00VI brain teaser (unexplained cold start issue)
00VI brain teaser (unexplained cold start issue)
Well this is a good brain teaser for the org. I have been dealing with this since I did my 00VI maybe more than a year ago. But lately I have been thinking about what the hell could be the problem. Here is the problem:
In the mornings i start the car, and idle is rough. a/f is somewhat o.k. but as soon as you try and rev it, it leans out to 16's or even off charts and car just bogs and basically wants to turn off (same symptom as bad MAF). ok now after the needle gets directly over the Cold car, the car idles perfectly normal as if nothing ever happend and revs perfect. So this is a cold start issue. ONLY happens when needle is below C.
I have no iacv, but it shouldn't be causing the problem (no one else has the problem i have), cant be vacuum leak otherwise it would be all the time. What exactly happens during cold start? im thinking maybe an EVAP or EGR problem?
NOTE: i think during cold start ecu runs at open loop, but i cant blame the open loop because my car runs at open loop 24/7 since i have o2's disconnected and im controlling the a/f (below 3k) using vafc2. the starting issue has done it with this setup, and has also done it with o2's being connected (not that it matters cuz o2's are not taken into consideration during cold start)
In the mornings i start the car, and idle is rough. a/f is somewhat o.k. but as soon as you try and rev it, it leans out to 16's or even off charts and car just bogs and basically wants to turn off (same symptom as bad MAF). ok now after the needle gets directly over the Cold car, the car idles perfectly normal as if nothing ever happend and revs perfect. So this is a cold start issue. ONLY happens when needle is below C.
I have no iacv, but it shouldn't be causing the problem (no one else has the problem i have), cant be vacuum leak otherwise it would be all the time. What exactly happens during cold start? im thinking maybe an EVAP or EGR problem?
NOTE: i think during cold start ecu runs at open loop, but i cant blame the open loop because my car runs at open loop 24/7 since i have o2's disconnected and im controlling the a/f (below 3k) using vafc2. the starting issue has done it with this setup, and has also done it with o2's being connected (not that it matters cuz o2's are not taken into consideration during cold start)
Originally Posted by Kevlo911
Thermostat to some extent?
Might be a failing ECTS.
Might be a failing ECTS.
Originally Posted by matty
I would blame the absence of the IACV. The fms isnt really clear to what the IACV and the EGR do during start up. You going lean sounds like a vac though.
-matt
-matt
A vacum problem would be happening all the time.
Originally Posted by nismology
EGR is only active during cruising and light acceleration. Cold start, idle, and WOT are conditions where it's not active.
Thread
Thread Starter
Forum
Replies
Last Post
Finkle
4th Generation Maxima (1995-1999)
13
Sep 27, 2015 09:53 PM
Maximeltman
4th Generation Classifieds (1995-1999)
0
Aug 31, 2015 01:01 PM
kirkhilles
5th Generation Maxima (2000-2003)
2
Aug 8, 2015 10:53 AM




