THE Audio thread ! 06/07/08/09/10/11/12/13ers move along..
#1641
#1644
Its nice to be able to reach stuff without having small girly hands. You can almost fit a small child in my Chevy Silverado dash... not that I would want to
#1645
oh, Don they want t3h rainbowz bad.
#1651
#1653
pretty much them two.
Sam's a pretty nice guy and all, but like i mentioned in our convo, i don't want to see houston saturated with high end stuff to unappreciative consumers.
Sam's a pretty nice guy and all, but like i mentioned in our convo, i don't want to see houston saturated with high end stuff to unappreciative consumers.
#1672
Don. Thanks for the tip on finishing the crown moulding. I used it on some chair rails as I needed to finish the room and it worked like a champ.
One thing I am having trouble with is the caulking gun. I have used 3 tubes of caulking and one blew out the back just after loading, one was fine, and this one had a similar issue but didn't blow out till I had used 3/4 of the tube. It always happens where the plunger depresses the "loading plate" in the tube. I am getting kinda pissed though and think it is most likely something I am doing wrong. Any suggestions?
One thing I am having trouble with is the caulking gun. I have used 3 tubes of caulking and one blew out the back just after loading, one was fine, and this one had a similar issue but didn't blow out till I had used 3/4 of the tube. It always happens where the plunger depresses the "loading plate" in the tube. I am getting kinda pissed though and think it is most likely something I am doing wrong. Any suggestions?
#1674
I tend to get a bit irritable
iTrader: (151)
Join Date: Feb 2002
Location: Central Jersey
Posts: 17,671
Don. Thanks for the tip on finishing the crown moulding. I used it on some chair rails as I needed to finish the room and it worked like a champ.
One thing I am having trouble with is the caulking gun. I have used 3 tubes of caulking and one blew out the back just after loading, one was fine, and this one had a similar issue but didn't blow out till I had used 3/4 of the tube. It always happens where the plunger depresses the "loading plate" in the tube. I am getting kinda pissed though and think it is most likely something I am doing wrong. Any suggestions?
One thing I am having trouble with is the caulking gun. I have used 3 tubes of caulking and one blew out the back just after loading, one was fine, and this one had a similar issue but didn't blow out till I had used 3/4 of the tube. It always happens where the plunger depresses the "loading plate" in the tube. I am getting kinda pissed though and think it is most likely something I am doing wrong. Any suggestions?
As for the gun ... you want a very small hole at the opening. Nothing large like doing a box or something. Regarding the blowout ... you did puncture after cutting the tip right?
#1677
edit: damn i'm going to need 4 sets. i forgot about two sets from HU to EQ, and two sets from EQ to amps.
this is gonna get pricey.