All Motor All Motor Advanced Performance. Talk about Engine Swaps, Internal Engine work. Not your basic Y pipe and Intake Information.
Sponsored by:
Sponsored by: CARiD

compatable MAF's for 3.5

Old Apr 10, 2006 | 07:12 AM
  #1  
mayhemI30's Avatar
Thread Starter
"I'm running with scissors!"
 
Joined: Feb 2003
Posts: 582
compatable MAF's for 3.5

What are the other maf's( if any) that are interchanable between year to year ie; Z32, pathy, etc.
Mine is going out on my '02 and i really dont want to pay for one from the stealership.
Old Apr 10, 2006 | 07:35 AM
  #2  
Puppetmaster's Avatar
Supporting Maxima.org Member
iTrader: (48)
 
Joined: Apr 2004
Posts: 16,551
From: Fairfax, VA
You could get one from a 2001, part # 22680-2Y001, and transfer the IAT from your 2002 MAF. It will work without the IAT too, but will throw a CEL. The 2Y001 is about $90 typically.
Old Apr 10, 2006 | 09:13 AM
  #3  
Fred Allen Burge's Avatar
Senior Member
 
Joined: Jan 2004
Posts: 369
Originally Posted by mayhemI30
What are the other maf's( if any) that are interchanable between year to year ie; Z32, pathy, etc.
Mine is going out on my '02 and i really dont want to pay for one from the stealership.
Here's the interchange for an '04 Maxima MAF:

# Model Year Description
1 350Z 03-05
2 ALTIMA 04-05
3 INFG35 03 frm 8/02, 2 Dr (Cpe)
frm 8/02, 4 Dr (Sed), MT
4 INFG35 04-05
5 INFFX 03-05 3.5L (6 Cyl)
6 MAXIMA 04-05
7 MURANO 03-05 (3.5L, 6 Cyl)
8 PATHFI 03 frm 5/03
9 PATHFI 04
10 QUEST 04-05
11 SENTRA 04-05 2.5L

allen
Old Apr 10, 2006 | 10:10 AM
  #4  
mayhemI30's Avatar
Thread Starter
"I'm running with scissors!"
 
Joined: Feb 2003
Posts: 582
i'm an 02'
Old Apr 10, 2006 | 01:19 PM
  #5  
Hoooper
Guest
 
Posts: n/a
Originally Posted by mayhemI30
i'm an 02'
really? me too

i would think that putting in a 350z MAF might make for longer lasting performance unless its the actual same part #.
Old Apr 10, 2006 | 01:43 PM
  #6  
Nismo3112's Avatar
Custom User Title
iTrader: (12)
 
Joined: Jul 2002
Posts: 4,685
longer lasting performance?
Old Apr 10, 2006 | 02:12 PM
  #7  
mayhemI30's Avatar
Thread Starter
"I'm running with scissors!"
 
Joined: Feb 2003
Posts: 582
Originally Posted by Puppetmaster
You could get one from a 2001, part # 22680-2Y001, and transfer the IAT from your 2002 MAF. It will work without the IAT too, but will throw a CEL. The 2Y001 is about $90 typically.
found one on e-bay for $68.00. hopefully it will work fine.
Old Apr 10, 2006 | 02:53 PM
  #8  
nismology's Avatar
Supporting Maxima.org Member
iTrader: (8)
 
Joined: Apr 2003
Posts: 9,099
From: Miami, FL
Originally Posted by Nismo3112
longer lasting performance?
He has quite a history of incoherent posts.
Old Apr 10, 2006 | 03:03 PM
  #9  
Puppetmaster's Avatar
Supporting Maxima.org Member
iTrader: (48)
 
Joined: Apr 2004
Posts: 16,551
From: Fairfax, VA
Originally Posted by Nismo3112
longer lasting performance?
.
Old Apr 10, 2006 | 03:04 PM
  #10  
Puppetmaster's Avatar
Supporting Maxima.org Member
iTrader: (48)
 
Joined: Apr 2004
Posts: 16,551
From: Fairfax, VA
Originally Posted by mayhemI30
found one on e-bay for $68.00. hopefully it will work fine.
If it doesn't work, I'll buy it from you...

