fine.
Last edited by DipreSantana; 06-03-2013 at 12:11 PM.
Thread
Thread Starter
Forum
Replies
Last Post
My Coffee
New Member Introductions
15
06-06-2017 02:01 PM