Chernmax updated phase 3 pictures, check it out!!!
#1
Nations 1st 6th Gen Turbo
Thread Starter
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Chernmax updated phase 3 pictures, check it out!!!
UPDATE 1/29/2008
Went to my first dyno tuning session, man the Split Second FTC can be a real b!tch to program. Had the first tuning session at Ptuning in Manassass Virginia, Toan really knows his stuff and is doing a great job so far. Preliminary numbers after 5 hours and up to 7lbs of boost and 39 pulls later were 312.6Whp and 306.8 FTLBs of TQ
Est 370 crank HP (about 115hp over stock) (5AT)
The car is being tuned on a Dyno Dynamics Dynamometer machine which has also been called a heart breaker because it normally list Dyno pulls about 10-15% below a Dynojet. Toan estimates on a Dynojet the car would be sitting on about 345+whp with 6-7 PSI
Have to remove my IM and drop in some 350Z HKS cold plugs (got them at Ptuning, then take it back next month for the 7-8psi tune and play with the timing...
So it's a start that I'm extremely happy with and the 2-1/2 hr drive home was awesome...
As stated in my prior post, painted the Intercooler semi-flat black for the tie in up front...
Went to my first dyno tuning session, man the Split Second FTC can be a real b!tch to program. Had the first tuning session at Ptuning in Manassass Virginia, Toan really knows his stuff and is doing a great job so far. Preliminary numbers after 5 hours and up to 7lbs of boost and 39 pulls later were 312.6Whp and 306.8 FTLBs of TQ
Est 370 crank HP (about 115hp over stock) (5AT)
The car is being tuned on a Dyno Dynamics Dynamometer machine which has also been called a heart breaker because it normally list Dyno pulls about 10-15% below a Dynojet. Toan estimates on a Dynojet the car would be sitting on about 345+whp with 6-7 PSI
Have to remove my IM and drop in some 350Z HKS cold plugs (got them at Ptuning, then take it back next month for the 7-8psi tune and play with the timing...
So it's a start that I'm extremely happy with and the 2-1/2 hr drive home was awesome...
As stated in my prior post, painted the Intercooler semi-flat black for the tie in up front...
Last edited by chernmax; 01-29-2008 at 12:26 PM.
#32
Congrats on a great project chris... You are the 6th gen god ... LOL... well you and dues ...
anyway...
Now... onto other things... when will you be tracking/dynoing it ????
I would pay for your track day if you can get a qtr mile run out of her.. ...
Im saying low 12's... Maybe high 11's? ... hows the tranny holding up.. and when will you be talking to the shop/company thats building you the custom tranny????
anyway...
Now... onto other things... when will you be tracking/dynoing it ????
I would pay for your track day if you can get a qtr mile run out of her.. ...
Im saying low 12's... Maybe high 11's? ... hows the tranny holding up.. and when will you be talking to the shop/company thats building you the custom tranny????
#36
Nations 1st 6th Gen Turbo
Thread Starter
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
UPDATE 1/29/2008
Went to my first dyno tuning session, man the Split Second FTC can be a real b!tch to program. Had the first tuning session at Ptuning in Manassass Virginia, Toan really knows his stuff and is doing a great job so far. Preliminary numbers after 5 hours and up to 7lbs of boost and 39 pulls later were 312.6Whp and 306.8 FTLBs of TQ
Est 370 crank HP (about 115hp over stock) (5AT)
The car is being tuned on a Dyno Dynamics Dynamometer machine which has also been called a heart breaker because it normally list Dyno pulls about 10-15% below a Dynojet. Toan estimates on a Dynojet the car would be sitting on about 345+whp with 6-7 PSI
Have to remove my IM and drop in some Japanese 350Z NGK cold plugs (LFR6A-11, got them at Ptuning), then take it back next month for the 7-8psi tune and play with the timing...
So it's a start that I'm extremely happy with and the 2-1/2 hr drive home was awesome...
Pictures...
Oh and one of the employees at PTuning has a Beautiful 5.5 Gen with only 20K miles, unfortunitely he had the car at the shop for repairs because someone broke into it in Alexandria VA and gutted his new dash electronic's, sorry didn't have the heart for the inside shot but if you look closely at the passenger door window frame, you can see the metal pulled back from the big a$$ screwdriver someone used...
Beautiful Max non the less...
Went to my first dyno tuning session, man the Split Second FTC can be a real b!tch to program. Had the first tuning session at Ptuning in Manassass Virginia, Toan really knows his stuff and is doing a great job so far. Preliminary numbers after 5 hours and up to 7lbs of boost and 39 pulls later were 312.6Whp and 306.8 FTLBs of TQ
Est 370 crank HP (about 115hp over stock) (5AT)
The car is being tuned on a Dyno Dynamics Dynamometer machine which has also been called a heart breaker because it normally list Dyno pulls about 10-15% below a Dynojet. Toan estimates on a Dynojet the car would be sitting on about 345+whp with 6-7 PSI
Have to remove my IM and drop in some Japanese 350Z NGK cold plugs (LFR6A-11, got them at Ptuning), then take it back next month for the 7-8psi tune and play with the timing...
So it's a start that I'm extremely happy with and the 2-1/2 hr drive home was awesome...
Pictures...
Oh and one of the employees at PTuning has a Beautiful 5.5 Gen with only 20K miles, unfortunitely he had the car at the shop for repairs because someone broke into it in Alexandria VA and gutted his new dash electronic's, sorry didn't have the heart for the inside shot but if you look closely at the passenger door window frame, you can see the metal pulled back from the big a$$ screwdriver someone used...
Beautiful Max non the less...
Last edited by chernmax; 01-29-2008 at 06:41 PM.