My secret project rear diffuser
#1
Supporting Maxima.org Member
Thread Starter
iTrader: (1)
Join Date: Nov 2004
Location: Upland CA
Posts: 7,353
My secret project rear diffuser
So, Im thinking of things I can do with the car to make it look better. I made a diffuser styled after the new GTR, but then broke one of the diffuser fins. Then I switched to single output exhaust. As I was looking for ways to improve the rear more, I came across a diffuser that I loved.
Here is what I know about it:
It is made for a JDM only Mitsubishi Evo and is a copy of a brand called Voltex. Its made of carbon fiber of course. It can be sort of modified for a USDM Evo, but it is wider than the USDM Evo. I found these on ebay and other websites. I went to a local distributor and test fit it and it seemed to work.
The first order of business was to remove the lower part of the rear fender (shown in the pic) by cutting it off and sanding smooth:
Then it just bolts right up using brackets. I had to grind a tiny bit so it didnt hit the muffler. The front part of it stops right where the rear mudflap ends.
More pics:
Here is what I know about it:
It is made for a JDM only Mitsubishi Evo and is a copy of a brand called Voltex. Its made of carbon fiber of course. It can be sort of modified for a USDM Evo, but it is wider than the USDM Evo. I found these on ebay and other websites. I went to a local distributor and test fit it and it seemed to work.
The first order of business was to remove the lower part of the rear fender (shown in the pic) by cutting it off and sanding smooth:
Then it just bolts right up using brackets. I had to grind a tiny bit so it didnt hit the muffler. The front part of it stops right where the rear mudflap ends.
More pics:
#3
I have to say thats not a mod I would be on the lookout for, but i think you pulled it off quite well. You are always trying new things props for that. I would love a rear diffuser but that would serve as a snow catcher for me here in maine. Nice job deus as usual
P.S. how long did that take?
P.S. how long did that take?
#4
Supporting Maxima.org Member
Thread Starter
iTrader: (1)
Join Date: Nov 2004
Location: Upland CA
Posts: 7,353
I have to say thats not a mod I would be on the lookout for, but i think you pulled it off quite well. You are always trying new things props for that. I would love a rear diffuser but that would serve as a snow catcher for me here in maine. Nice job deus as usual
P.S. how long did that take?
P.S. how long did that take?
#5
yo for what ive seen since i become a member here is that u dont stop trying to hook up the max to the maximum lol but in my opinion that looks amazing! i think with the double exhaust tips it would look tight too what u think? if that becomes a prototype of a new body kit im down for it!
plus the the gurl shes sexy lol
plus the the gurl shes sexy lol
Last edited by bandulu; 11-24-2008 at 11:19 PM.
#10
Supporting Maxima.org Member
iTrader: (16)
Join Date: Nov 2004
Location: Denver, Colorado
Posts: 2,761
If it paint matched the car and a diff muffler I would probably like it better. That muffler just looks out of place there, maybe more of an oval shape or something like that.
Did you make it yourself, it seems to fit pretty good.
Did you make it yourself, it seems to fit pretty good.
#14
Whats the width measurement cause I may look into this . I still need to do the CF side splitters like you.
btw I think you could add this to the center piece maybe but it might make it too low.
http://www.kamispeed.com/product_inf...63db99c4d7ef4b
PS heads up deus I'll be out in Vegas this August 2009, we should meet up some time and snap some pics of our cars together.
btw I think you could add this to the center piece maybe but it might make it too low.
http://www.kamispeed.com/product_inf...63db99c4d7ef4b
PS heads up deus I'll be out in Vegas this August 2009, we should meet up some time and snap some pics of our cars together.
#15
Supporting Maxima.org Member
Thread Starter
iTrader: (1)
Join Date: Nov 2004
Location: Upland CA
Posts: 7,353
Whats the width measurement cause I may look into this . I still need to do the CF side splitters like you.
btw I think you could add this to the center piece maybe but it might make it too low.
http://www.kamispeed.com/product_inf...63db99c4d7ef4b
PS heads up deus I'll be out in Vegas this August 2009, we should meet up some time and snap some pics of our cars together.
btw I think you could add this to the center piece maybe but it might make it too low.
http://www.kamispeed.com/product_inf...63db99c4d7ef4b
PS heads up deus I'll be out in Vegas this August 2009, we should meet up some time and snap some pics of our cars together.
I have an extra CF side splitter I can sell you if u like. Just slice in down the middle and ur there. The center diffuser fins would not be too low. I could probably make some fins to fit, maybe some small ones. Photoshop anyone????
#16
It looks okay... but better than the GT-R bumper. +1 on painting it body color.
Just curious... are your tires still backward? Cuz from the close-ups they look like they are backward. It's gonna rain this week, so you should check on that.
Just curious... are your tires still backward? Cuz from the close-ups they look like they are backward. It's gonna rain this week, so you should check on that.
#22
Nations 1st 6th Gen Turbo
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
It looks OK but I think it would look better if it could all be tied in, smooth out, and professonably painted the same color, IMO it would look better if you had 2 duel mufflers also, right now it looks like body work that wasn't finished right and the rear is starting to look very busy. But again 2 thumbs up for trying something new!!!
Last edited by chernmax; 11-25-2008 at 10:10 PM.
#26
Hey Chern>>>>>http://forums.maxima.org/6th-generat...show-pics.html or just go to the thread. It should be the first pic.
#27
Nations 1st 6th Gen Turbo
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Hey Chern>>>>>http://forums.maxima.org/6th-generat...show-pics.html or just go to the thread. It should be the first pic.
Thread
Thread Starter
Forum
Replies
Last Post
doctorpullit
8th Generation Maxima (2016-)
11
09-10-2015 06:33 PM
flu2000
7th Generation Maxima (2009-2015)
5
09-08-2015 02:23 PM