6th Generation Maxima (2004-2008) Discussion of the 6th generation Maxima. Come see what others are saying.

2006 nissan max after rostra solenoid replace

Thread Tools
 
Search this Thread
 
Old 09-14-2014, 04:47 PM
  #1  
Newbie - Just Registered
Thread Starter
 
DrobMax's Avatar
 
Join Date: Sep 2014
Posts: 1
2006 nissan max after rostra solenoid replace

Okay I replaced my 2006 nissan maxima with the rostra solenoids. I attempted the relearn procedure but the same problems still exists. So I tried a road test that consisted of 60 miles and it drove the highway no problem staying in 5th gear coasting. Once I came to a red light the maxima hesitated to move after coming to a stop position. Also when I try to reverse the motor just revs to about 4k rpm and trys to move but acts like it's skipping. Then when place in drive the same problem. Any suggestions
DrobMax is offline  
Old 09-28-2014, 05:29 AM
  #2  
Member
iTrader: (4)
 
Khamisalminawi's Avatar
 
Join Date: May 2011
Location: brooklyn,ny
Posts: 220
Usually means from my experiance that the internal gears/pump inside tranny are worn and when it gets hot the fluid thins out. If its good when cold you should consider adding an extra tranny fluid cooler by radiator
Khamisalminawi is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
maxprivate
Forced Induction
21
07-08-2017 09:48 AM
SmokinMax02
5th Generation Maxima (2000-2003)
18
09-11-2015 12:25 AM
doobadoo
4th Generation Maxima (1995-1999)
2
08-15-2015 06:43 PM
follyburr
6th Generation Maxima (2004-2008)
0
08-12-2015 08:57 PM



Quick Reply: 2006 nissan max after rostra solenoid replace



All times are GMT -7. The time now is 09:12 PM.