Valve Cover Gasket Replacement - $1000?
#1
Valve Cover Gasket Replacement - $1000?
Hello everyone,
I have what appears to be a valve cover gasket leak on my 2000 Maxima (GXE I believe). I brought it to my mechanic and was quoted $1000 to replace that gasket(s?). I was surprised to see that other local mechanics quote similar.
I've only ever done my brake pads so I'm not familiar with this repair and the labor that goes into it but I watched a video of someone replacing the valve cover gasket on a different car and it looked very quick and simple. I also read a couple comments on this forum where people said it was simple.
So I wanted to know, is maybe the video I watched deceptive and the gasket would be harder to get to and replace on a 2000 Maxima, hence the $1000 price tag? Is this something a beginner could/should do? I would like to do it myself if it's not super hard and I don't need any expensive or obscure tools to do it but I imagine there must the something I'm missing here if it's $1000 for the mechanic to do it.
I have what appears to be a valve cover gasket leak on my 2000 Maxima (GXE I believe). I brought it to my mechanic and was quoted $1000 to replace that gasket(s?). I was surprised to see that other local mechanics quote similar.
I've only ever done my brake pads so I'm not familiar with this repair and the labor that goes into it but I watched a video of someone replacing the valve cover gasket on a different car and it looked very quick and simple. I also read a couple comments on this forum where people said it was simple.
So I wanted to know, is maybe the video I watched deceptive and the gasket would be harder to get to and replace on a 2000 Maxima, hence the $1000 price tag? Is this something a beginner could/should do? I would like to do it myself if it's not super hard and I don't need any expensive or obscure tools to do it but I imagine there must the something I'm missing here if it's $1000 for the mechanic to do it.
#2
Hello everyone,
I have what appears to be a valve cover gasket leak on my 2000 Maxima (GXE I believe). I brought it to my mechanic and was quoted $1000 to replace that gasket(s?). I was surprised to see that other local mechanics quote similar.
I've only ever done my brake pads so I'm not familiar with this repair and the labor that goes into it but I watched a video of someone replacing the valve cover gasket on a different car and it looked very quick and simple. I also read a couple comments on this forum where people said it was simple.
So I wanted to know, is maybe the video I watched deceptive and the gasket would be harder to get to and replace on a 2000 Maxima, hence the $1000 price tag? Is this something a beginner could/should do? I would like to do it myself if it's not super hard and I don't need any expensive or obscure tools to do it but I imagine there must the something I'm missing here if it's $1000 for the mechanic to do it.
I have what appears to be a valve cover gasket leak on my 2000 Maxima (GXE I believe). I brought it to my mechanic and was quoted $1000 to replace that gasket(s?). I was surprised to see that other local mechanics quote similar.
I've only ever done my brake pads so I'm not familiar with this repair and the labor that goes into it but I watched a video of someone replacing the valve cover gasket on a different car and it looked very quick and simple. I also read a couple comments on this forum where people said it was simple.
So I wanted to know, is maybe the video I watched deceptive and the gasket would be harder to get to and replace on a 2000 Maxima, hence the $1000 price tag? Is this something a beginner could/should do? I would like to do it myself if it's not super hard and I don't need any expensive or obscure tools to do it but I imagine there must the something I'm missing here if it's $1000 for the mechanic to do it.
It's a labor intensive task. You need to remove the intake. If you are already paying for that labor, you may as well be efficient with your labor cost and replace the coil packs and spark plugs as part of the job. I wasted more than that trying to rescue my 2002 engine. When you have a 20+ year old vehicle, you either need to live with an ongoing series of breakdowns or WISELY spend the big bucks, get the best parts available, essentially restoring the vehicle. Don't use a mechanic that is willing to waste your money.
I personally ****HATE**** working under the hood. You can do this yourself. I would recommend rehearsing your repair on a Maxima at a you-pull salvage yard. Go purchase some cheap, but hard to get to salvage part that requires removing the valve covers.
