HotShot Race Headers
Thread Starter
Senior Member
Joined: May 2005
Posts: 134
HotShot Race Headers
I was looking up stuff for my girlfriends sti and I was wondering if these guys had anything for the 04 - 05 maxima and they did. I click on header thinking I was going to find nothing but I did. Now they say it fits 02 and up but wanted to post it up here to see what the org thinks first 04 and up Nissan Maxima - Headers Im going to try to get them on the phone now 
Joined: May 2005
Posts: 10,197
From: Displaced New Yorker in Southern, MD
Sorry but I don't think they will fit the 04-05 Max. Their was another thread aout these hotshots and it turned out they were actually for an 02 through 03 5.5Gen Max, not the new 6th Gen.
I will fully except if you prove me wrong.
I will fully except if you prove me wrong.
Thread Starter
Senior Member
Joined: May 2005
Posts: 134
Well that sucks to hear I just got off the phone with these guys and they said it would fit. $ 600.00 beans is alot of money to burn and they don't fit you know but then I can send them back. I see if im getting any money back from school this month if so I could try it. So many bills got to make sure my money is right my dad will kill me if i get kicked out of school. That would kick a$$ if i could get the money and see if they work if I get the money I will let you no 
P.S NismoMax80, I did not know somebody talked about this part from andy's autosport already I no how much you hate
my bad
P.S NismoMax80, I did not know somebody talked about this part from andy's autosport already I no how much you hate
my bad
Thread Starter
Senior Member
Joined: May 2005
Posts: 134
Ok just got off the phone with hotshot performance and they told me dont get it cuase I will have nothing but probs with them. Then he said wait alittle till we have them for the 04 and up so I take it that they are working on them 
P.S NismoMax80 now its really my bad I will understand when you close the post
P.S NismoMax80 now its really my bad I will understand when you close the post
Joined: May 2005
Posts: 10,197
From: Displaced New Yorker in Southern, MD
Just remember, school comes first, with the right education and job, the cost of these mods in the future will seem like peanuts. Trust me, I was a former HS dropout and the road was hard and bumpy. NOT ANYMORE THOUGH...
Thread Starter
Senior Member
Joined: May 2005
Posts: 134
Originally Posted by chernmax
Just remember, school comes first, with the right education and job, the cost of these mods in the future will seem like peanuts. Trust me, I was a former HS dropout and the road was hard and bumpy. NOT ANYMORE THOUGH...
Lol
send us their e-mail, im sure with a blast of interest from the org they'll get teh ball rolling.
I dunno about you guys, but since i joined the org i became a maximanatic/totalfanatic.
I would spring $600 for a set of headers if i knew they gave me 10-15 more ponies.
10hp headers
2hp y-pipe
1hp mandrel bent exaust with Remus muffys
2 hp UDP
1 hp Nismo/Berk/Injen or home made intake.
total of 16Hp extra for a total of 281Hp.
plus cams 10Hp
total of 291hp.
There we go I'm at the rought equivelant of a new Z350..
Oh well a Z is not my max
id pay extra for her.
Peace,
Kam
I dunno about you guys, but since i joined the org i became a maximanatic/totalfanatic.
I would spring $600 for a set of headers if i knew they gave me 10-15 more ponies.
10hp headers
2hp y-pipe
1hp mandrel bent exaust with Remus muffys
2 hp UDP
1 hp Nismo/Berk/Injen or home made intake.
total of 16Hp extra for a total of 281Hp.
plus cams 10Hp
total of 291hp.
There we go I'm at the rought equivelant of a new Z350..
Oh well a Z is not my max
id pay extra for her. Peace,
Kam
Originally Posted by kamilkluczewski
send us their e-mail, im sure with a blast of interest from the org they'll get teh ball rolling.
I dunno about you guys, but since i joined the org i became a maximanatic/totalfanatic.
I would spring $600 for a set of headers if i knew they gave me 10-15 more ponies.
