All Motor All Motor Advanced Performance. Talk about Engine Swaps, Internal Engine work. Not your basic Y pipe and Intake Information.

Apexi V-AFC II & S-AFC II

Thread Tools
 
Search this Thread
 
Old 03-07-2006 | 02:37 PM
  #1  
03maxima1's Avatar
Thread Starter
Senior Member
iTrader: (13)
 
Joined: Jul 2005
Posts: 1,512
Apexi V-AFC II & S-AFC II

If the Apexi V-AFC II is supposed to be better then the Apexi S-AFC II then why do most people have the S-AFC and not the other? I am only asking because I am going to purchase one very soon and am a bit confused as to which one I should get.
Thanks
Old 03-07-2006 | 05:01 PM
  #2  
NmexMAX's Avatar
dot dot dot ...
iTrader: (22)
 
Joined: Dec 2000
Posts: 34,588
From: Santa Fe, NM
This question has been asked a thousand times, probably more.

VAFC is better.

The reason people get/got the safc is because either they didn't know at the time they bought safc that the VAFC has more set points, or basically, they still don't know it's better.

I'm the first case. Get the vafc and get double the tuning points.
Old 03-07-2006 | 05:06 PM
  #3  
03maxima1's Avatar
Thread Starter
Senior Member
iTrader: (13)
 
Joined: Jul 2005
Posts: 1,512
Which is the one that you can't put in the sun glass holder? Is it the V-AFC?
Old 03-07-2006 | 05:14 PM
  #4  
NmexMAX's Avatar
dot dot dot ...
iTrader: (22)
 
Joined: Dec 2000
Posts: 34,588
From: Santa Fe, NM
That's correct.
Old 03-07-2006 | 05:16 PM
  #5  
03maxima1's Avatar
Thread Starter
Senior Member
iTrader: (13)
 
Joined: Jul 2005
Posts: 1,512
So then you can't really hide it well.
Old 03-07-2006 | 05:22 PM
  #6  
SR20DEN's Avatar
VQ Wizard
iTrader: (7)
 
Joined: May 2002
Posts: 6,663
From: Charlotte, NC
Unless you extend the wire harness.
Old 03-07-2006 | 05:22 PM
  #7  
NmexMAX's Avatar
dot dot dot ...
iTrader: (22)
 
Joined: Dec 2000
Posts: 34,588
From: Santa Fe, NM
It depends on how creative you are.
Old 03-07-2006 | 05:46 PM
  #8  
Hoooper
Guest
 
Posts: n/a
Originally Posted by 03maxima1
So then you can't really hide it well.
you can hide it. how about the glove-box? or just extend the wires and put it in the sunglass holder.
Old 03-07-2006 | 06:45 PM
  #9  
NmexMAX's Avatar
dot dot dot ...
iTrader: (22)
 
Joined: Dec 2000
Posts: 34,588
From: Santa Fe, NM
These posts are very similar to each other.


Consolidation at its best. Helps those who never read an answer given to them.

Originally Posted by NmexMAX
It depends on how creative you are.
Originally Posted by Hoooper
you can hide it. how about the glove-box?

..

Originally Posted by SR20DEN
Unless you extend the wire harness.
Originally Posted by Hoooper
just extend the wires and put it in the sunglass holder.
Old 03-07-2006 | 07:16 PM
  #10  
Hoooper
Guest
 
Posts: n/a
Originally Posted by NmexMAX
These posts are very similar to each other.
actually, i was trying to support sr20's answers so that the same question didnt get asked again in this thread.
Old 03-07-2006 | 07:48 PM
  #11  
03maxima1's Avatar
Thread Starter
Senior Member
iTrader: (13)
 
Joined: Jul 2005
Posts: 1,512
Originally Posted by Hoooper
you can hide it. how about the glove-box? or just extend the wires and put it in the sunglass holder.
From what I hear V-AFC II will not extend to the sunglass holder.
Old 03-07-2006 | 07:58 PM
  #12  
Puppetmaster's Avatar
Supporting Maxima.org Member
iTrader: (48)
 
Joined: Apr 2004
Posts: 16,555
From: Fairfax, VA
Originally Posted by 03maxima1
From what I hear V-AFC II will not extend to the sunglass holder.
Uh, isn't that why he said to extend the wires? I think we all know that it doesn't reach the sunglass holder.
Old 03-07-2006 | 08:02 PM
  #13  
NmexMAX's Avatar
dot dot dot ...
iTrader: (22)
 
Joined: Dec 2000
Posts: 34,588
From: Santa Fe, NM
Originally Posted by 03maxima1
From what I hear V-AFC II will not extend to the sunglass holder
Do you understand the concept of extending wires?

Add a length of wire that allows the unit to be installed in the sunglass holder.

Meaning wire that does not exsist on the VAFC needs to be added in order for it to be placed in the area of interest.


