Anyone want to guess what my next mod is????
07-27-2006, 10:18 AM
#41
Nations 1st 6th Gen Turbo
Thread Starter
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Originally Posted by xorbitman
Man that if you can watch that video without a tear in your eye....
I come from a family with a long military lineage. My grandfather was a well decorated military man....
I did my basic training/service to fullfil the requirement and family "tradition".
Respecting!
I like your gun. My personal fav is the sniper rifle...lol! I think the way things are going up here in Canada, we will eventually go the same route as our cousins in the USA. There have been a number of home invasions up here in the west end of Montreal mostly by the same person or description of that person. They were done in the early morning and were mostly non-violent. Except that the invader is now getting more cocky and pistol whipped a seventy year old man a couple of weeks ago. Last week he shot and killed a 60+ year old man in front of his son and wife. This guy is getting dangerous and is now a killer and an invader. They are trying to find him but he keeps turning up in different neighborhoods at different times. I would like to see him get caught. There are almost no households in Canada with guns. Many Canadians like hunting and fishing and most of the firearms in Canada are hunting rifles. That is why this guy is so confident. If he had to worry about the next house that he invades having an owner with a gun, I think he would think twice about invading homes. He is a serial home invader with now several home invasions to his credit. Some only blocks away from my home! The problem is that this has created some copy cats to try it too.
I come from a family with a long military lineage. My grandfather was a well decorated military man....
I did my basic training/service to fullfil the requirement and family "tradition".
Respecting!
I like your gun. My personal fav is the sniper rifle...lol! I think the way things are going up here in Canada, we will eventually go the same route as our cousins in the USA. There have been a number of home invasions up here in the west end of Montreal mostly by the same person or description of that person. They were done in the early morning and were mostly non-violent. Except that the invader is now getting more cocky and pistol whipped a seventy year old man a couple of weeks ago. Last week he shot and killed a 60+ year old man in front of his son and wife. This guy is getting dangerous and is now a killer and an invader. They are trying to find him but he keeps turning up in different neighborhoods at different times. I would like to see him get caught. There are almost no households in Canada with guns. Many Canadians like hunting and fishing and most of the firearms in Canada are hunting rifles. That is why this guy is so confident. If he had to worry about the next house that he invades having an owner with a gun, I think he would think twice about invading homes. He is a serial home invader with now several home invasions to his credit. Some only blocks away from my home! The problem is that this has created some copy cats to try it too.
07-27-2006, 10:36 AM
#42
Great work. Must have took a TON of time. When I polished my Z calipers, I used a flap wheel to great reduce the sanding time.
But the gun stuff has to go guys. Edit your posts to remove the pics please. Thanks
But the gun stuff has to go guys. Edit your posts to remove the pics please. Thanks
07-27-2006, 10:54 AM
#43
Nations 1st 6th Gen Turbo
Thread Starter
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Originally Posted by Jeff92se
Great work. Must have took a TON of time. When I polished my Z calipers, I used a flap wheel to great reduce the sanding time.
But the gun stuff has to go guys. Edit your posts to remove the pics please. Thanks
But the gun stuff has to go guys. Edit your posts to remove the pics please. Thanks
07-27-2006, 12:35 PM
#46
Hey Jeff92SE, how you do'in? How's the ride? Long time no speak!
Actually I had talked about this spacer in the intake plenum a while ago. So I guess I was right. I had said that it was a good bank for the buck. The problem with that type of mod is that you have to reprogram the stock computer to change the timing in order to take full advantage of it.
Actually I had talked about this spacer in the intake plenum a while ago. So I guess I was right. I had said that it was a good bank for the buck. The problem with that type of mod is that you have to reprogram the stock computer to change the timing in order to take full advantage of it.
07-27-2006, 01:56 PM
#47
Nations 1st 6th Gen Turbo
Thread Starter
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Originally Posted by vsamoylov
looks nice and shiny but should have went with a 350z im. then you would have been the first one to have one on a 6th gen
07-27-2006, 01:59 PM
#48
Nations 1st 6th Gen Turbo
Thread Starter
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Originally Posted by gtr_rider
Looks good man, when are you taking the trip down with Warren to FL.. ?
.............
07-27-2006, 04:42 PM
#51
Originally Posted by chernmax
WOOT!!! Based on your badges, you where aircrew???
Air Assualt Badge and Air Crewmember Badge
EXCELLENT!!!
Since I was Navy, watch this Video, as a military member (past, present) you will appreciate it more than most (worth all 11 minutes)...
http://video.google.com/videoplay?do...38612433437293
Later bro, respecting...
Air Assualt Badge and Air Crewmember Badge
EXCELLENT!!!
Since I was Navy, watch this Video, as a military member (past, present) you will appreciate it more than most (worth all 11 minutes)...
http://video.google.com/videoplay?do...38612433437293
Later bro, respecting...
07-27-2006, 10:03 PM
#53
Nations 1st 6th Gen Turbo
Thread Starter
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Update.
OK today it took me about 2 hours in 92+ heat to remove my old manifold in my garage using hand tools and learning at the same time. Anyway this is my current progress...
After 5 hours of non stop polishing...
Tomorrow I will install when I get off of work. Damn it's late!!!
After 5 hours of non stop polishing...
Tomorrow I will install when I get off of work. Damn it's late!!!
07-27-2006, 10:15 PM
#56
Nations 1st 6th Gen Turbo
Thread Starter
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Originally Posted by Glude
actually it will fit, u just have to do some modifying to the manifold.
07-28-2006, 06:04 AM
#60
Nations 1st 6th Gen Turbo
Thread Starter
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Originally Posted by NmexMAX
Christ.... Put a towel or a rag in those ports or something to protect them 
A34 has EGR... Can anyone tell the difference.
A34 has EGR... Can anyone tell the difference.
Don't worry I did right after I took the shot. I take lots of pic's to document my work, the picture depicted is right after I lifted the manifold off...
07-28-2006, 10:19 AM
#61
Originally Posted by NmexMAX
Christ.... Put a towel or a rag in those ports or something to protect them
A34 has EGR... Can anyone tell the difference.
A34 has EGR... Can anyone tell the difference.
07-28-2006, 11:03 AM
#62
Nations 1st 6th Gen Turbo
Thread Starter
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Originally Posted by Glude
weird, ive never noticed that. Chern, u interested in selling the old manifold?
07-28-2006, 11:07 AM
#63
Nations 1st 6th Gen Turbo
Thread Starter
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Originally Posted by NmexMAX
Christ.... Put a towel or a rag in those ports or something to protect them
A34 has EGR... Can anyone tell the difference.
A34 has EGR... Can anyone tell the difference.
07-28-2006, 11:36 AM
#64
Originally Posted by chernmax
Sorry, the manifold I removed is being sent to Ramberg as a replacement for sending his to me. PM Ramberg and ask, if he agrees, you send him the cash and I'll mail the manifold to you instead. But only if he tells me too, you understand business is business...
Thread
Thread Starter
Forum
Replies
Last Post
jmlee44
4th Generation Maxima (1995-1999)
8
10-02-2022 02:13 PM
My Coffee
New Member Introductions
15
06-06-2017 02:01 PM
Kyle Lee Cleveland
6th Generation Maxima (2004-2008)
1
09-28-2015 09:01 PM