#3
Hello everyone,
I have what appears to be a valve cover gasket leak on my 2000 Maxima (GXE I believe). I brought it to my mechanic and was quoted $1000 to replace that gasket(s?). I was surprised to see that other local mechanics quote similar.
I've only ever done my brake pads so I'm not familiar with this repair and the labor that goes into it but I watched a video of someone replacing the valve cover gasket on a different car and it looked very quick and simple. I also read a couple comments on this forum where people said it was simple.
So I wanted to know, is maybe the video I watched deceptive and the gasket would be harder to get to and replace on a 2000 Maxima, hence the $1000 price tag? Is this something a beginner could/should do? I would like to do it myself if it's not super hard and I don't need any expensive or obscure tools to do it but I imagine there must the something I'm missing here if it's $1000 for the mechanic to do it.
I have what appears to be a valve cover gasket leak on my 2000 Maxima (GXE I believe). I brought it to my mechanic and was quoted $1000 to replace that gasket(s?). I was surprised to see that other local mechanics quote similar.
I've only ever done my brake pads so I'm not familiar with this repair and the labor that goes into it but I watched a video of someone replacing the valve cover gasket on a different car and it looked very quick and simple. I also read a couple comments on this forum where people said it was simple.
So I wanted to know, is maybe the video I watched deceptive and the gasket would be harder to get to and replace on a 2000 Maxima, hence the $1000 price tag? Is this something a beginner could/should do? I would like to do it myself if it's not super hard and I don't need any expensive or obscure tools to do it but I imagine there must the something I'm missing here if it's $1000 for the mechanic to do it.
While you are there:
1. Do the valve gaskets.
2. Do any other gaskets (throttle body, etc...)
3. Change your PCV valve (easy to get to when the intake is off)
4. Change any old/brittle vacuum hoses.
5. Change plugs if needed.
6. Change coils if needed.
7. Perform the coolant bypass of the IACV, disconnect the electronic motor mounts (for automatic trans) and change ENG CONT1 fuse to 7.5A - https://www.my4dsc.com/preventing-ec...nissan-maxima/
Note: 5 & 6 really no problem to do in any case. 7 I would do ASAP...ask me how I know.
#6
When sitting down at the "rescue an old Maxima" table, that's just the ante. All told, I will have spent and in some cases wasted 8 times that on just the engine in my 2002. I did a "face palm" for not discovering that low mileage teal 2002 Maxima from Florida listed on this site earlier this year. Short term, his 3.0 engine will be less of a headache than a VQ35DE. He will soon hit the 25 year wall where parts are much harder to get. I hope that he tries my idea of dismantling that part of the engine at a salvage yard for practice.
Last edited by 2002SEMT; 10-21-2022 at 07:34 AM.
#7
1. Do the valve gaskets.
2. Do any other gaskets (throttle body, etc...)
3. Change your PCV valve (easy to get to when the intake is off)
4. Change any old/brittle vacuum hoses.
5. Change plugs if needed.
6. Change coils if needed.
7. Perform the coolant bypass of the IACV, disconnect the electronic motor mounts (for automatic trans) and change ENG CONT1 fuse to 7.5A - https://www.my4dsc.com/preventing-ec...nissan-maxima/
2. Do any other gaskets (throttle body, etc...)
3. Change your PCV valve (easy to get to when the intake is off)
4. Change any old/brittle vacuum hoses.
5. Change plugs if needed.
6. Change coils if needed.
7. Perform the coolant bypass of the IACV, disconnect the electronic motor mounts (for automatic trans) and change ENG CONT1 fuse to 7.5A - https://www.my4dsc.com/preventing-ec...nissan-maxima/
#8
#9
I think it's mostly because of where I live, the labor cost is extremely high. I can drive a few hours out away from this city for cheaper labor costs but that would be quite the journey if it's something I can do myself as a beginner. I do want to learn these things, it's just scary.