10hp headers
2hp y-pipe
1hp mandrel bent exaust with Remus muffys
2 hp UDP
1 hp Nismo/Berk/Injen or home made intake.
total of 16Hp extra for a total of 281Hp.
plus cams 10Hp
total of 291hp.
There we go I'm at the rought equivelant of a new Z350..
Oh well a Z is not my max id pay extra for her.
Peace,
Kam
I dunno about you guys, but since i joined the org i became a maximanatic/totalfanatic.
I would spring $600 for a set of headers if i knew they gave me 10-15 more ponies.
10hp headers
2hp y-pipe
1hp mandrel bent exaust with Remus muffys
2 hp UDP
1 hp Nismo/Berk/Injen or home made intake.
total of 16Hp extra for a total of 281Hp.
plus cams 10Hp
total of 291hp.
There we go I'm at the rought equivelant of a new Z350..
Oh well a Z is not my max
id pay extra for her. Peace,
Kam
$600 for headers.
$300 for the y-pipe (unless you got it on that GD back in the day for $200)
$$$$ for the exhaust... if you go with Greedy or Cattman you're looking at $600-800 easy. Maybe just a couple of hundred if you go for the piping and no new mufflers.
$200 for the UR UDP
$200 at least for the intake unless you go with home-made.
That's almost $2k for an estimated 16hp. Any way you slice it that's a lot, and I think it shows that the aftermarket for the 6th gen is still hurting. Hopefully we can get a few more choices and that will drive the prices down.
And that's not even talking about the cams... what did somebody say before, $1,200 or something like that for cams? You're looking at $3k for 25hp. When you look at the forced induction choices for other cars, you see $6k for 4-5 times as much power. If you believe SSR you're looking at $3,500 for 100hp jump. That's more like it IMO...
Member
Joined: Jul 2005
Posts: 89
Originally Posted by viguera
Well I think the numbers are conservative but realistic, but when you add it all up, is it really worth it?
$600 for headers.
$300 for the y-pipe (unless you got it on that GD back in the day for $200)
$$$$ for the exhaust... if you go with Greedy or Cattman you're looking at $600-800 easy. Maybe just a couple of hundred if you go for the piping and no new mufflers.
$200 for the UR UDP
$200 at least for the intake unless you go with home-made.
That's almost $2k for an estimated 16hp. Any way you slice it that's a lot, and I think it shows that the aftermarket for the 6th gen is still hurting. Hopefully we can get a few more choices and that will drive the prices down.
And that's not even talking about the cams... what did somebody say before, $1,200 or something like that for cams? You're looking at $3k for 25hp. When you look at the forced induction choices for other cars, you see $6k for 4-5 times as much power. If you believe SSR you're looking at $3,500 for 100hp jump. That's more like it IMO...
$600 for headers.
$300 for the y-pipe (unless you got it on that GD back in the day for $200)
$$$$ for the exhaust... if you go with Greedy or Cattman you're looking at $600-800 easy. Maybe just a couple of hundred if you go for the piping and no new mufflers.
$200 for the UR UDP
$200 at least for the intake unless you go with home-made.
That's almost $2k for an estimated 16hp. Any way you slice it that's a lot, and I think it shows that the aftermarket for the 6th gen is still hurting. Hopefully we can get a few more choices and that will drive the prices down.
And that's not even talking about the cams... what did somebody say before, $1,200 or something like that for cams? You're looking at $3k for 25hp. When you look at the forced induction choices for other cars, you see $6k for 4-5 times as much power. If you believe SSR you're looking at $3,500 for 100hp jump. That's more like it IMO...
I guess if you wanted to buy a y pipe and a set of headers then go ahead but it would be completely pointless. Maybe learn something about the Engine components you are speaking of and you'll know what I mean.
Thread
Thread Starter
Forum
Replies
Last Post
KabirUTA13
5th Generation Classifieds (2000-2003)
19
Oct 17, 2015 02:15 AM