SMT6 Now officially is working
Thread Starter
Joined: Dec 2000
Posts: 35,755
From: Lake Orion, MI
Originally Posted by JClaw
They say if it's fuel based, it will work.
Everytime I asked the 350z forum, only DandyMax responds to me
None of the 350z boys respond to the revlimiter question.
Senior Member
Joined: Oct 2003
Posts: 289
Originally Posted by 98SEBlackMax
IIRC there is a TS ECU out for the 2K1s, but not for the 2Ks.
But the EU would be the better option when its up and running.
But the EU would be the better option when its up and running.
by the way there still is no technosquare ecu available for any 5gen maximas..i called a week ago..and nobody knows **** there..so im guessing the entire project for 2k1's also died down..someone please tell me im wrong...
There IS one available for the 2k1 5 speed, not the auto or any 2k0.
You can install a 2k1 5 speed ECU in a 2k0 with some lite rewiring of the harness.
The 2k2 uses the same harness/ECU connector but it would require almost an entire rewire.
You can install a 2k1 5 speed ECU in a 2k0 with some lite rewiring of the harness.
The 2k2 uses the same harness/ECU connector but it would require almost an entire rewire.
Senior Member
Joined: Oct 2003
Posts: 289
Originally Posted by SR20DEN
There IS one available for the 2k1 5 speed, not the auto or any 2k0.
You can install a 2k1 5 speed ECU in a 2k0 with some lite rewiring of the harness.
The 2k2 uses the same harness/ECU connector but it would require almost an entire rewire.
You can install a 2k1 5 speed ECU in a 2k0 with some lite rewiring of the harness.
The 2k2 uses the same harness/ECU connector but it would require almost an entire rewire.
Thread
Thread Starter
Forum
Replies
Last Post
MAXSE5SPD
General Maxima Discussion
33
Sep 17, 2022 04:00 AM
jerrod99_se-l
4th Generation Classifieds (1995-1999)
2
Aug 27, 2015 08:27 PM