Originally Posted by Hoooper
actually, i was trying to support sr20's answers
He only had one asnswer, and he made no mention about the glovebox.

And when you agree, this symbol is better than echoing IMO ------>

Old 03-08-2006 | 10:24 AM
  #14  
03maxima1's Avatar
Thread Starter
Senior Member
iTrader: (13)
 
Joined: Jul 2005
Posts: 1,512
Originally Posted by Puppetmaster
Uh, isn't that why he said to extend the wires? I think we all know that it doesn't reach the sunglass holder.
Uh, he could have just been referring to extending the original wires to the sunglass holder.
Old 03-08-2006 | 10:27 AM
  #15  
03maxima1's Avatar
Thread Starter
Senior Member
iTrader: (13)
 
Joined: Jul 2005
Posts: 1,512
Originally Posted by NmexMAX
Do you understand the concept of extending wires?

Add a length of wire that allows the unit to be installed in the sunglass holder.

Meaning wire that does not exsist on the VAFC needs to be added in order for it to be placed in the area of interest.
First, I was referring to the original wiring not extending. 2nd, no need to be a smart A$$.
Old 03-08-2006 | 06:54 PM
  #16  
NmexMAX's Avatar
dot dot dot ...
iTrader: (22)
 
Joined: Dec 2000
Posts: 34,588
From: Santa Fe, NM
Originally Posted by 03maxima1
First, I was referring to the original wiring not extending. 2nd, no need to be a smart A$$.
Why? It had already been establushed and all you did was make it look as if you didn;t read the post where it had been mentioned.


Originally Posted by 03maxima1
2nd, no need to be a smart A$$.
I wasn't trying to be a smart ass just trying to help you understand the concept of extending wires.
Old 03-08-2006 | 07:07 PM
  #17  
Hoooper
Guest
 
Posts: n/a
Originally Posted by 03maxima1
Uh, he could have just been referring to extending the original wires to the sunglass holder.
extend meaning make longer, not take the twisty tab off the wires so they reach further.
Old 03-09-2006 | 09:27 AM
  #18  
03maxima1's Avatar
Thread Starter
Senior Member
iTrader: (13)
 
Joined: Jul 2005
Posts: 1,512
Originally Posted by NmexMAX
Why? It had already been establushed and all you did was make it look as if you didn;t read the post where it had been mentioned.


I wasn't trying to be a smart ass just trying to help you understand the concept of extending wires.
no problem, maybe I misunderstood you.
Old 03-09-2006 | 10:06 AM
  #19  
vsamoylov
Guest
 
Posts: n/a
v-afc 2 map sensor
s-afc 2 maf sensor
Old 03-10-2006 | 01:51 PM
  #20  
doc2278's Avatar
Doctor D I presume???
iTrader: (3)
 
Joined: Oct 2005
Posts: 1,551
From: Mays Landing NJ
why not e-manage? more points of control
Old 03-10-2006 | 05:08 PM
  #21  
Hoooper
Guest
 
Posts: n/a
because it doesnt work on his car. ie: nobody has made it work yet as far as ive heard
Old 03-12-2006 | 08:13 PM
  #22  
NmexMAX's Avatar
dot dot dot ...
iTrader: (22)
 
Joined: Dec 2000
Posts: 34,588
From: Santa Fe, NM
Originally Posted by Hoooper
as far as ive heard
There's one person that I know of that has got it to work with a 3.5L equipped car.
Old 03-12-2006 | 08:18 PM
  #23  
Jason R's Avatar
aka UNCDooD
iTrader: (39)
 
Joined: Jul 2002
Posts: 10,245
From: Aylett, VA



here is my VAFC-II in the glovebox. picked it up not long ago for $150
Old 03-12-2006 | 08:18 PM
  #24  
steven88's Avatar
Need A Light?
iTrader: (28)
 
Joined: Jan 2003
Posts: 8,649
From: SoCal, CA
just get the VAFCII and call it a day...its cheap and effective....I heard emanage ultimate takes about $600 to get it up and running....then u gotta pay tuning etc...AFCII is only about $250 or so...nearly half the price!

