I have a 2011 Maxima SV, me memory seat don’t work Side mirrors don’t work. I’ve been reading post about the different problems and it seems like it’s the BCM, my problem is trying to locate it. Does anyone know where it is?

 

What function of the side mirrors is not working?

 

I have to move them manually.

 

Did you just get the car recently? Did the mirrors or seat ever work?

First make sure the switch that selects the mirror left or right is set properly. If it is in the middle the mirrors won't adjust.

The memory seat is just a setting, If you have not read your owners manual you should do so.

There is nothing wrong with your BCM. Those posters are just guessing. The BCM does not control the mirrors at all.

Regardless he is the BCM information.

If I remember correctly it is behind the gauge cluster. This manual should help you find/fix your problem.

Look under BCS

http://www.nicoclub.com/archives/nis...e-manuals.html
The wiring for the Mirror is in section MIR page 7 of the FSM.

 

 

There are settings that control all those features. The information is contained in your owners manual. You should consider reading that first.
I doubt there is anything wrong with your car.

 

 

In that case double check the fuse it is Fuse #17 (10amp fuse)

 

 

Wondering why I was confused. Section MIR is for cars without Auto Drive Position Control. So that was a simple circuit totally controlled with the mirror switches.

You probably want to look at section ADP that shows how the mirrors and seat are automatically controlled. The ADP control unit controls those functions not the BCM. Maybe a softwear/ setting issue, maybe somebody removed a connector on the ADP unit or the ADP control unit is faulty. Although I think the first two items are more likely. The electronics in these cars is generally pretty reliable.

Mirror wiring is on page ADP 150. I would find the ADP unit, I believe it is also behind the gauge cluster, and check the cables and connections.

 

Wondering why I was confused. Section MIR is for cars without Auto Drive Position Control. So that was a simple circuit totally controlled with the mirror switches. Your car has an ADP unit.

You want to look at section ADP that shows how the mirrors and seat are actually wired and automatically controlled. The ADP control unit controls those functions not the BCM. Maybe a softwear/ setting issue, maybe somebody removed a connector on the ADP unit or the ADP control unit is faulty. Although I think the first two items are more likely. The electronics in these cars is generally pretty reliable.

Mirror wiring is on page ADP 150.

The ADP unit is located behind the audio unit, check the cables and connections. Maybe someone messed with them.

Symptom diagnostics for the issues you are having a noted in ADP pages 164 and 165.

 

 

You do realize there are settings that have to be made with your display unit in order to have the seat and steering wheel automatically adjust to the proper position? Correct? Except there is no setting that would prevent the mirrors from working in manual mode.

Did these features ever work since you had the car? Maybe someone accessed the ADP unit or the door and did not replace the cables properly?

 

Are you able to tilt or telescope your steering wheel manually? This is also controlled by the ADP unit.

 

 

Don't use MIR that is for cars without ADP. Your car has ADP, look at that section of the factory manual. ADP Page 150 is the correct wiring.

http://www.nicoclub.com/service-manu...4%20Maxima/ADP

 

 

The AUTOMATIC DRIVE POSITIONER unit only controls the seats, steering wheel and external mirrors.
And it controls these features in both manual adjust and automatic mode.

 

Maybe you can try disconnecting the battery. Maybe a software glitch. Long shot but I like to try the easy stuff first before tearing the car apart. learned that one the hard way.