INCORRECT INFO>>>>>>SE-R 6sp pedals install guide
11-17-2005, 10:52 AM
#43
I need to learn to google before I ask dumb questions. Sorry. Here is the link for pics of the G35 pedals.
http://infinitipa.zoovy.com/product/ALUMPEDAT
http://infinitipa.zoovy.com/product/ALUMPEDAT
11-17-2005, 04:21 PM
#44
The "Other" project
Join Date: Jun 2005
Posts: 312
I just picked mine up tonight and looking at the G35 pedals, they appear to be the same. the Clutch and Brake are exactly the same as the 350Z so I would probably say they are on the G too......about as close as I will get to a G35 for a little bit 
11-18-2005, 12:01 PM
#47
Maxima of the Month Winner
Join Date: Jan 2004
Posts: 267
Originally Posted by DeusExMaxima
How are the G pedals different?
11-18-2005, 06:41 PM
#49
The "Other" project
Join Date: Jun 2005
Posts: 312
Just an up, if the G pedals are the same as the Z the gas pedal probably won't work. My parts guy ordered both sets for me(the Altima and the Z). The brake and Clutch are the same but the gas is totally different, he was thinking it clipped on but it attaches to the throttle control differently, it looks alot cooler but it isn't the same.
11-18-2005, 08:52 PM
#50
Maxima of the Month Winner
Join Date: Jan 2004
Posts: 267
Originally Posted by DeusExMaxima
Who did u order from?
http://infinitipa.zoovy.com/product/ALUMPEDAT.The link that Deus posted.
I know the gas pedal is different than the Altimas, it's just a cover, not the whole pedal assembly. But I figure, for the price, I can make it work. They shipped the pedals for free. I agreed to try em out and get back to them with any fitment issues.
11-19-2005, 04:11 PM
#52
The "Other" project
Join Date: Jun 2005
Posts: 312
Got all the pedals on today, except for the dead pedal....man it looks so much better!!!!! Wish someone would have told me about the Sunroof re-learn procedure though.....LOL 
11-19-2005, 04:19 PM
#53
:(
Originally Posted by daves04smoke
Got all the pedals on today, except for the dead pedal....man it looks so much better!!!!! Wish someone would have told me about the Sunroof re-learn procedure though.....LOL
sunroof re-learn??? WTF is that?
Kam
11-19-2005, 04:55 PM
#55
The "Other" project
Join Date: Jun 2005
Posts: 312
I was told, when the battery is replaced or disconnected the sunroof loses it memeory of where it is........leave it to nissan..... mine would only tilt up or start to open and that was it. The service manager had me tilt the roof open, hold the button for 20 seconds, then shut off the key and turn it back on so the sunroof would work again......it is about the most stupid thing that I have ever heard of, but my roof works again 
11-19-2005, 07:00 PM
#56
Nations 1st 6th Gen Turbo
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Originally Posted by daves04smoke
I was told, when the battery is replaced or disconnected the sunroof loses it memeory of where it is........leave it to nissan..... mine would only tilt up or start to open and that was it. The service manager had me tilt the roof open, hold the button for 20 seconds, then shut off the key and turn it back on so the sunroof would work again......it is about the most stupid thing that I have ever heard of, but my roof works again
11-20-2005, 04:32 AM
#57
Originally Posted by daves04smoke
I was told, when the battery is replaced or disconnected the sunroof loses it memeory of where it is........leave it to nissan..... mine would only tilt up or start to open and that was it. The service manager had me tilt the roof open, hold the button for 20 seconds, then shut off the key and turn it back on so the sunroof would work again......it is about the most stupid thing that I have ever heard of, but my roof works again
11-20-2005, 04:34 AM
#58
Originally Posted by daves04smoke
Got all the pedals on today, except for the dead pedal....man it looks so much better!!!!! Wish someone would have told me about the Sunroof re-learn procedure though.....LOL
Warren
11-21-2005, 02:16 PM
#59
Pics!
NO PICS!! Went to the dealership to get alignment after the loweing and the ****** crashed my FUKIN CAR!!!!!!!!!!!!!!!!!!!!!!!! FAKK!!!!!!!!!!!!
_@*#@(*#)(!@*)(*@!$)*!@)($*(@!*$)@!
)(@!*)#!(*#)@!*#)(@!*#)*#@)(*@!
_@*#@(*#)(!@*)(*@!$)*!@)($*(@!*$)@!
)(@!*)#!(*#)@!*#)(@!*#)*#@)(*@!