#10
I started my DIY journey by doing my own oil change many years ago when I saw some kid at a lub shop making a mess of my car and an oil change was pushing towards $100.
Then I graduated to brake pads because I trusted myself more than some incompetent mechanic who was trying to constantly sell me services that I did not need.
I am the second owner of my 2003 I35 car. It was driven by a grandma and when I bought it in 2006 from the family, it only had 15,000 miles on it. Fast forward today. I still own the car and it has almost 180,000 miles on it.
As the car got older, it needed more complex and costly repairs. But I got braver. With YouTube , it is amazing what you can learn from some very smart people who are kind enough to share their knowledge. Over the last 16 years, I probably spent no more than $1000 paying someone to fix my car.
IMO - my car is getting to the stage, where it is not worth very much any more. So I am not going to spend thousands to keep it going. But I will buy the parts and learn to do it myself. If I totally screw up the car, it is time to get another one anyways.
My latest adventure is a local shop wanted $2500 to fix my AC. I bought the compressor and all the parts for ~$350 from Amazon and did it myself.
My most challenging project was during COVID lockdown when I had to fix the timing chain rattle by opening the timing chain cover. Thank God that we had no where to go because my car was ripped apart for several months in my garage. BTW - I did call around to some local garages to see how much they would charge me to fix the timing chain guides. Well, none of them wanted to touch it because of the age of the car. So I had no choice but to do it myself. At one point, I was lost but the very smart people on this forum got me back on the right track. My car runs great now.
The moral of the story is we all got started by doing simple things to our cars. We either like to tinker with cars and / or save money. I don’t know how old you are but fixing and maintaining cars is a lost skill with today’s generation.
Be brave, keep learning, keep fixing. Knowledge is power. At the bare minimum, even if you end up having to pay someone to do repairs, you know enough to prevent some crooked mechanic from ripping you off. A side benefit is that you will have lots of friends calling you for car advice years from now.
If you do tackle the engine cover gasket, make sure to do it on some weekend when you are not rushed to have it fixed. I remember the rear cover took most of a day when I did it the first time years ago. Enjoy fixing!
Then I graduated to brake pads because I trusted myself more than some incompetent mechanic who was trying to constantly sell me services that I did not need.
I am the second owner of my 2003 I35 car. It was driven by a grandma and when I bought it in 2006 from the family, it only had 15,000 miles on it. Fast forward today. I still own the car and it has almost 180,000 miles on it.
As the car got older, it needed more complex and costly repairs. But I got braver. With YouTube , it is amazing what you can learn from some very smart people who are kind enough to share their knowledge. Over the last 16 years, I probably spent no more than $1000 paying someone to fix my car.
IMO - my car is getting to the stage, where it is not worth very much any more. So I am not going to spend thousands to keep it going. But I will buy the parts and learn to do it myself. If I totally screw up the car, it is time to get another one anyways.
My latest adventure is a local shop wanted $2500 to fix my AC. I bought the compressor and all the parts for ~$350 from Amazon and did it myself.
My most challenging project was during COVID lockdown when I had to fix the timing chain rattle by opening the timing chain cover. Thank God that we had no where to go because my car was ripped apart for several months in my garage. BTW - I did call around to some local garages to see how much they would charge me to fix the timing chain guides. Well, none of them wanted to touch it because of the age of the car. So I had no choice but to do it myself. At one point, I was lost but the very smart people on this forum got me back on the right track. My car runs great now.
The moral of the story is we all got started by doing simple things to our cars. We either like to tinker with cars and / or save money. I don’t know how old you are but fixing and maintaining cars is a lost skill with today’s generation.
Be brave, keep learning, keep fixing. Knowledge is power. At the bare minimum, even if you end up having to pay someone to do repairs, you know enough to prevent some crooked mechanic from ripping you off. A side benefit is that you will have lots of friends calling you for car advice years from now.
