6th Generation Maxima (2004-2008) Discussion of the 6th generation Maxima. Come see what others are saying.

MAF?

Thread Tools
 
Search this Thread
 
Old Jan 22, 2008 | 11:45 PM
  #1  
jimmypronet's Avatar
Thread Starter
Senior Member
 
Joined: Sep 2007
Posts: 351
From: Fort Worth, Texas Baby
MAF?

Any of you guys where i can get a bigger MAF? and is it plag and play with out harming the car?
Old Jan 23, 2008 | 10:38 AM
  #2  
DeusExMaxima's Avatar
Supporting Maxima.org Member
iTrader: (1)
 
Joined: Nov 2004
Posts: 7,353
From: Upland CA
There is a mod using a Landrover MAF which is larger than ours and gives more power. Nmex is in the know on this one. You will need a piggyback to tune the car which will have more airflow.
Old Jan 23, 2008 | 10:41 AM
  #3  
!PrjctMax!'s Avatar
Senior Member
iTrader: (38)
 
Joined: Mar 2006
Posts: 5,238
From: Chicago
d00d...come on now...we provided you with BOTH the links on the other org...
Old Jan 23, 2008 | 11:20 AM
  #4  
NmexMAX's Avatar
dot dot dot ...
iTrader: (22)
 
Joined: Dec 2000
Posts: 34,576
From: Santa Fe, NM
http://forums.maxima.org/showpost.ph...42&postcount=2
Old Jan 23, 2008 | 11:36 AM
  #5  
shawndon's Avatar
Senior Member
iTrader: (2)
 
Joined: Sep 2006
Posts: 412
Originally Posted by !PrjctMax!
d00d...come on now...we provided you with BOTH the links on the other org...
I was gonna say something but, what's the point? eh
Old Jan 23, 2008 | 11:53 AM
  #6  
jimmypronet's Avatar
Thread Starter
Senior Member
 
Joined: Sep 2007
Posts: 351
From: Fort Worth, Texas Baby
Originally Posted by shawndon
I was gonna say something but, what's the point? eh
Just got here at US having hard time reading english
Old Jan 23, 2008 | 12:11 PM
  #7  
shawndon's Avatar
Senior Member
iTrader: (2)
 
Joined: Sep 2006
Posts: 412
Originally Posted by jimmypronet
Just got here at US having hard time reading english
Never would have guessed.......
Old Jan 23, 2008 | 01:50 PM
  #8  
QwikKota's Avatar
Senior Member
iTrader: (3)
 
Joined: May 2006
Posts: 368
From: Houston, Tx
Originally Posted by shawndon
Never would have guessed.......
Ya'll chill, Jimmy's cool in my book. He's out there wrenchin unlike some.
Old Jan 23, 2008 | 01:52 PM
  #9  
!PrjctMax!'s Avatar
Senior Member
iTrader: (38)
 
Joined: Mar 2006
Posts: 5,238
From: Chicago
Had nothing bad to say about him...just stated that there were 2 links already provided and he posted another thread here...but he did get one more HUGE link, so ya. Good stuff

xoxoxo to all!

Old Jan 23, 2008 | 03:29 PM
  #10  
NmexMAX's Avatar
dot dot dot ...
iTrader: (22)
 
Joined: Dec 2000
Posts: 34,576
From: Santa Fe, NM
Anyone want to read my link?
Old Jan 23, 2008 | 03:33 PM
  #11  
kzoosho's Avatar
Senior Member
iTrader: (16)
 
Joined: Feb 2007
Posts: 4,029
From: Grand rapids Mi
Thank me later

Background information is somewhat deceptive. Here are relative links, and good reading. The concept to all MAF sensors is the same, so just because your specific generation isn't mentioned, the information is still viable. Feel free to do a search on the subject, as that may also be helpful.

