Good man, thanks!

 

Couple guys had asked me to post pictures. A little late, but here are a couple shots with the spacers installed. I went with 20mm in the front & 25mm in the rear.

 

^ looks great! Front and rear shot?

 

Thanks! I didn't have a good rear shot, sun was in front of the car. Ill take a couple more.

 

Quick question if anyone knows off the top of there head, I'm looking to get the 370z Rays and if I do buy them will I be able to keep my spacers on and it will stay flush? This is with 20F and 25R

 

The offset will be different. Spacers will not be needed in the rear. Ghozt has 5 mm up front with his Rays. Shoot him a pm.

 

Im wondering if the 20/25 combo would look good on a non lowered Max with the factory 18's. hmmmmmm

 

EDITED Below.. I was giving bad info..


It does..

 

I have that same setup, however I'm lowered. I think lowered or not with 18's you can still add an additional 2-5mm all around and be safe.

 

Correction.. Mr. Ghozt is running a 10mm in the rear with the 370Z rays, and has a 25mm front but feels 30mm would be ideal (which they do not make).. FYI

 

this is what my setup looks like with 25mm in front, 10mm in rear, lowered on BC coils. this is just temporary im lookin at some new shoes for the Max soon

 

Correction on me.....I thought you just had the spacers on the front.

 

Is there a reason why folks are going with the black spacers as opposed to the regular silver looking spacers?

With the silver wheels, I would think silver spacers would match well. Further... Black wheels with black spacers.

Correct me if I'm wrong. Your opinions?

 

For me, my rotor hats are black and rims are a dark gunmetal so the silver spacer looked wack. From what I see most people have black painted hats on their rotors so I'm guessing that is why.

 

Interesting...

Thanks for the quick reply!

 

I have the silver oem's and went with silver spacers. It's ok, but black matches and blends with the hub perfectly.

 

Josh, I'd like to get 5mm spacers in DRS Black. Do you have a discount code available for this Summer?

 

Ahh snap should I do it? About to purchase a set of 20mms to test the rear. If I like it I'll move those up front and get some 25's for the back.

Or save a few bucks n get the silver?

 

Get the black.... they blend in with the rotor hats.

 

so how wide I can go with my eibach pro without rubbing or damaging something? bcuz I`m thinking to buy front 25mm and rear 30mm...

 

I am a new owner to a 2010 Nissan Maxima sv and want to lower my car with lowering springs and then use spacers on the stock wheels flr
that flush oem look for now. I need help with finding the right spacers if anyone can help me out please