If you do tackle the engine cover gasket, make sure to do it on some weekend when you are not rushed to have it fixed. I remember the rear cover took most of a day when I did it the first time years ago. Enjoy fixing!
#11
yeaa +1, having this forum has kept me super informed of what is going on with the car, so when I take it in to a mechanic I typically can just tell them what work I want to be performed, and have a decent idea what the work involves I am requesting them to do. once in a while I have them diagnose/inspect and tell me what they find but usually its the former and I can just have an order of work and no guessing what will be wrong all thanks to maxima.org
#12
The moral of the story is we all got started by doing simple things to our cars. We either like to tinker with cars and / or save money. I don’t know how old you are but fixing and maintaining cars is a lost skill with today’s generation.
Be brave, keep learning, keep fixing. Knowledge is power. At the bare minimum, even if you end up having to pay someone to do repairs, you know enough to prevent some crooked mechanic from ripping you off. A side benefit is that you will have lots of friends calling you for car advice years from now.
Be brave, keep learning, keep fixing. Knowledge is power. At the bare minimum, even if you end up having to pay someone to do repairs, you know enough to prevent some crooked mechanic from ripping you off. A side benefit is that you will have lots of friends calling you for car advice years from now.
#14
#16
I'm putting that off because I don't hear any clicking or anything but I'd like to try it myself if I can find someone to help out in my area! I heard it can be a little difficult without an extra set of hands.
#17
Is your issue the passenger or driver side CV axle? Usually the passenger side is the problem first. I have done the passenger side on a couple of my vehicles. It was not too bad. The trick is to find a method that minimizes the number of parts you have to unbolt. There is no right or wrong way.
#18
Is your issue the passenger or driver side CV axle? Usually the passenger side is the problem first. I have done the passenger side on a couple of my vehicles. It was not too bad. The trick is to find a method that minimizes the number of parts you have to unbolt. There is no right or wrong way.
#19
At those rates I've saved myself hundreds of thousands of dollars.
Replacing a drive shaft was probably the first "big" job I ever did. It's easy with the correct tools. Do you have the tools or want to start investing in them?
Replacing a drive shaft was probably the first "big" job I ever did. It's easy with the correct tools. Do you have the tools or want to start investing in them?
#20
I will invest in tools within reason! I am in an apartment and I only have a parking lot. It isn't patrolled or anything but I still wouldn't do anything crazy given it's not my property and I need to completely wrap up whatever I'm doing before the sun is down.
I did my brake pads on the Grand Am in my parking lot successfully but anything more involved than that, I'm a little nervous.
#21
Now I understand your limitations. You can start by looking at some YouTube videos and learn what is in involved. You can then decide whether it is something that you want to get involved with.
I don’t know whether you need to do the front or the rear Valve cover but the front is much easier than the rear. You will need to remove the manifold to do the rear. That is why it is more complex. When I did the rear the very first time, it took me most of a day. You will also have numerous parts out of your car and in the parking lot. All things to consider. Good luck whatever you decide.
I don’t know whether you need to do the front or the rear Valve cover but the front is much easier than the rear. You will need to remove the manifold to do the rear. That is why it is more complex. When I did the rear the very first time, it took me most of a day. You will also have numerous parts out of your car and in the parking lot. All things to consider. Good luck whatever you decide.
#22
It's just Legos. Take a bunch of stuff apart, and in the process of disassembly, you learn how it all goes back together. Take good video of the engine before and as you go and you'll be fine. maxinout's post #3 is the best practice advice. Just do both covers and his list. His list is spot on and you'll never have to do anything again for as long as you own the car.
Tasks never done before always seem difficult because of the unknown factor. I can have my upper intake manifold and both bank rocker covers off in about 20 minutes.
It would be wise, however, to download the FSM and study the page that illustrates where the liquid sealant must be applied. These rocker covers use both a rubber gasket in conjunction with sealant. Use Ultra Grey.
And if you hit a snag, we're always here.
