How would a Corvette do against a SC'ed 00-01 Max @ 9 (cooled) psi's?
Originally posted by see5
Kev,
Sorry Kev if your sig is accurate with 283hp you probably will lose.
Most of the older Corvetts are at least 300 hp and the new ones are 350 to 405. They generate huge torque and weigh about the same as our Max. They have positraction and launch like a rocket with lots of tire on rear 275/40/18 stock and top speed of 170+ mph.
Cheers,
Bruce
Kev,
Sorry Kev if your sig is accurate with 283hp you probably will lose.
Most of the older Corvetts are at least 300 hp and the new ones are 350 to 405. They generate huge torque and weigh about the same as our Max. They have positraction and launch like a rocket with lots of tire on rear 275/40/18 stock and top speed of 170+ mph.
Cheers,
Bruce
Originally posted by Y2KevSE
I raced one already.
Basically matched his speed before we had to let off because a Civic couldn't decide to stay in his lane or go into my lane.
A 5 speed swap.
Forgot to mention this: I'm running a 3" SC pulley now and an even smaller one should be at my door steps by the end of today. Yes, I'm breaking into the 2" barrier.
I'm not sure how much hp the 3" pulley (vs. 3.125 at 288 whp), but I should be very close to 300 whp.
I raced one already.
Basically matched his speed before we had to let off because a Civic couldn't decide to stay in his lane or go into my lane.
A 5 speed swap.
Forgot to mention this: I'm running a 3" SC pulley now and an even smaller one should be at my door steps by the end of today. Yes, I'm breaking into the 2" barrier.
I'm not sure how much hp the 3" pulley (vs. 3.125 at 288 whp), but I should be very close to 300 whp.
who ever said bigger was better!
Good luck on building that monster.. I just received my 3.25 pulley and I swapped out the NOS kit for a NX kit(much nicer features IMO)...300+fwhp here we come!
Originally posted by jhans114
2.95" pulley who ever said bigger was better! Good luck on building that monster.. I just received my 3.25 pulley and I swapped out the NOS kit for a NX kit(much nicer features IMO)...300+fwhp here we come!
2.95" pulley
who ever said bigger was better! Good luck on building that monster.. I just received my 3.25 pulley and I swapped out the NOS kit for a NX kit(much nicer features IMO)...300+fwhp here we come!
so many SCed Maxes nowadays i wish i was one of them
Originally posted by jhans114
2.95" pulley who ever said bigger was better! Good luck on building that monster.. I just received my 3.25 pulley and I swapped out the NOS kit for a NX kit(much nicer features IMO)...300+fwhp here we come!
2.95" pulley
who ever said bigger was better! Good luck on building that monster.. I just received my 3.25 pulley and I swapped out the NOS kit for a NX kit(much nicer features IMO)...300+fwhp here we come!
Good luck with the nitrous and be very careful.
Originally posted by see5
I think it would be a good one, Let me know ,we will go for it @ the track.
No street race here>
I think it would be a good one, Let me know ,we will go for it @ the track.
No street race here>
Senior Member
Joined: Apr 2001
Posts: 583
Originally posted by IceY2K1
Not sure if it's a valid comparison since I'm N/A, but I can attest to seeing a 2001 Camaro SS pull like a bat-out-of-hell on me from 115-140+mph.
Similar engine about 30 less hp. It was friggen gone. I respect ANYTHING that can pull away like your standing still at 115mph.
Not sure if it's a valid comparison since I'm N/A, but I can attest to seeing a 2001 Camaro SS pull like a bat-out-of-hell on me from 115-140+mph.
Similar engine about 30 less hp. It was friggen gone. I respect ANYTHING that can pull away like your standing still at 115mph.
Originally posted by BigDogJonx
All the new corvettes have their exhausts exit right under the license plate the one you saw had to be a 99 ZR1 or LT1.
Dixit
All the new corvettes have their exhausts exit right under the license plate the one you saw had to be a 99 ZR1 or LT1.
Dixit
There were no ZR-1s after the 1995 model year.
Thread
Thread Starter
Forum
Replies
Last Post
litch
4th Generation Maxima (1995-1999)
123
Jan 4, 2024 07:01 PM
Maximeltman
4th Generation Maxima (1995-1999)
2
Sep 28, 2015 07:19 PM