alpine w205
#4
Ok, I have the 97 Mazima with the Bose system and just got the Alpine W205 and I got the Amp integration Harness Metra Part 70-7551 harness and it turns on but I'm not getting any volume. Do I have to do something?
I read this:
"Some headunits require you to have your internal amp switched off in order to utilize the preamp outs, including the subwoofer rca's. In my case, i got no signal from the hu to my subs the original way because my internal amplifier was enabled."
Does that apply to me? Is there a switch that I use to turn it on or off?
The three items I bought were:
Metra 70-7551 Harness
Metra AD NI1 40-NI10 Antenna Adapter
Metra 95-7417 Dash Kit
I read this:
"Some headunits require you to have your internal amp switched off in order to utilize the preamp outs, including the subwoofer rca's. In my case, i got no signal from the hu to my subs the original way because my internal amplifier was enabled."
Does that apply to me? Is there a switch that I use to turn it on or off?
The three items I bought were:
Metra 70-7551 Harness
Metra AD NI1 40-NI10 Antenna Adapter
Metra 95-7417 Dash Kit
Last edited by Liu Kang; 02-02-2012 at 03:39 PM.
#5
Ok, I have the 97 Mazima with the Bose system and just got the Alpine W205 and I got the Amp integration Harness Metra Part 70-7551 harness and it turns on but I'm not getting any volume. Do I have to do something?
I read this:
"Some headunits require you to have your internal amp switched off in order to utilize the preamp outs, including the subwoofer rca's. In my case, i got no signal from the hu to my subs the original way because my internal amplifier was enabled."
Does that apply to me? Is there a switch that I use to turn it on or off?
The three items I bought were:
Metra 70-7551 Harness
Metra AD NI1 40-NI10 Antenna Adapter
Metra 95-7417 Dash Kit
I read this:
"Some headunits require you to have your internal amp switched off in order to utilize the preamp outs, including the subwoofer rca's. In my case, i got no signal from the hu to my subs the original way because my internal amplifier was enabled."
Does that apply to me? Is there a switch that I use to turn it on or off?
The three items I bought were:
Metra 70-7551 Harness
Metra AD NI1 40-NI10 Antenna Adapter
Metra 95-7417 Dash Kit
#6
you need to connect the blue/white to the car's amp turn on wire to ensure the BOSE amps turn on, as right now they are not.
Do NOT connect the blue and blue/white wires all together...you're asking for trouble if you do this
Do NOT connect the blue and blue/white wires all together...you're asking for trouble if you do this
#7
ok, I got the volume up and running. Thanks for that. Now I got the PAC TR-7 but I don't think I have that hooked up properly cause no video is working. I got this from the internet is it right:
http://www.pac-audio.com/PACProductD...ief_052510.pdf
red on the tr-7 to red on the headunit harness
black on the tr-7 to black on the headunit harness
green on the tr-7 to blue/white on the headunit harness
blue on the tr-7 to yellow/black on headunit harness
white on the tr-7 to yellow/blue on the headunit harness
http://www.pac-audio.com/PACProductD...ief_052510.pdf
red on the tr-7 to red on the headunit harness
black on the tr-7 to black on the headunit harness
green on the tr-7 to blue/white on the headunit harness
blue on the tr-7 to yellow/black on headunit harness
white on the tr-7 to yellow/blue on the headunit harness
#11
that should do it, the way you have it - Ive put in plenty with no issues. there is no programming involved... did you get the TR7 used? if so it may need to be reset as it might be programmed for something else
should be
black to black
red to red
green to blue/white
blue to yellow/black
white to yellow/blue
you don't have anything else hooked up to the park/hand brake wires right?
should be
black to black
red to red
green to blue/white
blue to yellow/black
white to yellow/blue
you don't have anything else hooked up to the park/hand brake wires right?
Last edited by mendon99; 02-08-2012 at 09:49 AM.
#12
that should do it, the way you have it - Ive put in plenty with no issues. there is no programming involved... did you get the TR7 used? if so it may need to be reset as it might be programmed for something else
should be
black to black
red to red
green to blue/white
blue to yellow/black
white to yellow/blue
you don't have anything else hooked up to the park/hand brake wires right?
should be
black to black
red to red
green to blue/white
blue to yellow/black
white to yellow/blue
you don't have anything else hooked up to the park/hand brake wires right?
Dan
Thread
Thread Starter
Forum
Replies
Last Post
Kyle Lee Cleveland
6th Generation Maxima (2004-2008)
3
09-28-2015 07:58 AM