im tryin to figure out if my ecu ecm pcm w.e u wanna call it is bad
#1
im tryin to figure out if my ecu ecm pcm w.e u wanna call it is bad
hello nissan people im having a problem with my 04 nissan maxima .... It sat for 5 months and now she wont start at ... im throwing codes P0403:
U1001: U1000: P1564: P0102: P0118:P0463:P0223: P0222: P0123: P1111
P1136... if i jump the fuel pump she runs like **** ..... plse help a brother out
U1001: U1000: P1564: P0102: P0118:P0463:P0223: P0222: P0123: P1111
P1136... if i jump the fuel pump she runs like **** ..... plse help a brother out
#2
This is a real mish-mash of codes. The U1000 and U1001 codes are most likely causing all the others. The codes all indicate that the ECM cannot read the data from some sensor, such as the throttle position sensor, the valve timing unit (IVT), the MAF and others
U1000 CAN COMMUNICATION LINE
ECM cannot communicate to other control units.
U1001 CAN COMMUNICATION LINE
ECM cannot communicate for more than the specified time.
Whether the ECM is bad or not is hard to say. It may be a wiring problem. Cars that sit for extended amounts of time sometimes get invaded by mice or squirrels that nest in the wires and chew on them.
U1000 CAN COMMUNICATION LINE
ECM cannot communicate to other control units.
U1001 CAN COMMUNICATION LINE
ECM cannot communicate for more than the specified time.
Whether the ECM is bad or not is hard to say. It may be a wiring problem. Cars that sit for extended amounts of time sometimes get invaded by mice or squirrels that nest in the wires and chew on them.
#3
This is a real mish-mash of codes. The U1000 and U1001 codes are most likely causing all the others. The codes all indicate that the ECM cannot read the data from some sensor, such as the throttle position sensor, the valve timing unit (IVT), the MAF and others
U1000 CAN COMMUNICATION LINE
ECM cannot communicate to other control units.
U1001 CAN COMMUNICATION LINE
ECM cannot communicate for more than the specified time.
Whether the ECM is bad or not is hard to say. It may be a wiring problem. Cars that sit for extended amounts of time sometimes get invaded by mice or squirrels that nest in the wires and chew on them.
U1000 CAN COMMUNICATION LINE
ECM cannot communicate to other control units.
U1001 CAN COMMUNICATION LINE
ECM cannot communicate for more than the specified time.
Whether the ECM is bad or not is hard to say. It may be a wiring problem. Cars that sit for extended amounts of time sometimes get invaded by mice or squirrels that nest in the wires and chew on them.
#4
like your maxima is on house arrest?
Do you have any more info on this device?
Thread
Thread Starter
Forum
Replies
Last Post
lowpost99
1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
7
05-16-2021 11:18 AM
FlaMark
5th Generation Maxima (2000-2003)
25
08-28-2015 10:15 AM