Suggestions from the experts.....
#1
Suggestions from the experts.....
I have the stock non-BOSE system in my 01 SE and have an Eclipse 5504 CD Tuner from my other car to install into it. I also have a Fosgate Punch 100 (2 years old) but not much else yet. I'm planning to install Boston Acoustic Pro series 6.5" separates up front and Boston coaxials in the rear doors along with 1 10" or 12" sub. Will the stock front speaker locations give me solid imaging and sound quality? I'm looking to power the sub with the Fosgate amp and buy and Orion 4 channel amp for the mid and high range drivers. I'm also looking to add the Eclipse Commander system with cellphone interface initially and later the GPS hookup. Anyone have any suggestions or experience with these items? Specifically speaker brand choice and an Orion or Kicker sub versus a JL Audio stealthbox? Thanks in advance!
#2
The top-of-the-line stuff from Orion and Kicker is definitely good, but I'm partial to JL Audio. That HU doesn't have an amp section in it, does it? You can definitley get a good left/right balance if you take the time to aim the tweeters properly.
#3
Originally posted by Micah95GLE
The top-of-the-line stuff from Orion and Kicker is definitely good, but I'm partial to JL Audio. That HU doesn't have an amp section in it, does it? You can definitley get a good left/right balance if you take the time to aim the tweeters properly.
The top-of-the-line stuff from Orion and Kicker is definitely good, but I'm partial to JL Audio. That HU doesn't have an amp section in it, does it? You can definitley get a good left/right balance if you take the time to aim the tweeters properly.
#4
Your system will be pretty comparable to mine, check out my CarDomain site for some pics of my system. I have JL speakers all around components, coaxials and subs. The imaging is pretty decent, it isn't the greatest, but it will do for installing the drivers in the stock location. I have one of the newer line of Eclipse units, the CD8051 to be exact. The unit kicks some serious booty and I'm thinking about the commander unit as well. It would be pretty sweet!! I have Kicker amps and just let me say that they rock!! The only real problem that I see is that the input voltage that the Kicker's can take is only 2V, while my unit is kicking out 8V so that is the only thing they are seriously lacking in. I'm thinking of some EQT's for EQ's so those will match the voltage between the HU and the amps. Good luck with the system!!
#5
Originally posted by Dustyroads
Your system will be pretty comparable to mine, check out my CarDomain site for some pics of my system. I have JL speakers all around components, coaxials and subs. The imaging is pretty decent, it isn't the greatest, but it will do for installing the drivers in the stock location. I have one of the newer line of Eclipse units, the CD8051 to be exact. The unit kicks some serious booty and I'm thinking about the commander unit as well. It would be pretty sweet!! I have Kicker amps and just let me say that they rock!! The only real problem that I see is that the input voltage that the Kicker's can take is only 2V, while my unit is kicking out 8V so that is the only thing they are seriously lacking in. I'm thinking of some EQT's for EQ's so those will match the voltage between the HU and the amps. Good luck with the system!!
Your system will be pretty comparable to mine, check out my CarDomain site for some pics of my system. I have JL speakers all around components, coaxials and subs. The imaging is pretty decent, it isn't the greatest, but it will do for installing the drivers in the stock location. I have one of the newer line of Eclipse units, the CD8051 to be exact. The unit kicks some serious booty and I'm thinking about the commander unit as well. It would be pretty sweet!! I have Kicker amps and just let me say that they rock!! The only real problem that I see is that the input voltage that the Kicker's can take is only 2V, while my unit is kicking out 8V so that is the only thing they are seriously lacking in. I'm thinking of some EQT's for EQ's so those will match the voltage between the HU and the amps. Good luck with the system!!
Thread
Thread Starter
Forum
Replies
Last Post
DC_Juggernaut
7th Generation Maxima (2009-2015)
4
09-28-2015 04:07 PM
Pied
4th Generation Maxima (1995-1999)
0
09-26-2015 03:29 PM