Tasks never done before always seem difficult because of the unknown factor. I can have my upper intake manifold and both bank rocker covers off in about 20 minutes.
It would be wise, however, to download the FSM and study the page that illustrates where the liquid sealant must be applied. These rocker covers use both a rubber gasket in conjunction with sealant. Use Ultra Grey.
And if you hit a snag, we're always here.
#23
It's just Legos. Take a bunch of stuff apart, and in the process of disassembly, you learn how it all goes back together. Take good video of the engine before and as you go and you'll be fine. maxinout's post #3 is the best practice advice. Just do both covers and his list. His list is spot on and you'll never have to do anything again for as long as you own the car.
Tasks never done before always seem difficult because of the unknown factor. I can have my upper intake manifold and both bank rocker covers off in about 20 minutes.
It would be wise, however, to download the FSM and study the page that illustrates where the liquid sealant must be applied. These rocker covers use both a rubber gasket in conjunction with sealant. Use Ultra Grey.
And if you hit a snag, we're always here.
Tasks never done before always seem difficult because of the unknown factor. I can have my upper intake manifold and both bank rocker covers off in about 20 minutes.
It would be wise, however, to download the FSM and study the page that illustrates where the liquid sealant must be applied. These rocker covers use both a rubber gasket in conjunction with sealant. Use Ultra Grey.
And if you hit a snag, we're always here.
#25
Download "EM - Engine Mechanical"
https://www.my4dsc.com/nissan-info/f...ervice-manual/
Reference page EM-49 for liquid sealant application. Nothing to it.
https://www.my4dsc.com/nissan-info/f...ervice-manual/
Reference page EM-49 for liquid sealant application. Nothing to it.
#27
I was like you 20 years ago when I had my 1959 Chevrolet. With these (comparatively) modern vehicles there are all kinds of electronic damage that one can do. You can set off the airbags and here's all kinds of circuits that you can damage. Be darn careful. Since you won't have experienced anything better, you won't mind pinching your fingers and scraping your hands in all those tight spaces. I would only consider working on my own car because I don't trust mechanics to use only the best parts where price is no object.
If you try to save money on parts, you'll sorely regret it. There's a defective parts crisis going on; it pays to be mindful of that. Try OEM, MAYBE NAPA if OEM isn't available. My experience is that repairing a 20 year old Maxima is a recipe for frustration. RESTORE, don't repair. Fix everything that MIGHT break, not just stuff that's broken.
I prefer to spend my time building my experience in enterprise level computer systems. Trying to do my own work on a modern vehicle is just to tedious and frustrating.
Now days, a 5th Gen Maxima is better than a 1950s vehicle because the supply of restoration parts has dried up for the 1950s cars. What use to be a $20K restoration is now a $75K restoration because special parts fabrications are necessary instead of just walking into a restoration parts shop. I still don't understand why these 5th Gen Maximas aren't worth more money in the marketplace.
Last edited by 2002SEMT; 11-01-2022 at 05:38 AM.
#28
#29
Glad I found this thread. My 01 I30 needs a valve cover replacement. They have it listed as "left" & "right" valve covers on the estimate. Local trusted mechanic quoted me $124 for parts/supplies & $644 for labor. Seems reasonable to me. I've never done anything like this job before so I'm hesitant to do this.
OP - did you end up doing the work yourself?
OP - did you end up doing the work yourself?
#30
Glad I found this thread. My 01 I30 needs a valve cover replacement. They have it listed as "left" & "right" valve covers on the estimate. Local trusted mechanic quoted me $124 for parts/supplies & $644 for labor. Seems reasonable to me. I've never done anything like this job before so I'm hesitant to do this.
OP - did you end up doing the work yourself?
OP - did you end up doing the work yourself?
If you search the 5th gen section of this forum, I believe someone wrote up a guide on the steps to get to and replace the valve cover gaskets.
