Does anyone have a write-up on how to install this converter? It would be very helpful.

There is a lot of grey area around hooking up the remote line to power the amp, so if anyone has had experience doing it PLEASE SHARE!!!!!!

 

I hooked my remote wire into the rear speaker.

 

You shouldn't need a write up. Take out the HU. Unplug wiring harness from back of the HU. Plug wiring harness into the AOEM-NIS2. Plug the new set of plugs from the AOEM-NIS2 into the HU. It's literally plug and play, and it just goes between the HU and factory wiring harness.

As for the remote wire...the AOEM-NIS2 has a remote wire lead coming off of it right next to the RCA output leads. Simply run the remote wire from the terminal on your amp to the remote wire lead on the AOEM-NIS2. Couldn't be easier.

 

Plug and Play cant be more easier than that.

 

I figured thats how it went, but a heard some talk that the remote wire wasn't working in some instances. Thanks for yor help!