Btw, I didn't realize you had an Alti, but I'm guessing it doesn't make a difference for the 02-03s.
Old Apr 10, 2006 | 03:26 PM
  #11  
vsamoylov
Guest
 
Posts: n/a
the thing about the mafs from 350z/g35 is that the connector has 1 less wire
Old Apr 10, 2006 | 03:44 PM
  #12  
SR20DEN's Avatar
VQ Wizard
iTrader: (7)
 
Joined: May 2002
Posts: 6,661
From: Charlotte, NC
Originally Posted by Hoooper
really? me too

i would think that putting in a 350z MAF might make for longer lasting performance unless its the actual same part #.
Viagra version?
Old Apr 10, 2006 | 04:20 PM
  #13  
scrhale's Avatar
Supporting Maxima.org Member
 
Joined: Dec 2004
Posts: 1,183
From: Atlanta, GA
NO SR20DEN!!! Levitra ... get it right or leave the forum. LOL jk.


That was a pretty good one though ... I had to read your response twice before I got it sadly.
Old Apr 10, 2006 | 04:29 PM
  #14  
SR20DEN's Avatar
VQ Wizard
iTrader: (7)
 
Joined: May 2002
Posts: 6,661
From: Charlotte, NC
Originally Posted by scrhale
NO SR20DEN!!! Levitra ... get it right or leave the forum. LOL jk.


That was a pretty good one though ... I had to read your response twice before I got it sadly.
BUt if it's the Cialis version you'll need to show your mechanic if it stays in perform mode for more than four hours at a time.
Old Apr 11, 2006 | 05:59 AM
  #15  
Fred Allen Burge's Avatar
Senior Member
 
Joined: Jan 2004
Posts: 369
Here's the interchange for an 02 - the later production dates, if your's is an earlier date it may differ.

1 INFG35 03 thru 7/02
frm 8/02, 4 Dr (Sed), AT
2 I35 02 frm 1/02
3 I35 03-04
4 MAXIMA 02 frm 12/01
5 MAXIMA 03
Old Apr 11, 2006 | 06:11 AM
  #16  
NmexMAX's Avatar
dot dot dot ...
iTrader: (22)
 
Joined: Dec 2000
Posts: 34,576
From: Santa Fe, NM
Use the same sensor but w/a larger housing
Old Apr 11, 2006 | 07:19 AM
  #17  
mayhemI30's Avatar
Thread Starter
"I'm running with scissors!"
 
Joined: Feb 2003
Posts: 582
Originally Posted by Puppetmaster
If it doesn't work, I'll buy it from you...

Btw, I didn't realize you had an Alti, but I'm guessing it doesn't make a difference for the 02-03s.
in that case i paid 400 for it

but all that is required is to switch IAT over to the new MAF right??
Old Apr 11, 2006 | 07:37 AM
  #18  
Puppetmaster's Avatar
Supporting Maxima.org Member
iTrader: (48)
 
Joined: Apr 2004
Posts: 16,551
From: Fairfax, VA
Originally Posted by mayhemI30
but all that is required is to switch IAT over to the new MAF right??
That is correct.
Old Apr 11, 2006 | 10:26 AM
  #19  
mayhemI30's Avatar
Thread Starter
"I'm running with scissors!"
 
Joined: Feb 2003
Posts: 582
thanks for all the help guys
Old Apr 20, 2006 | 04:29 AM
  #20  
Epacy's Avatar
Unsuccesful STL Coordinator
iTrader: (6)
 
Joined: Jun 2004
Posts: 2,860
I have found it works for awhile. Then mine started throwing codes.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TallTom
5th Generation Maxima (2000-2003)
57
Oct 14, 2025 05:16 PM
Fbana41
Maximas for Sale / Wanted
3
Aug 29, 2016 12:18 PM
-ReLLiK-
5th Generation Classifieds (2000-2003)
4
Apr 29, 2016 06:25 PM
09maxshawn11
5th Generation Maxima (2000-2003)
5
Sep 30, 2015 10:28 AM
mix master
Audio and Electronics
0
Sep 7, 2015 08:28 PM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 03:36 AM.