6th Generation Maxima (2004-2008) Discussion of the 6th generation Maxima. Come see what others are saying.

Dash lights

Thread Tools
 
Search this Thread
 
Old Feb 20, 2011 | 04:30 AM
  #1  
tcastillo18's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2009
Posts: 25
Dash lights

I just installed a backup camera in my 04 max that works with my pioneer avh4200DVD. I saw people post to tap into the reverse light to make it work. So after hours of having my car apart and finally getting it to work I was at ease.

But now I have another issue. For some reason when I turn my car on, the dash lights go on, but when I turn my headlights on they turn off. I first tried to check the dimmer switch but that didn't fix the problem. I then check all the fuses in the car, and they were all fine. I then check all the fuses outside in the engine area, they were fine. Then my friend suggested to switch my relays in and out with another one to see if one of them went bad. Yeah, that didnt work either. I did not have this problem before I did this job. Did anyone who installed a reverse cam in their car have this issue? I just want to fix it and still have my reverse cam working properly. In the mean time I am going to disconnectthe wire that I spliced into the reverse light by my taillightto seeifthatfixes the problem. ThankS


Edit-

So I got a service engine light come on and it is throwing 5 codes, Damn

P1614 X 2
U1001 X 2
U1000 X 2
P0183
P0462

Can this be all caused from a ground issue I made?

Last edited by tcastillo18; Feb 20, 2011 at 06:23 AM.
Old Feb 20, 2011 | 11:58 AM
  #2  
tcastillo18's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2009
Posts: 25
Friend thinks the dimmer switch went bad, do yall think that would fix this problem?
Old Feb 20, 2011 | 12:24 PM
  #3  
chris350's Avatar
Member
 
Joined: Jun 2005
Posts: 205
did you try disconnecting the wire you connected to the camera and see if that worked?
Old Feb 20, 2011 | 01:31 PM
  #4  
tcastillo18's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2009
Posts: 25
Yeah tried that, and even disconnected the wire that powers the camera. My friend made me test the dimmer switch wire plug and it is getting power when I turn on my lights. Saying it is probably the resistor in the dimmer switch. What do yall think?

Originally Posted by chris350
did you try disconnecting the wire you connected to the camera and see if that worked?
Old Feb 20, 2011 | 09:00 PM
  #5  
Ballanovafl561's Avatar
Newbie - Just Registered
 
Joined: Jun 2010
Posts: 2
you have a communication issue also now as (can network )
Old Feb 20, 2011 | 09:15 PM
  #6  
Tommiekatt916's Avatar
Member
 
Joined: Jan 2011
Posts: 67
From: Rochester, NY
On the harness adapter for the dvd player try disconnecting the orange and orange w white and see if that solves the problem. Those are dimmer wires and I have heard of feed back on the org/wht wire when a cam is installed... Ive never seen it my self just read about it once on a 12v forum.

It thats the prob you may need to diode isolate the wires.... hopefully no damage was done to the can system
Old Feb 21, 2011 | 04:11 AM
  #7  
tcastillo18's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2009
Posts: 25
Yeah, the u codes. I looked up what each meant. Wish it was more specific.

Originally Posted by Ballanovafl561
you have a communication issue also now as (can network )
Old Feb 21, 2011 | 04:14 AM
  #8  
tcastillo18's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2009
Posts: 25
You know what I have those connected on my wire harness and sometimes it bothers me that it dims. Eden though I set it up that way. I will try that out and see if that fixes the problem. Thanks.

Originally Posted by Tommiekatt916
On the harness adapter for the dvd player try disconnecting the orange and orange w white and see if that solves the problem. Those are dimmer wires and I have heard of feed back on the org/wht wire when a cam is installed... Ive never seen it my self just read about it once on a 12v forum.

It thats the prob you may need to diode isolate the wires.... hopefully no damage was done to the can system
Old Feb 21, 2011 | 04:56 AM
  #9  
tcastillo18's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2009
Posts: 25
Tried it out and no dice. Going to switch out the dimmer switch and if that doesn't fix it. Going to take it to the stealership.

Originally Posted by Tommiekatt916
On the harness adapter for the dvd player try disconnecting the orange and orange w white and see if that solves the problem. Those are dimmer wires and I have heard of feed back on the org/wht wire when a cam is installed... Ive never seen it my self just read about it once on a 12v forum.

It thats the prob you may need to diode isolate the wires.... hopefully no damage was done to the can system
Old Feb 21, 2011 | 06:35 AM
  #10  
tcastillo18's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2009
Posts: 25
So I made a jumper wire from the red/yellow wire to the black wire from the dimmer switch plug. Tested it out to see what the dash lights would do and they stayed on. So I really think it is the dimmer switch, it might be more than that but that is going to be one thing out the way. I just ordered it from courtesyparts and wont get the part (illumination control switch) until next week. After I get the part I will reset ECU to get rid of the check engine light. I will then drive around to see if it comes back up and figure out what codes are left if there are any. Will report back with my findings.

O, also on another forum someone had my same problem and someone suggested to check the fuse for the tail lamp. Mine was not blown but replaced it anyways and it didn't fix my problem either.
Old Mar 3, 2011 | 04:54 PM
  #11  
tcastillo18's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2009
Posts: 25
Fixed the problem

So after receiving the dimmer switch form courtesy parts today it fixed the problem. I rest the ECU to get rid of the service engine light and it has not come back on. I drove my car for 15 minutes straight, turning lights on, using the blinkers, turning on hazards, turning lights on and off. After all that dash lights work fine and no service engine light. Did one last test and went to walmart to buy new wiper blades and no engine light so I think I am good. Just putting this out there for anyone in this scenario. Who would have thought that the dimmer switch going bad would throw those 5 codes. Now I am going to treat myself to some rims to complete all the mods I have done to my car.
Old Mar 3, 2011 | 10:30 PM
  #12  
6.5affiliate's Avatar
Senior Member
 
Joined: May 2010
Posts: 1,506
From: inside my own mind
pics?
Old Mar 4, 2011 | 04:25 AM
  #13  
tcastillo18's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2009
Posts: 25
I wil post pics of all the stuff I did to my car once I put some new shoes on it. Give me a few days.
Old Mar 4, 2011 | 09:11 PM
  #14  
6.5affiliate's Avatar
Senior Member
 
Joined: May 2010
Posts: 1,506
From: inside my own mind
Sounds good....can't wait to see some pics of what your ride with the new rims and dash lights
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mvm062
Infiniti I30/I35
3
Nov 30, 2020 09:00 AM
fastcarny
5th Generation Maxima (2000-2003)
2
Oct 6, 2015 10:42 AM
rnb754
4th Generation Maxima (1995-1999)
6
Sep 14, 2015 11:39 PM
Maxie40
General Maxima Discussion
1
Sep 14, 2015 11:28 AM
Maxima30
5th Generation Maxima (2000-2003)
2
Sep 7, 2015 06:13 PM




All times are GMT -7. The time now is 01:51 PM.