Brake Pads
#1
Brake Pads
what are good brake pads to get, i was told by my dealership that my brake pads were half way worn down so they gave me two options either put new brake pads now, only 17,000 miles on the car, or machine the rotars ( not sure what that means )... anyway what are the best but reasonable priced brake pads to buy for a 2005 maxima?
#2
http://forums.maxima.org/showthread....slotted+rotors
plenty of threads on brakes and dealer fixes.
group deal is over but Jason is th Org Brakes guy:
http://forums.maxima.org/showthread....04#post3878504
plenty of threads on brakes and dealer fixes.
group deal is over but Jason is th Org Brakes guy:
http://forums.maxima.org/showthread....04#post3878504
#5
its simple... two bolts take the caliper off, compress them and put the pads back on..
note: the front calipers compress, the rear turn like a screw back in..
do it yourself its easy.. the dealer will rape you for this same job..
note: the front calipers compress, the rear turn like a screw back in..
do it yourself its easy.. the dealer will rape you for this same job..
#6
I got nissan pads.....for the fact that my original pads are at about 40k and still have life left...i could squeeze more out of em, but dont want to screw up the rotors...i did hav the rotors resurfaced with about 25k though... got the pads online for $82 for both front and rear
#9
Originally Posted by vince23ho
I need some Pads as well. Any Group Buys going on?
![Scratch](https://maxima.org/forums/images/smilies/scratchhead.gif)
#11
Originally Posted by 04BlackMaxx
36,000 mi here and the car breaks like new. I never brake hard and drive highway alot.
#12
Originally Posted by SilverMax_04
...Remember the old saying: "Step on your brakes hard and you throw the steering wheel away."
![chuckle](https://maxima.org/forums/images/smilies/chuckle.gif)
Some of us AT drivers either forget or too lazy to downshift instead of braking sometimes, but brake pads/rotors are cheaper than a new tranny. On my 5th gen, the rear pads worn about twice as fast as the front (materials, reduce weight shifting/dipping?). Has anyone noticed that on 6th gen?
#13
Originally Posted by RHMax
That saying was before ABS.
Some of us AT drivers either forget or too lazy to downshift instead of braking sometimes, but brake pads/rotors are cheaper than a new tranny.
![chuckle](https://maxima.org/forums/images/smilies/chuckle.gif)
Some of us AT drivers either forget or too lazy to downshift instead of braking sometimes, but brake pads/rotors are cheaper than a new tranny.
I'd still rather not be braking when I'm turning, even with ABS.
#14
very surprising with your 5th gen wearing more in the rear. My firend changed his 03 pads and rotors for the first time. He said how impressed he was that all four wore evenly, crediting our even brake distrubution.
Here's what I've been thinking about downhill braking: yes brakes are cheaper than the tranny. I still auto downshift to slow down when I think the brakes can use the help (sudden stops) or when following someone going way too slow on an extended decline.
For anyone that thinks doing this is really bad, well the Max will do it on it's own. If you're going downhill fast and apply the brakes, watch the RPM climb due to auto-engine braking (not just normal downshifting).
I feel the manumatic was designed to drive like stick (it has the rev limiter to prevent any damage) and should be used to slow down if you like.
Now, how about when taking a decline to a stop or even a long one, putting it into Nuetral to save gas and let gravity propel you? Then use the brakes to slow/stop. Now the engine is at idle and the brakes don't have to fight the engine moving you forward.
Here's what I've been thinking about downhill braking: yes brakes are cheaper than the tranny. I still auto downshift to slow down when I think the brakes can use the help (sudden stops) or when following someone going way too slow on an extended decline.
For anyone that thinks doing this is really bad, well the Max will do it on it's own. If you're going downhill fast and apply the brakes, watch the RPM climb due to auto-engine braking (not just normal downshifting).
I feel the manumatic was designed to drive like stick (it has the rev limiter to prevent any damage) and should be used to slow down if you like.
Now, how about when taking a decline to a stop or even a long one, putting it into Nuetral to save gas and let gravity propel you? Then use the brakes to slow/stop. Now the engine is at idle and the brakes don't have to fight the engine moving you forward.
#15
Originally Posted by NismoMax80
Now, how about when taking a decline to a stop or even a long one, putting it into Nuetral to save gas and let gravity propel you? Then use the brakes to slow/stop. Now the engine is at idle and the brakes don't have to fight the engine moving you forward.
I actually do this in my manual. At the bottom of the long hill to my house, the grade levels off and so I shift into neutral and coast to the stop sign. Saves gas and engine wear. Manual trannie control is the only way to go.
#17
Originally Posted by NismoMax80
very surprising with your 5th gen wearing more in the rear. My firend changed his 03 pads and rotors for the first time. He said how impressed he was that all four wore evenly, crediting our even brake distrubution...
