Got some new wheels....... o yea they came with the car :)
08-01-2008, 01:18 PM
#42
yellow lip is rice.
also what kinda suspension does that black max have?
and what are those wheels?! (mesh type)
and if you do decide to paint the volks. you can call mackin industries and take photos of your wheels.
tell them someone stole the stickers.
and they'll mail you out as many as you need.but you have to prove that they're legitimate volks
also what kinda suspension does that black max have?
and what are those wheels?! (mesh type)
and if you do decide to paint the volks. you can call mackin industries and take photos of your wheels.
tell them someone stole the stickers.
and they'll mail you out as many as you need.but you have to prove that they're legitimate volks
08-01-2008, 02:02 PM
#43
thanks for the tip jingiko!, Im 98% sure I'll be keeping the mesh wheels but I will try the volks on, so who know I might change my mind 
the black wheels are mst 1.3, suspension is just springs with stock shocks, cant remember the brand on the springs.
and kamski call me "PUMAX"
the black wheels are mst 1.3, suspension is just springs with stock shocks, cant remember the brand on the springs.
and kamski call me "PUMAX"
08-01-2008, 03:06 PM
#45
08-01-2008, 03:39 PM
#47
my silver max is not dropped I had some rubbing in the rear when I had passengers.
guys thanks for all your comments, there hasn't been a minute were I regret buying the car before selling my other one
guys thanks for all your comments, there hasn't been a minute were I regret buying the car before selling my other one
08-02-2008, 05:21 AM
#48
08-02-2008, 08:50 AM
#50
they were made by MST and model is 1.3 I believe.
2 they are actual ferrari brakes made by brembo, the whole kit brakets and everyting was done by them.
3 working on it
08-03-2008, 11:59 PM
#59
Newbie - Just Registered
Join Date: Jul 2008
Location: Maywood, CA
Posts: 9
Who is "them"
Are those wheels available in a smaller size?
Is the VDC system affected by doing a brake swap?
These past two weekend I've driven Angles Crest HWY, Angeles Forest, Muhalland Dr., Topanga Canyon, and Old Topanga Canyon. One thing I've wished for is bigger better brakes. Especially since I've been doing my canyon carving at around 2am or later. In the darkness it helps to have better brakes because some corners really surprise you since its sometimes very hard to see what is coming up.
I got my Maxima on June 21st and I've driven 3997 miles to date
08-04-2008, 12:18 AM
#60
08-04-2008, 12:21 AM
#61
Newbie - Just Registered
Join Date: Jul 2008
Location: Maywood, CA
Posts: 9
NVM on THAT brake kit then!
Is it possible to use the 350Z's Brembo kit on our cars?! I really wanna work on the brakes and hadling of this car. I got too used to a car with good brakes and a stiff suspension with a huge swaybar. I know the VDC saved my *** a few times this moring that's why I'm not too fond of getting rid of it.
Is it possible to use the 350Z's Brembo kit on our cars?! I really wanna work on the brakes and hadling of this car. I got too used to a car with good brakes and a stiff suspension with a huge swaybar. I know the VDC saved my *** a few times this moring that's why I'm not too fond of getting rid of it.
08-04-2008, 07:56 AM
#62
NVM on THAT brake kit then!
Is it possible to use the 350Z's Brembo kit on our cars?! I really wanna work on the brakes and hadling of this car. I got too used to a car with good brakes and a stiff suspension with a huge swaybar. I know the VDC saved my *** a few times this moring that's why I'm not too fond of getting rid of it.
Is it possible to use the 350Z's Brembo kit on our cars?! I really wanna work on the brakes and hadling of this car. I got too used to a car with good brakes and a stiff suspension with a huge swaybar. I know the VDC saved my *** a few times this moring that's why I'm not too fond of getting rid of it.
Thread
Thread Starter
Forum
Replies
Last Post
Lakersallday24
6th Generation Maxima (2004-2008)
10
06-16-2019 01:35 AM
kjlouis
4th Generation Maxima (1995-1999)
11
11-24-2018 06:09 AM