7th Generation Maxima (2009-2015) Come in and talk about the 7th generation Maxima

Nissan Oil Filter Wrench

Thread Tools
 
Search this Thread
 
Old 09-06-2014, 01:46 PM
  #1  
Junior Member
Thread Starter
 
05RLS2's Avatar
 
Join Date: Jul 2014
Location: Middle Tennessee
Posts: 75
Nissan Oil Filter Wrench

I was looking at the FSM documentation for changing the oil on the Maxima, and it says to use special tool to remove the oil filter. The part number is KV10115801 (J-38956). I've searched, and I can't find anyone that sells it. I'm assuming the part number has changed. Can anyone tell me what the correct part number is and where I can order this filter wrench online?
05RLS2 is offline  
Old 09-06-2014, 02:47 PM
  #2  
Senior Member
iTrader: (6)
 
BigLou55's Avatar
 
Join Date: Jan 2011
Location: Georgia
Posts: 1,187
Oil filter should be no more than hand tight. Most shops will tighten the crap out of them where you have to use a wrench or channel locks. My 5th has the oil filter on hand tight and I've never an issue with oil leaking from there. Point is you should not need one unless this is the first time your changing the oil on your 7th gen yourself.
BigLou55 is offline  
Old 09-06-2014, 03:05 PM
  #3  
Senior Member
iTrader: (1)
 
ateick's Avatar
 
Join Date: Sep 2008
Location: Ontario, Canada
Posts: 496
You don't need anything exotic for a filter wrench and I'm sure the dealer one is crazy expensive. Just go to a parts store and buy a generic one. i prefer a metal bandwrench. Allows for good leverage and doesn't crush like those claw ones. Remember their are different sizes. You want one that would fit around a beer can maybe a king can.
ateick is offline  
Old 09-06-2014, 04:14 PM
  #4  
Senior Member
 
Richard66's Avatar
 
Join Date: Jun 2011
Posts: 1,648
I use nothing more than a small pipe wrench. Small enough for the tight place and opens large enough to grab the filter.
Richard66 is offline  
Old 09-06-2014, 05:16 PM
  #5  
Junior Member
Thread Starter
 
05RLS2's Avatar
 
Join Date: Jul 2014
Location: Middle Tennessee
Posts: 75
Is there a certain type of oil filter wrench or socket that works best? For almost 10 years I've been driving vehicles with GM Ecotec engines that have the cartridge style filters. I've heard that it's a tight fit when changing the filter on the Maxima, so I wasn't for sure if the special tool aided in the narrow space.
05RLS2 is offline  
Old 09-06-2014, 06:28 PM
  #6  
Member
 
boatguy272's Avatar
 
Join Date: Oct 2010
Location: Chicago, IL
Posts: 124
never needed anything more then my hand to take off any filter I put on,,,,, ALWAYS oil the gasket first as well
boatguy272 is offline  
Old 09-07-2014, 02:38 AM
  #7  
Supporting Maxima.org Member
iTrader: (2)
 
1996blackmax's Avatar
 
Join Date: Jan 2003
Location: San Diego, Ca
Posts: 4,534
Whenever I've done my oil changes I just used my hand for the filter.
1996blackmax is offline  
Old 09-07-2014, 05:31 AM
  #8  
Senior Member
 
Ghozt's Avatar
 
Join Date: Nov 2010
Location: Maryland
Posts: 4,020
take it off with your hand
Ghozt is offline  
Old 09-08-2014, 11:10 AM
  #9  
Member
 
VVhite-0ut's Avatar
 
Join Date: Mar 2014
Location: Pittsburgh, PA
Posts: 283
Yeah good luck using that thing anyway. I tried (obviously I was brain dead at the time) and spent a good 20 minutes messing with it until I was so angry I just took it off with my hand (that, and probably the addition of trying to loosen it over time) lol but jeeeeeeez. Pointless tool.
VVhite-0ut is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MAXSE5SPD
General Maxima Discussion
33
09-17-2022 04:00 AM
kmitchel
8th Generation Maxima (2016-)
12
10-30-2015 10:12 AM
MatthewsMaxima
7th Generation Maxima (2009-2015)
12
09-11-2015 03:21 AM
homeyclaus
Maximas for Sale / Wanted
1
09-03-2015 06:15 PM
Justin Kroll
5th Generation Maxima (2000-2003)
7
09-02-2015 11:06 AM



Quick Reply: Nissan Oil Filter Wrench



All times are GMT -7. The time now is 05:47 PM.