Re: Throttle Body For 3.5 Swap
#1
Re: Throttle Body For 3.5 Swap
I was wondering if you can ONLY 01-02 Pathfinder throttle body?? Or can other throttle bodys be used??? Like lets say an 03 altima 3.5 throttle body??
#2
i believe the 03 altima 3.5 is also drive by wire. i believe jclaw had issues with the 3.5 drive by wire when he used the altima engine. If my knowledge doesn't fail me, the 01-02 pathfinder is the only 3.5 engine that isn't drive by wire so it'll work perfectly with the engine swap. dont quote me on that tho.
#5
Originally Posted by Nismo3112
I think it's only the 01 Pathfinder TB..
#6
Originally Posted by laflyer23
Thats interesting. I'm just kinda confused b/cuz in the sticky it says 01-02 so not sure exactly which year. I'll keep looking and get opinions, if all else fails i'll just go with 01.
#11
Originally Posted by laflyer23
Thats interesting. I'm just kinda confused b/cuz in the sticky it says 01-02 so not sure exactly which year. I'll keep looking and get opinions, if all else fails i'll just go with 01.
*Confirmed using the Nissan FAST program
#14
I've been calling places to get a tb and they've been asking me what production date the car was made. So i'm wondering if just as long as it's 01 or 02 it's good. And the production date doesnt matter to me??
#15
Originally Posted by laflyer23
I've been calling places to get a tb and they've been asking me what production date the car was made. So i'm wondering if just as long as it's 01 or 02 it's good. And the production date doesnt matter to me??
#16
07/00 or 08/00 production dates work fine.
is it that there isnt enough space to put the plate for cruise control when converting the drive by wire? From images I've seen, looks like there isnt enough space to fit it on.
is it that there isnt enough space to put the plate for cruise control when converting the drive by wire? From images I've seen, looks like there isnt enough space to fit it on.
#17
Originally Posted by MDeezy
07/00 or 08/00 production dates work fine.
is it that there isnt enough space to put the plate for cruise control when converting the drive by wire? From images I've seen, looks like there isnt enough space to fit it on.
is it that there isnt enough space to put the plate for cruise control when converting the drive by wire? From images I've seen, looks like there isnt enough space to fit it on.
what do you mean?? if you use the pathfinder tb you should be able to fit the cruise control on there with no problem only problem is when you do the conversion from the drive by wire tb to a drive by cable...i dont' think it's possible to use the cruise.
#18
Originally Posted by Biggs_02
what do you mean?? if you use the pathfinder tb you should be able to fit the cruise control on there with no problem only problem is when you do the conversion from the drive by wire tb to a drive by cable...i dont' think it's possible to use the cruise.
I was refering to if you retro the drive by wire, not sure if there is enouh space to fit the cruise control.
the Pathy TB is already set, just bolt up with an adapter plate and you're done.
#25
Originally Posted by Biggs_02
or just buy one from stephen max. and yeah why wouldn't your ac work....
![vqman](https://maxima.org/forums/images/smilies/oracle.gif)
#26
Thread
Thread Starter
Forum
Replies
Last Post
97_GXE
4th Generation Maxima (1995-1999)
5
09-15-2015 06:47 AM
MaxRPM6
New Member Introductions
0
09-11-2015 06:56 PM