6th gen 6 speed manual headers....
#1
6th gen 6 speed manual headers....
well upon further inspection my cats are clogged to shhhhhiiiit, going to replace them with aftermarket headers but there are none out for a 6 gen 6 speed yet
should the altima se-r headers work fine as long as they were made for a 6 speed manual altima?
thanks
Chris.
should the altima se-r headers work fine as long as they were made for a 6 speed manual altima?
thanks
Chris.
#2
Originally Posted by marshallc
well upon further inspection my cats are clogged to shhhhhiiiit, going to replace them with aftermarket headers but there are none out for a 6 gen 6 speed yet
should the altima se-r headers work fine as long as they were made for a 6 speed manual altima?
thanks
Chris.
should the altima se-r headers work fine as long as they were made for a 6 speed manual altima?
thanks
Chris.
Good luck, I had to buy a used set of craigslist.
Kamski
#4
Originally Posted by Glude
U ever get those installed?
And my stock cats are all jammed up and one got sucked back in to the motor so nissan has to swap the motor and replace the stock cats before I got and install thease on my car.
Kamski
#6
got sick of trying to figure it out dropped it off at nissan, they want 3290 to replace the manifolds/y pipe and stock catback because they claim the cat material has clogged the stock mufflers
oh well, time for a sp2 and some headers
oh well, time for a sp2 and some headers
#7
Originally Posted by marshallc
got sick of trying to figure it out dropped it off at nissan, they want 3290 to replace the manifolds/y pipe and stock catback because they claim the cat material has clogged the stock mufflers
oh well, time for a sp2 and some headers
oh well, time for a sp2 and some headers
If you want, I can call my tech up and ask him about installs for anything and everything. The guy is very cool and able to do anything for a very low price and some Polski beer!
#8
Originally Posted by !PrjctMax!
DO IT!!!!!!! what Nissan dealership?
If you want, I can call my tech up and ask him about installs for anything and everything. The guy is very cool and able to do anything for a very low price and some Polski beer!
If you want, I can call my tech up and ask him about installs for anything and everything. The guy is very cool and able to do anything for a very low price and some Polski beer!
#9
took it to arlington as it is close to my house. let me know how much he would want for the header install, until then im trying to decide which to buy, and wiating for mark at one6 to come back from vacation to quote me.
#12
Originally Posted by marshallc
got sick of trying to figure it out dropped it off at nissan, they want 3290 to replace the manifolds/y pipe and stock catback because they claim the cat material has clogged the stock mufflers
#13
well altima headers with egr port will fit 6 speed max with no problem. Finish my cousin install with the reg altima headers( no egr) a couple weeks ago. had no fitment issue with them so the ser version shouldn't give none either.
#14
Why not fix the problem at hand? i.e. why did the cats fry in the first place?
Never heard of that brand. Pun intended with intention to find out what brand they were.
Originally Posted by celica
Finish my cousin install with the reg altima headers
#15
Originally Posted by NmexMAX
Why not fix the problem at hand? i.e. why did the cats fry in the first place?
Never heard of that brand. Pun intended with intention to find out what brand they were.
Never heard of that brand. Pun intended with intention to find out what brand they were.
#21
can't find the link of the ones i bbbbbought since it was like 3 months ago but they are the same as these eBay Motors: Nissan Altima 02 03 04 05 06 V6 3.5L Exhaust Headers (item 280141521014 end time Aug-15-07 07:39:03 PDT)
we have the egr plugged right now but goin to get the welded at the end of the month. and yes we do have a check engine light on.
the reason they don't fit the auto's without modification is that the starter is pointed towards the headers on the auto.
we have the egr plugged right now but goin to get the welded at the end of the month. and yes we do have a check engine light on.
the reason they don't fit the auto's without modification is that the starter is pointed towards the headers on the auto.
Thread
Thread Starter
Forum
Replies
Last Post
CorollaULEV
7th Generation Maxima (2009-2015)
30
08-09-2021 08:11 PM
Fakie J Farkerton
4th Generation Classifieds (1995-1999)
1
10-14-2015 06:25 PM
Finkle
4th Generation Maxima (1995-1999)
13
09-27-2015 09:53 PM
Cant_Get_Ryte
5th Generation Classifieds (2000-2003)
3
08-28-2015 06:41 AM
ffcbairn
Maximas for Sale / Wanted
1
08-16-2015 09:29 PM