Racingline Strut Tower Brace pre-order info (part 2)
#41
Nations 1st 6th Gen Turbo
![](https://maxima.org/forums/images/Maxima_OTM.png)
![](https://maxima.org/forums/images/smilies/support.gif)
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Originally Posted by Ritz
do you have a manual or auto?
I was just thinking about how in most auto's I've driven, how when you put it in reverse, it shakes the whole car when it goes into gear... does that have anything to do with it? I know in my 6spd it doesn't do that, so I wonder if that's part of the reason...
why does reverse have the potential to hit the STB?
I was just thinking about how in most auto's I've driven, how when you put it in reverse, it shakes the whole car when it goes into gear... does that have anything to do with it? I know in my 6spd it doesn't do that, so I wonder if that's part of the reason...
why does reverse have the potential to hit the STB?
![](http://i16.photobucket.com/albums/b31/chernmax/Funny%20pictures/wtfcat.jpg)
Wow I back out my driveway everyday and she moves just as smooth in reverse as she does in forward. I do believe is someones engine is vibrating excessively, they may want to consider racingline MMI so stiffen her up (I did but I only installed the MMI's about 2 months ago). And with the mods I have, especially the headers my engine tends to rumble more but still never had a rubbing issue and I'm almost going on 3 years since I purchased my Stillen FUSB. I did however have the Stillen brace custom polished.
![Woot 2](https://maxima.org/forums/images/smilies/woot2.gif)
Older picture before I did the manifold...
![](http://i16.photobucket.com/albums/b31/chernmax/RedLineMaxBQOpening6-11-2006005.jpg)
#44
Originally Posted by taz
I am very sorry for the delays, some where necessary and some were out of my control, but at the same time we are trying to produce a high quality item here, not an ebay $25 part
I hope that most of you are ok with everything but if some want to back out I understand, it has taken a fair bit longer than I had originally said
Joe
I hope that most of you are ok with everything but if some want to back out I understand, it has taken a fair bit longer than I had originally said
Joe
I just finished OPC and now I'm back to CoBick for 6 more weeks. I get sworn in on May 10th... you coming?
Kamski
#53
I swore this was posted some where else but I can't find it.
cut/ paste from nissanclub from 4/18/07
as posted on .org, the new sample received was welded wrong again!!!!! so I had to cut the welds and weld it. I sent it back and it was received by the company last night. I just have to wait and see what they say now.
the quality of the samples have been great but I think the person setting up the jigs must be new or something, cause this is stupid. The fist sample I understand as there were minor changes from the original, but the second sample was *** backwards.
the bar was recieved so I'm just waiting on what better be the final sample
cut/ paste from nissanclub from 4/18/07
as posted on .org, the new sample received was welded wrong again!!!!! so I had to cut the welds and weld it. I sent it back and it was received by the company last night. I just have to wait and see what they say now.
the quality of the samples have been great but I think the person setting up the jigs must be new or something, cause this is stupid. The fist sample I understand as there were minor changes from the original, but the second sample was *** backwards.
the bar was recieved so I'm just waiting on what better be the final sample
#54
Originally Posted by taz
I swore this was posted some where else but I can't find it.
cut/ paste from nissanclub from 4/18/07
as posted on .org, the new sample received was welded wrong again!!!!! so I had to cut the welds and weld it. I sent it back and it was received by the company last night. I just have to wait and see what they say now.
the quality of the samples have been great but I think the person setting up the jigs must be new or something, cause this is stupid. The fist sample I understand as there were minor changes from the original, but the second sample was *** backwards.
the bar was recieved so I'm just waiting on what better be the final sample
cut/ paste from nissanclub from 4/18/07
as posted on .org, the new sample received was welded wrong again!!!!! so I had to cut the welds and weld it. I sent it back and it was received by the company last night. I just have to wait and see what they say now.
the quality of the samples have been great but I think the person setting up the jigs must be new or something, cause this is stupid. The fist sample I understand as there were minor changes from the original, but the second sample was *** backwards.
the bar was recieved so I'm just waiting on what better be the final sample
#55
Guest
Posts: n/a
Whatever. The $78 for the strut bar is ABOUT a weeks worth of gas for me. STILL, can't wait 'til they're ready, BUT won't starve to death in the meantime. Have you THOUGHT about selling the design to someone (e.g. like Nismo or Cusco)? L-T, I know, but just looking out for you, Taz...
#60
I was wondering if anyone did the Front Strut Tower Brace and the RSB without lowering...I live in a place with a lot of potholes and can't lower the car but still looking for good suspension...will this FSTB and the Progress RSB WITHOUT lowering still make a good difference, or is it a lost cause?
Joshua
Joshua
#61
Originally Posted by philoforlife
I was wondering if anyone did the Front Strut Tower Brace and the RSB without lowering...I live in a place with a lot of potholes and can't lower the car but still looking for good suspension...will this FSTB and the Progress RSB WITHOUT lowering still make a good difference, or is it a lost cause?
Joshua
Joshua
#62
Originally Posted by philoforlife
I was wondering if anyone did the Front Strut Tower Brace and the RSB without lowering...I live in a place with a lot of potholes and can't lower the car but still looking for good suspension...will this FSTB and the Progress RSB WITHOUT lowering still make a good difference, or is it a lost cause?
Joshua
Joshua
![ThumbsUp](https://maxima.org/forums/images/smilies/thumbsup.gif)
#66
Originally Posted by !PrjctMax!
Get the Progress RSB, Altima SE-R FSB, Racingline rear endlinks, Racingline front endlinks (when available), Racingline FSTB (when available), and Racingline MMI as well! ![ThumbsUp](https://maxima.org/forums/images/smilies/thumbsup.gif)
![ThumbsUp](https://maxima.org/forums/images/smilies/thumbsup.gif)
#72
Nations 1st 6th Gen Turbo
![](https://maxima.org/forums/images/Maxima_OTM.png)
![](https://maxima.org/forums/images/smilies/support.gif)
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Originally Posted by Pronto
![ThumbsDown](https://maxima.org/forums/images/smilies/thumbsdown.gif)
![doublethumbsup](https://maxima.org/forums/images/smilies/dblthumb2.gif)
#74
Originally Posted by !PrjctMax!
You already missed it and it's a FSTB!
i'm too waiting for my FTB...its been awhile now buh i have faith...lolxz
#75
Originally Posted by MisterSparkle
dan i wasn't talking about taz's FTB...i'm talking about the se-r or nismo FRONT SWAY BAR....lol
i'm too waiting for my FTB...its been awhile now buh i have faith...lolxz
i'm too waiting for my FTB...its been awhile now buh i have faith...lolxz
![hide](https://maxima.org/forums/images/smilies/hide.gif)