#31
https://www.nissanhelp.com/diy/maxim...eplacement.php
This is the best guide that I have seen for removing valve covers. It minimizes the number of parts that you have to remove in order to take the rear valve cover off. It was written for replacing spark plugs but you can skip the spark plug steps if you are just replacing the valve cover gasket.
I discovered the guide over 10 years ago and I still use it today as a reminder. For all you new DIY’ers, do not be afraid. Like someone said, it is like Lego. Remove a bunch of parts. It is hard to screw up. Just take lots of pics as you are taking things apart. It will help you when you have to put everything back together. Good luck!
This is the best guide that I have seen for removing valve covers. It minimizes the number of parts that you have to remove in order to take the rear valve cover off. It was written for replacing spark plugs but you can skip the spark plug steps if you are just replacing the valve cover gasket.
I discovered the guide over 10 years ago and I still use it today as a reminder. For all you new DIY’ers, do not be afraid. Like someone said, it is like Lego. Remove a bunch of parts. It is hard to screw up. Just take lots of pics as you are taking things apart. It will help you when you have to put everything back together. Good luck!
#35
https://www.nissanhelp.com/diy/maxim...eplacement.php
This is the best guide that I have seen for removing valve covers. It minimizes the number of parts that you have to remove in order to take the rear valve cover off. It was written for replacing spark plugs but you can skip the spark plug steps if you are just replacing the valve cover gasket.
I discovered the guide over 10 years ago and I still use it today as a reminder. For all you new DIY’ers, do not be afraid. Like someone said, it is like Lego. Remove a bunch of parts. It is hard to screw up. Just take lots of pics as you are taking things apart. It will help you when you have to put everything back together. Good luck!
This is the best guide that I have seen for removing valve covers. It minimizes the number of parts that you have to remove in order to take the rear valve cover off. It was written for replacing spark plugs but you can skip the spark plug steps if you are just replacing the valve cover gasket.
I discovered the guide over 10 years ago and I still use it today as a reminder. For all you new DIY’ers, do not be afraid. Like someone said, it is like Lego. Remove a bunch of parts. It is hard to screw up. Just take lots of pics as you are taking things apart. It will help you when you have to put everything back together. Good luck!
#36
It will help but there are many more things on a 3.0 to remove. You will need to find a how to specifically for a VQ30DE-k. Even the older VQ30DE is way different.
#37
Well that's discouraging. I don't think I've found any videos or guides for this for my engine specifically.
#38
It's a labor intensive task. You need to remove the intake. If you are already paying for that labor, you may as well be efficient with your labor cost and replace the coil packs and spark plugs as part of the job. I wasted more than that trying to rescue my 2002 engine. When you have a 20+ year old vehicle, you either need to live with an ongoing series of breakdowns or WISELY spend the big bucks, get the best parts available, essentially restoring the vehicle. Don't use a mechanic that is willing to waste your money.
I personally ****HATE**** working under the hood. You can do this yourself. I would recommend rehearsing your repair on a Maxima at a you-pull salvage yard. Go purchase some cheap, but hard to get to salvage part that requires removing the valve covers.
I personally ****HATE**** working under the hood. You can do this yourself. I would recommend rehearsing your repair on a Maxima at a you-pull salvage yard. Go purchase some cheap, but hard to get to salvage part that requires removing the valve covers.
I was able to access the rear spark plugs and coils no problem on my 2000 SE with the intake on. I actually waited to put the coils back in after I reinstalled my intake.
Nothing to the valve covers it's not that bad I just made sure i torque mine back down to factory specs and followed the tighting procedure in the manual for intake as well. I took a few pictures so I could remember where the vacuum lines and various wires were routed but ended up not needing them.
Last edited by Oklahoma; 05-17-2023 at 05:33 AM.
#39
I'm glad I learned how to fix my own $h!t, I've saved so much on repairs and upgrades.. the money I save and make will be going towards a paint job later this year. right now I'm focused on finishing the 7th gen swap. 😁
#40