just a quick question

Reply Subscribe

Thread Tools

Search this Thread

Aug 11, 2006 | 11:24 PM

craigl33

Thread Starter

Member

Joined: Aug 2006

Posts: 43

just a quick question

re: 1996 gle bose system
if i remove the stock head unit will there be connectors behind it where i can connect stripped audio rca cables to?

Aug 12, 2006 | 04:28 AM

kcryan

Senior Member

iTrader: (1)

Joined: Sep 2004

Posts: 2,059

if you do some cutting, or if you get an A/M harness

Aug 12, 2006 | 05:39 AM

craigl33

Thread Starter

Member

Joined: Aug 2006

Posts: 43

please explain? and what's an A/M harness?

Aug 12, 2006 | 05:55 AM

kcryan

Senior Member

iTrader: (1)

Joined: Sep 2004

Posts: 2,059

aftermarket wiring harness, look em up on like crutchfield.com

Aug 12, 2006 | 07:57 AM

craigl33

Thread Starter

Member

Joined: Aug 2006

Posts: 43

this seems to be it. so i can connect rca wires to the bare wires?
http://www.crutchfield.com/S-jy24GHj...ss&i=120707550

what's the "sub" and "main" prongs in this
http://www.carstereohelp.net/wireharness_Nissan2.htm

Aug 12, 2006 | 09:14 AM

Hexon

Senior Member

iTrader: (1)

Joined: Jun 2006

Posts: 877

From: Knoxville, TN

No, no, no! You have to buy a line out converter http://www.crutchfield.com/S-IgugZ69...=721&I=142SLC4. Then you tap into the + and - wire going to one of your rear speakers if you are adding a sub.

Aug 12, 2006 | 03:34 PM

kcryan

Senior Member

iTrader: (1)

Joined: Sep 2004

Posts: 2,059

you dont have to, but yes, that is the best way too...

Aug 12, 2006 | 05:16 PM

craigl33

Thread Starter

Member

Joined: Aug 2006

Posts: 43

a line out converter basically splits audio signals into 4 channels right? can't i achieve the same effect by just stripping wires and making Y splits?

Aug 12, 2006 | 05:36 PM

craigl33

Thread Starter

Member

Joined: Aug 2006

Posts: 43

ok so i want to completely remove the bose headunit. not use it at all because i want to put a lcd there. i would like to get audio from a carputer and use the car's speakers.
Pac Aoem-nis2?