2000 Maxima - P1130 Swirl Control Solenoid Valve
Thread Starter
Junior Member
Joined: Sep 2019
Posts: 89
From: East Orlando, Florida
2000 Maxima - P1130 Swirl Control Solenoid Valve
I still have the dreaded Check Engine Light (CEL) or more like "Service Engine Soon" Light!
Specific error code is P1130.
The Engine runs like new and doesn't hesitates at all. It takes off like a home sick dove!
I have been looking at various discussion threads and even was able to download what appears to be the Shop manual and on PAGE 453 starts with the detailed description then, subsequent long winded Troubleshooting.
I have several issues with this manual and as an example on Page EC-462 it says to disconnect the wire harness to the Swirl Control Solenoid and check for Voltage but, it doesn't say how much Voltage or in other words what are the pass/fail criteria?
Here is the Shop Manual for a typical 2001 Maxima:
http://boredmder.com/FSMs/Nissan/Maxima/2001/EC.pdf
If anyone is still out there then, appreciate any assistance!
Specific error code is P1130.
The Engine runs like new and doesn't hesitates at all. It takes off like a home sick dove!
I have been looking at various discussion threads and even was able to download what appears to be the Shop manual and on PAGE 453 starts with the detailed description then, subsequent long winded Troubleshooting.
I have several issues with this manual and as an example on Page EC-462 it says to disconnect the wire harness to the Swirl Control Solenoid and check for Voltage but, it doesn't say how much Voltage or in other words what are the pass/fail criteria?
Here is the Shop Manual for a typical 2001 Maxima:
http://boredmder.com/FSMs/Nissan/Maxima/2001/EC.pdf
If anyone is still out there then, appreciate any assistance!
Thread
Thread Starter
Forum
Replies
Last Post
SWIFTMAXAZ
5th Generation Maxima (2000-2003)
40
Feb 8, 2007 06:06 AM