IMO, unless you plan on modding the crap out of yer car...like cams, pistons, valves....stick with the AFCII...if u plan to go that route...then yes, emanage ultimate it is!
Old 03-12-2006 | 08:19 PM
  #25  
steven88's Avatar
Need A Light?
iTrader: (28)
 
Joined: Jan 2003
Posts: 8,649
From: SoCal, CA
whoa, thats real clever jason! i like that spot
Old 03-12-2006 | 08:52 PM
  #26  
SR20DEN's Avatar
VQ Wizard
iTrader: (7)
 
Joined: May 2002
Posts: 6,663
From: Charlotte, NC
Originally Posted by Hoooper
because it doesnt work on his car. ie: nobody has made it work yet as far as ive heard

This kind of pessimism is NOT welcome here.
Old 03-12-2006 | 08:59 PM
  #27  
95maxrider's Avatar
Lightly modded
iTrader: (32)
 
Joined: Nov 2001
Posts: 7,735
From: Herndon, VA
Originally Posted by UNCDooD

here is my VAFC-II in the glovebox. picked it up not long ago for $150
That's a good place for it. Care to tell where you got it so cheap from?
Old 03-12-2006 | 09:22 PM
  #28  
Hoooper
Guest
 
Posts: n/a
Originally Posted by SR20DEN
This kind of pessimism is NOT welcome here.
do you have one working?
Old 03-12-2006 | 09:26 PM
  #29  
NmexMAX's Avatar
dot dot dot ...
iTrader: (22)
 
Joined: Dec 2000
Posts: 34,588
From: Santa Fe, NM
Originally Posted by Hoooper
do you have one working?
It's been done.
Old 03-12-2006 | 09:38 PM
  #30  
SR20DEN's Avatar
VQ Wizard
iTrader: (7)
 
Joined: May 2002
Posts: 6,663
From: Charlotte, NC
Originally Posted by Hoooper
do you have one working?
No, but if you buy me one i'll add it to my ever growing , accomplished, list of projects that people said, or thought, couldn't be done.
Old 03-13-2006 | 02:34 AM
  #31  
Jason R's Avatar
aka UNCDooD
iTrader: (39)
 
Joined: Jul 2002
Posts: 10,245
From: Aylett, VA
Originally Posted by 95maxrider
That's a good place for it. Care to tell where you got it so cheap from?

Nope.





67890
Old 03-13-2006 | 07:11 AM
  #32  
vsamoylov
Guest
 
Posts: n/a
Originally Posted by SR20DEN
No, but if you buy me one i'll add it to my ever growing , accomplished, list of projects that people said, or thought, couldn't be done.
we dont need that here either
Old 03-13-2006 | 09:06 AM
  #33  
03maxima1's Avatar
Thread Starter
Senior Member
iTrader: (13)
 
Joined: Jul 2005
Posts: 1,512
Originally Posted by NmexMAX
It's been done.
I know someone that is doing it on a 3.0 too.
Old 03-13-2006 | 09:08 AM
  #34  
03maxima1's Avatar
Thread Starter
Senior Member
iTrader: (13)
 
Joined: Jul 2005
Posts: 1,512
Originally Posted by UNCDooD
Nope.





67890
Why not????
Old 03-13-2006 | 09:29 AM
  #35  
Puppetmaster's Avatar
Supporting Maxima.org Member
iTrader: (48)
 
Joined: Apr 2004
Posts: 16,555
From: Fairfax, VA
Originally Posted by 03maxima1
Why not????
I got mine on eBay used for 175 shipped. I also lost another auction because I was the phone and forgot about it; that final price was 170 shipped for a used unit.

If you look around the Classifieds here as well, people are selling SAFCIIs and VAFCIIs for decent prices these days.
Old 03-13-2006 | 09:36 AM
  #36  
SR20DEN's Avatar
VQ Wizard
iTrader: (7)
 
Joined: May 2002
Posts: 6,663
From: Charlotte, NC
Originally Posted by vsamoylov
we dont need that here either
What? People doing their OWN work?
Old 03-13-2006 | 02:22 PM
  #37  
03maxima1's Avatar
Thread Starter
Senior Member
iTrader: (13)
 
Joined: Jul 2005
Posts: 1,512
Puppetmaster,
I take that back. I guess I never check the whole classified section.
Old 03-13-2006 | 03:06 PM
  #38  
95maxrider's Avatar
Lightly modded
iTrader: (32)
 
Joined: Nov 2001
Posts: 7,735
From: Herndon, VA
Originally Posted by UNCDooD
Nope.

7890
Old 03-13-2006 | 05:51 PM
  #39  
Hoooper
Guest
 
Posts: n/a
Originally Posted by SR20DEN
No, but if you buy me one i'll add it to my ever growing , accomplished, list of projects that people said, or thought, couldn't be done.
just going off the thread i read about hndaeatr. couldnt get his to work and that was being worked on for a long time. i guess if ones working RIGHT, then ok. but i havent heard of it. then again, a lot more pricey and much more effort than a VAFC2
Old 03-13-2006 | 06:11 PM
  #40  
Puppetmaster's Avatar
Supporting Maxima.org Member
iTrader: (48)
 
Joined: Apr 2004
Posts: 16,555
From: Fairfax, VA
Originally Posted by Hoooper
then again, a lot more pricey and much more effort than a VAFC2
You're forgetting that the EU does a lot more than the VAFCII as well....


Quick Reply: Apexi V-AFC II & S-AFC II



All times are GMT -7. The time now is 11:39 AM.