FS: 6th gen factory HID conversion
#1
Senior Member
Thread Starter
iTrader: (11)
Join Date: Jun 2006
Location: Cherry Hill, NJ / Hoboken, NJ
Posts: 1,325
FS: 6th gen factory HID conversion
Hi folks,
I have the following parts
Pair OEM Hella "E55" HID projectors
2 Pair OEM Philips 85122+ bulbs
pair OEM Matsu****a D2S ballasts
I can sell the projectors for $100 per pair
I can sell the ballasts for $100 per pair
I can sell the bulbs for $50 per pair
Plus shipping (shouldn't be more than $10 no matter how much you want)
As a discount, if you send me your factory halogen projectors and bulbs, I will take $50 off of your purchase.
The projectors will fit into your headlights plug-and-play. All you need to do is remove like four screws, take the halogen projector out, and put the HID projector in.
The ballasts also fit the headlights. There is a circular indentation on the bottom of the halogen headlights that is just covered. If you cut the plastic out, the ballast will screw directly into the headlight. I am including the ignitor and the pigtail connector, so you just need to splice the two wires and you're set.
This VQPower article has details. The projectors and ballasts I have for sale are the exact ones used in the article.
http://www.vqpower.com/v2/articles.php?article_id=171
In addition, if you're local (jersey, maryland, delaware, philly, nyc), I can install them for you.
Here are some pics. On the projector picture, ignore the ballast and the shroud, I will remove those before sending them
I have the following parts
Pair OEM Hella "E55" HID projectors
2 Pair OEM Philips 85122+ bulbs
pair OEM Matsu****a D2S ballasts
I can sell the projectors for $100 per pair
I can sell the ballasts for $100 per pair
I can sell the bulbs for $50 per pair
Plus shipping (shouldn't be more than $10 no matter how much you want)
As a discount, if you send me your factory halogen projectors and bulbs, I will take $50 off of your purchase.
The projectors will fit into your headlights plug-and-play. All you need to do is remove like four screws, take the halogen projector out, and put the HID projector in.
The ballasts also fit the headlights. There is a circular indentation on the bottom of the halogen headlights that is just covered. If you cut the plastic out, the ballast will screw directly into the headlight. I am including the ignitor and the pigtail connector, so you just need to splice the two wires and you're set.
This VQPower article has details. The projectors and ballasts I have for sale are the exact ones used in the article.
http://www.vqpower.com/v2/articles.php?article_id=171
In addition, if you're local (jersey, maryland, delaware, philly, nyc), I can install them for you.
Here are some pics. On the projector picture, ignore the ballast and the shroud, I will remove those before sending them
Thread
Thread Starter
Forum
Replies
Last Post
The Frye
7th Generation Maxima (2009-2015)
6
09-02-2021 11:03 AM
MR2 T'd
5th Generation Classifieds (2000-2003)
6
07-09-2021 05:06 AM
MaxLife17
8th Generation Maxima (2016-)
43
06-27-2019 01:37 PM