Chernmax updated phase 3 pictures, check it out!!!
#81
Nations 1st 6th Gen Turbo
Thread Starter
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
- Rims: O.Z. Crono HT Black (19.5 lbs) (18X8 - 5x114mm offset)(With Eibach 5mm spacer kit)
- Tires: BFGoodrich g-Force T/A KDW 2 (Ultra High Performance) (255/45ZR/18-99Y)
Available at Fastbrakes.com
- Wilwood 4 piston BBK with 13.23" rotors front
- Wilwood 4 piston BBK with 12.9" rotors rear
- Hawk HPS brake pads
Last edited by chernmax; 03-05-2008 at 08:52 AM.
#82
Nations 1st 6th Gen Turbo
Thread Starter
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Also now that the tranny is dropped, I'm now able to install the rear (front is installed already) Racingline Motor Mount Insert (MMI) which will stiffen up the engine a bit more...
#84
Nations 1st 6th Gen Turbo
Thread Starter
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Still a 2" drop up front but I jacked the back up to stock height for a more level stance. After shaving the front RLM bumper 1-1/2" I now have 5-1/2" of ground clearance up front.
Last edited by chernmax; 03-06-2008 at 02:39 PM.
#85
#89
It's in the shop now, tranny upgrades include beefed up valve body, torque converter and clutch pack and some other minor things.
Also now that the tranny is dropped, I'm now able to install the rear (front is installed already) Racingline Motor Mount Insert (MMI) which will stiffen up the engine a bit more...
Also now that the tranny is dropped, I'm now able to install the rear (front is installed already) Racingline Motor Mount Insert (MMI) which will stiffen up the engine a bit more...
#91
Available at Tirerack.com
- Rims: O.Z. Crono HT Black (19.5 lbs) (18X8 - 5x114mm offset)(With Eibach 5mm spacer kit)
- Tires: BFGoodrich g-Force T/A KDW 2 (Ultra High Performance) (255/45ZR/18-99Y)
Available at Fastbrakes.com
- Wilwood 4 piston BBK with 13.23" rotors front
- Wilwood 4 piston BBK with 12.9" rotors rear
- Hawk HPS brake pads
- Rims: O.Z. Crono HT Black (19.5 lbs) (18X8 - 5x114mm offset)(With Eibach 5mm spacer kit)
- Tires: BFGoodrich g-Force T/A KDW 2 (Ultra High Performance) (255/45ZR/18-99Y)
Available at Fastbrakes.com
- Wilwood 4 piston BBK with 13.23" rotors front
- Wilwood 4 piston BBK with 12.9" rotors rear
- Hawk HPS brake pads
#94
Supporting Maxima.org Member
iTrader: (16)
Join Date: Nov 2004
Location: Denver, Colorado
Posts: 2,761
It's in the shop now, tranny upgrades include beefed up valve body, torque converter and clutch pack and some other minor things.
Also now that the tranny is dropped, I'm now able to install the rear (front is installed already) Racingline Motor Mount Insert (MMI) which will stiffen up the engine a bit more...
Also now that the tranny is dropped, I'm now able to install the rear (front is installed already) Racingline Motor Mount Insert (MMI) which will stiffen up the engine a bit more...
#95
Nations 1st 6th Gen Turbo
Thread Starter
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
When I get the 411 I will post the info, places like Level 10 tranny and Speed Force Racing know what is needed but they guard the info like some State secret (because they want me to ship my tranny to them and I already have a more than qualified tech to do mine right where I live). So currently I'm doing research with my tranny guy trying to locate said parts. If the're out there, I'll find them...
#96
Supporting Maxima.org Member
iTrader: (16)
Join Date: Nov 2004
Location: Denver, Colorado
Posts: 2,761
I know you will. The way our tranny's are dropping there will definitely be a market for better parts. I plan on keeping my car for a long time, unfortunately I don't have a lot of faith in the rebuilt tranny the dealership put in my car . I am expecting at some point, I will probably need to replace it again. By then it will be out of pocket expense, but maybe by then we may be able to rebuild them "better, stronger, faster" LOL.
#97
Nations 1st 6th Gen Turbo
Thread Starter
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
LOL.....well I guess I can understand to point, their R&D etc and helps their cars go faster.
I know you will. The way our tranny's are dropping there will definitely be a market for better parts. I plan on keeping my car for a long time, unfortunately I don't have a lot of faith in the rebuilt tranny the dealership put in my car . I am expecting at some point, I will probably need to replace it again. By then it will be out of pocket expense, but maybe by then we may be able to rebuild them "better, stronger, faster" LOL.
I know you will. The way our tranny's are dropping there will definitely be a market for better parts. I plan on keeping my car for a long time, unfortunately I don't have a lot of faith in the rebuilt tranny the dealership put in my car . I am expecting at some point, I will probably need to replace it again. By then it will be out of pocket expense, but maybe by then we may be able to rebuild them "better, stronger, faster" LOL.
#99
Nations 1st 6th Gen Turbo
Thread Starter
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
When you're dedicated to a project ANYTHING is possible, when SOOOOO many said a turbo 6th gen was impossible I made believers and fools out of numerous members of 3 different Maxima forums, these projects are not easy nor cheap so with that said, my easiest day is always yesterday...
#103
Nations 1st 6th Gen Turbo
Thread Starter
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Nothing wrong with a little added safety...
#104
Thread
Thread Starter
Forum
Replies
Last Post
bbsitum
4th Generation Maxima (1995-1999)
4
09-11-2015 04:55 PM
doctorpullit
8th Generation Maxima (2016-)
11
09-10-2015 06:33 PM
Hdnseek
5th Generation Maxima (2000-2003)
3
09-09-2015 05:55 AM