No power to H/U
#1
No power to H/U
hi guys, today i installed a Pioneer DEH-1900MP, and it won't power on. I installed the ground to the stock harness ground (12V-) instead of to bare metal on the car.
Shouldn't it still power on? I checked all the wiring, & it matches up. What else could it be besides the ground?
thx
Shouldn't it still power on? I checked all the wiring, & it matches up. What else could it be besides the ground?
thx
#6
Hey, you guys were right! It was the 15A "Audio" fuse under the hood. I thought it would have been a fuse under the steering wheel. I guess the fuse popped when the thieves got my last H/U. Thx again for the advice. Oh yeah, the ground in the factory harness works fine.
Last edited by kauaiwyatt; 04-18-2008 at 03:43 PM.
#7
I tend to get a bit irritable
iTrader: (151)
Join Date: Feb 2002
Location: Central Jersey
Posts: 17,671
The ground in the factory harness is not actually working fine. Your grounding through either the chassis or the antenna (floating). I would suggest re grounding directly to the chassis rather than the harness.
Thread
Thread Starter
Forum
Replies
Last Post