#20
Originally Posted by Maxi B
I have a 2004 SL with 25K miles. When I brake the car pulses as if the rotors are warped. Has anyone else had this issue?
#22
Maxi B, I've started to notice the same thing, and I'm almost to 30k miles... just during normal braking the car vibrates a little. I've already ordered a set of new rotors off Ebay and Axxis Ultimate pads, and I'm going to be painting the calipers at the same time I replace those... Should be looking pretty sweet in a week or two!
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
#23
Aftermarket rotors warped !!
Chrisaust, I'm giving you some headups. I installed 4 new cross-drilled/slotted rotors and Ultimate pads about a month ago. The braking is good. There're lots of dust, it takes only a day to cover the rims after washed. When you wash your rims, you can see a "ton" of dirt. But I can live with all that to look cool and sure stopping.
But I just got back from a 1400mile trip to Lake Tahoe. I think the front rotors got warped when I got there, after some serious downhills. Now my car shakes like crazy doing stops. I just ordered new pads @tirerack.com, and will have the stock rotors back in this weekend. I'll keep the rear in-place for now. I will see if C1 Concepts will take them back.
But I just got back from a 1400mile trip to Lake Tahoe. I think the front rotors got warped when I got there, after some serious downhills. Now my car shakes like crazy doing stops. I just ordered new pads @tirerack.com, and will have the stock rotors back in this weekend. I'll keep the rear in-place for now. I will see if C1 Concepts will take them back.
#24
I really dont get why Nissan, always has, and has had problems with brakes. I have owned, a 91, 95, 2002, and 2004... all of them the only issue were the brakes. Dont they have some brains behind the operation to maybe take some ideas from Honda, who has great brakes? Dont get me wrong... love the nissan name, and look, but god, these brakes are always given me problems.
#25
Guest
Posts: n/a
Originally Posted by chrisaust
Maxi B, I've started to notice the same thing, and I'm almost to 30k miles... just during normal braking the car vibrates a little. I've already ordered a set of new rotors off Ebay and Axxis Ultimate pads, and I'm going to be painting the calipers at the same time I replace those... Should be looking pretty sweet in a week or two! ![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
I have crossdrilled/slotted rotors with those pads and the braking is great.
Note: When u first install the brakes run them hard, because u are using a ceramic pad and need to put a film on the rotors. If u run them real easy durning break in, then u'll squeel till ur change ur pads
#27
MaxFan, I learned a long time ago from my dad that on long downhill stretches you downshift to 3rd or 2nd gear (in an automatic) and save your brakes. But my stock ones have already been tested a couple times on the Max, even having to engage the ABS, and they seemed to work great, so I'll be very happy to have these new ones in there.
By the way, the dust I dont think will bother me, seems hard to believe it'll be worse than the stock ones... At least I'll get a chance to clean out the inside half of my rims when I get the tires off... Anyone use anything stronger than just regular wheel cleaner when you had the tires off to get rid of the dust on the rims?
By the way, the dust I dont think will bother me, seems hard to believe it'll be worse than the stock ones... At least I'll get a chance to clean out the inside half of my rims when I get the tires off... Anyone use anything stronger than just regular wheel cleaner when you had the tires off to get rid of the dust on the rims?
#28
Going downhill in 2nd or 3rd gear ? What the RPM would be going @80-90MPH ? I can reach triple-digit on some slopes. I abandoned the manual shifting after a short time. Going down twisty single-lane mountain roads, manual-shift may help here.
I make multiple trips per year. My '97Max's brakes were good. My '04Max's stock brakes lasted 7 trips before I felt some small vibrations. That was why I tried the aftermarket which I can say lasted 1 trip and 2000miles. The vibrations now is just crazy. I can't wait to have the stock rotors back tomorrow, with new ceramic pads (ultra lowdust this time).
I make multiple trips per year. My '97Max's brakes were good. My '04Max's stock brakes lasted 7 trips before I felt some small vibrations. That was why I tried the aftermarket which I can say lasted 1 trip and 2000miles. The vibrations now is just crazy. I can't wait to have the stock rotors back tomorrow, with new ceramic pads (ultra lowdust this time).
#29
Originally Posted by Dblock905
Dont they have some brains behind the operation to maybe take some ideas from Honda, who has great brakes?
wasn't easy on the brakes and they held up really good. Since the day i bought my 04 max, I was really careful with the brakes but they're warped already.
well...max got better engine tho. TO ME, engine's more important than the brakes, and that's why i love my max.
#30
Hey, if I'm going downhill at 85, I'm probably not worried too much about braking as, you well know being in Irvine, that must mean its 3am, because that's basically the ONLY time you could ever get up over 60 on a freeway around here. I'm talking when there's traffic, you're going maybe 55 or so down the hill on the 405 to the 101 interchange, or when there's REALLY traffic, like anytime of the day going the other way down the 405 to sunset, and you're at 20.