General MAF knowledge/principle.
http://forums.maxima.org/showthread.php?t=341223
http://forums.maxima.org/showthread.php?t=344514
http://forums.maxima.org/showthread.php?t=294132

The first person to try it.
http://forums.maxima.org/showthread.php?t=101371

More bandwagoneers.
http://forums.maxima.org/showthread.php?t=390691
http://forums.maxima.org/showthread.php?t=401373
http://forums.maxima.org/showthread.php?t=401569
http://forums.maxima.org/showthread.php?t=406909
http://forums.maxima.org/showthread.php?t=402892
http://forums.maxima.org/showthread.php?t=404074
http://forums.maxima.org/showthread.php?t=400399

Words/thoughts taken out of my mouth after I installed it. (Note: The link in the second URL below is actually linked to the 3" PVC link I posted above, due to the new org set-up, it will send you to an older/off the wall link, just FYI)
http://forums.maxima.org/showpost.ph...12&postcount=7
http://forums.maxima.org/showpost.ph...4&postcount=20
http://forums.maxima.org/showpost.ph...3&postcount=54

More good general MAF housing mod reading:
http://forums.maxima.org/showthread....&highlight=MAF


Maybe they cant click man.
Old Jan 23, 2008 | 03:53 PM
  #12  
!PrjctMax!'s Avatar
Senior Member
iTrader: (38)
 
Joined: Mar 2006
Posts: 5,238
From: Chicago
I book-marked it before Manny!
Old Jan 23, 2008 | 04:20 PM
  #13  
shawndon's Avatar
Senior Member
iTrader: (2)
 
Joined: Sep 2006
Posts: 412
uh

Old Jan 23, 2008 | 04:23 PM
  #14  
redls1's Avatar
MAXIN' ON
iTrader: (2)
 
Joined: Jul 2007
Posts: 1,310
From: TN
Hmm thanks. Bookmarked for future reading.
Old Jan 24, 2008 | 06:11 AM
  #15  
NmexMAX's Avatar
dot dot dot ...
iTrader: (22)
 
Joined: Dec 2000
Posts: 34,576
From: Santa Fe, NM
Did the OP do some research?
Old Jan 24, 2008 | 07:36 AM
  #16  
BigPete's Avatar
Incognito
iTrader: (2)
 
Joined: Oct 2007
Posts: 676
From: 127.0.0.1
Originally Posted by QwikKota
Ya'll chill, Jimmy's cool in my book. He's out there wrenchin unlike some.

amen. Chill the **** out lol
Old Jan 24, 2008 | 08:07 AM
  #17  
NmexMAX's Avatar
dot dot dot ...
iTrader: (22)
 
Joined: Dec 2000
Posts: 34,576
From: Santa Fe, NM
Keep in mind:
http://forums.maxima.org/showpost.ph...7&postcount=67

Taken from:
http://forums.maxima.org/showthread.php?t=542294&page=2
Old Jan 25, 2008 | 10:31 PM
  #18  
jimmypronet's Avatar
Thread Starter
Senior Member
 
Joined: Sep 2007
Posts: 351
From: Fort Worth, Texas Baby
Sorry for the trouble guys...... Thanx
Old Jan 25, 2008 | 10:33 PM
  #19  
!PrjctMax!'s Avatar
Senior Member
iTrader: (38)
 
Joined: Mar 2006
Posts: 5,238
From: Chicago
no trouble
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TallTom
5th Generation Maxima (2000-2003)
57
Oct 14, 2025 05:16 PM
-ReLLiK-
5th Generation Classifieds (2000-2003)
4
Apr 29, 2016 06:25 PM
ballerchris510
3rd Generation Maxima (1989-1994)
9
Sep 10, 2015 09:35 PM
lux97Max
4th Generation Classifieds (1995-1999)
1
Sep 4, 2015 05:42 PM
dcardello
4th Generation Maxima (1995-1999)
7
Sep 3, 2015 11:44 PM




All times are GMT -7. The time now is 07:46 PM.