BOP's
03-08-2019, 07:09 PM
#1
Newbie - Just Registered
Thread Starter
Join Date: Nov 2018
Posts: 3
BOP's
I know I'm late on this subject and should have taken the opportunity when I had it. But if possible where can I find the 7th gen block off plates and intake spacers? any help is greatly appreciated
03-11-2019, 05:03 AM
#4
Newbie - Just Registered
Join Date: Nov 2014
Posts: 10
Personally, the BOP resulted in loss of power. Specially installing on the passenger's side.
Spacers, couldn't tell, so at the end possibly not worth it, though we'll see if the upRev tune will make it work.
If you want a bit more, try the y-pipe with exhaust. Then get yourself an OBDC connector (Elm327) and buy the very inexpensive app called CVTz50, which was made for Nissan's. Apart from useful for monitoring the CVT transmission, it allows you to adjust timing up to 2 degrees.
Spacers, couldn't tell, so at the end possibly not worth it, though we'll see if the upRev tune will make it work.
If you want a bit more, try the y-pipe with exhaust. Then get yourself an OBDC connector (Elm327) and buy the very inexpensive app called CVTz50, which was made for Nissan's. Apart from useful for monitoring the CVT transmission, it allows you to adjust timing up to 2 degrees.
Thread
Thread Starter
Forum
Replies
Last Post
jowo9
5th Generation Maxima (2000-2003)
21
04-18-2010 12:25 AM