#31
I just got the stock rotors back with new ceramic pads. Smoooooth, not even a sound during braking. Love my car again. It still bites a bit better than stock pads. Chrisaust, you must be talking about LA county. I'm in south Orange and commuting against traffic, so 80-90MPH during "rush" hours is an usual thing. I love going over the Grapevine. Wide-open lanes with looong stretches of up-and-down-hills. But I hate it when blasting 80-90MPH and some clunky SUVs just keep hanging out the the "fast" lanes. Don't people understand "slower traffic keep right" ? This is heavy on the brakes. Some Californian drivers need to go back to school for some manners. I don't want to jig-jag passing on the right. But around here, that maybe what people expect others to do.
#32
Originally Posted by MaxFan
Chrisaust, I'm giving you some headups. I installed 4 new cross-drilled/slotted rotors and Ultimate pads about a month ago. The braking is good. There're lots of dust, it takes only a day to cover the rims after washed. When you wash your rims, you can see a "ton" of dirt. But I can live with all that to look cool and sure stopping.
But I just got back from a 1400mile trip to Lake Tahoe. I think the front rotors got warped when I got there, after some serious downhills. Now my car shakes like crazy doing stops. I just ordered new pads @tirerack.com, and will have the stock rotors back in this weekend. I'll keep the rear in-place for now. I will see if C1 Concepts will take them back.
But I just got back from a 1400mile trip to Lake Tahoe. I think the front rotors got warped when I got there, after some serious downhills. Now my car shakes like crazy doing stops. I just ordered new pads @tirerack.com, and will have the stock rotors back in this weekend. I'll keep the rear in-place for now. I will see if C1 Concepts will take them back.
#33
Alright guys since the automax GD is over I'm on the search for rotors and pads. I found this deal on EBAY, I was wondering what you guys think. I talked to him and he said he can get me Axis pads to go with them for that price of $219. Does this look shady to you guys?
http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW
There's also this deal:
http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW
I'm not too brake savvy so any help would be appreciated!!!
http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW
There's also this deal:
http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW
I'm not too brake savvy so any help would be appreciated!!!
#34
Originally Posted by jsmithsole
Alright guys since the automax GD is over I'm on the search for rotors and pads. I found this deal on EBAY, I was wondering what you guys think. I talked to him and he said he can get me Axis pads to go with them for that price of $219. Does this look shady to you guys?
http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW
There's also this deal:
http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW
I'm not too brake savvy so any help would be appreciated!!!
http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW
There's also this deal:
http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW
I'm not too brake savvy so any help would be appreciated!!!
#35
So you're saying the one's you got from R1 didn't last? And when you say "old" set up are you talking about stock or with the R1's?
Sorry but you confused me...
I e-mailed Brembo to see if there is any word on their rotors for our cars...we'll see.
Thanks for the advice.
J
Sorry but you confused me...
I e-mailed Brembo to see if there is any word on their rotors for our cars...we'll see.
Thanks for the advice.
J
#36
Originally Posted by Tek-Niq
its simple... two bolts take the caliper off, compress them and put the pads back on..
note: the front calipers compress, the rear turn like a screw back in..
do it yourself its easy.. the dealer will rape you for this same job..
note: the front calipers compress, the rear turn like a screw back in..
do it yourself its easy.. the dealer will rape you for this same job..
#37
jsmith, I ordered last week new rotors and pads from ebay, "rotorpros" anyways, he's shipping them out to me today (which means i'll get them tomorrow) and I hopefully will be installing this weekend and painting the calipers at the same time. This guy has been VERY helpful and would have shipped them out last week but his supplier had a death in the family, but he's been extremely nice and courteous. I paid $250 including free shipping, and an extra $80 for the Axxis Metal Master pads for all 4 wheels. Will let you know how they work out.
#38
OEM brake pad
Just realized that it's not the bigger wheels that are causing poor
braking. At the beginning of traffic jam, braking is fine. It is when
the brakes start heating up that causes the non linear response.
I had to press hard at the last moment. I remembered that on
my 4th gen, I'd changed to Bendix IQ and the fading went away.
The OEM pads tend to fade when hot so I will need to change
it out.
braking. At the beginning of traffic jam, braking is fine. It is when
the brakes start heating up that causes the non linear response.
I had to press hard at the last moment. I remembered that on
my 4th gen, I'd changed to Bendix IQ and the fading went away.
The OEM pads tend to fade when hot so I will need to change
it out.
#39
brake dust(?)
Just had my SL serviced and the dealership mentioned something about cleaning the calipers because the brake dust could eventually leave the calipers misaligned. I don't know a lot about brakes, but this didn't make sense to me (at $70/axle). Does anyone have any insight to impart regarding this matter?
Thanks.
Thanks.