11-21-2005, 02:25 PM
#60
[QUOTE=kamilkluczewski]NO PICS!! Went to the dealership to get alignment after the loweing and the ****** crashed my FUKIN CAR!!!!!!!!!!!!!!!!!!!!!!!! FAKK!!!!!!!!!!!!
WTF how bad is the car?
WTF how bad is the car?
11-21-2005, 03:14 PM
#61
Nations 1st 6th Gen Turbo
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Originally Posted by kamilkluczewski
NO PICS!! Went to the dealership to get alignment after the loweing and the ****** crashed my FUKIN CAR!!!!!!!!!!!!!!!!!!!!!!!! FAKK!!!!!!!!!!!!
_@*#@(*#)(!@*)(*@!$)*!@)($*(@!*$)@!
)(@!*)#!(*#)@!*#)(@!*#)*#@)(*@!
_@*#@(*#)(!@*)(*@!$)*!@)($*(@!*$)@!
)(@!*)#!(*#)@!*#)(@!*#)*#@)(*@!
Sorry about it overall, I hope you get and give them everything they deserve. Fulkers...
11-22-2005, 06:09 AM
#64
damnation
front bumper got fukkd.
They gonna replace it this morning, along with all the other things like oil change, allignment, and door ticking sounds.
I hope they dont try to
me cause ill go ballistic.
Another dealership another problem.
Kam
They gonna replace it this morning, along with all the other things like oil change, allignment, and door ticking sounds.
I hope they dont try to
me cause ill go ballistic.Another dealership another problem.
Kam
11-23-2005, 08:53 AM
#66
Originally Posted by chernmax
After all that work you just had done, I'd be looking to pop someone, as a minimum
Sorry about it overall, I hope you get and give them everything they deserve. Fulkers...
Sorry about it overall, I hope you get and give them everything they deserve. Fulkers...
getting my sniper scope ready and waiting for the right wind
Kam
11-27-2005, 11:36 PM
#67
Foooook
So I got my car back, well it still looks like crap. They did a poor *** job of paiting it and you can see where all the creases are in the bumper. So its going back tommorow and I hope its fixed right OR ILL GO FUKIN POSTAL!!! WW3 on the brink here.
But here are some additions.
Replaced shift boots by redlinegoods.com with better elastic ones instead of veclro. Also better fitting e-brake boot.
http://www.watsonsglen.com/Kam/Maxima/SBRepair/
Put on winter wheels, installed Injen intake, and more pics of SE-R pedals.
http://www.watsonsglen.com/Kam/Maxima/pedals/
Sorry still waiting for invoice so i can check part numbers for you guys.
Kam
But here are some additions.
Replaced shift boots by redlinegoods.com with better elastic ones instead of veclro. Also better fitting e-brake boot.
http://www.watsonsglen.com/Kam/Maxima/SBRepair/
Put on winter wheels, installed Injen intake, and more pics of SE-R pedals.
http://www.watsonsglen.com/Kam/Maxima/pedals/
Sorry still waiting for invoice so i can check part numbers for you guys.
Kam
11-28-2005, 11:28 AM
#71
Member
Join Date: Sep 2005
Location: Atlanta,GA
Posts: 58
You should pick up that quarter and go vaccum your dirty azz floor so the pedals can shine.
11-29-2005, 01:28 PM
#72
uhm
Originally Posted by Peabo5000
You should pick up that quarter and go vaccum your dirty azz floor so the pedals can shine.
Kam
12-15-2005, 08:38 AM
#75
:(
Yes shes getting re-painted again, this time theyr taking off the entire bumper and gonna re-do it properly.
I have no luck with this car what so ever.
I saw another thread about pedals too, so i thought i would bump this up for ya fellas.
Kam
I have no luck with this car what so ever.
I saw another thread about pedals too, so i thought i would bump this up for ya fellas.
Kam
01-30-2006, 04:36 PM
#77
Originally Posted by 05MAXSE
I had the SE-R automatic kit installed on my car in February. Somewhat expensive but it sure does look nice.
02-08-2006, 10:50 AM
#78
There are a couple of things to know about the pedal kit. First, the foot rest has to be modified. The plastic backing has clips on it to slide into holes in the ALti SE-R, which the Maxima does NOT have. It took me 1 minute to take a saw and slice of the clips and bumps.
Here are before and after pics:
Here are before and after pics of the footrest install:
I used 4 black drywall screws and it seems to hold it nicely. If they loosen up, Ill put in longer ones.
Here are before and after pics:
Here are before and after pics of the footrest install:
I used 4 black drywall screws and it seems to hold it nicely. If they loosen up, Ill put in longer ones.
