Hey, I just got an infiniti I30 (98) and the Bose H/U is a POS My aftermarket H/U is a POS too, but I don't want to spend any money to get another one.

After I wired it up I have no sound. I used the Pac roem Nis2 and an antenna adapter from walmart(can't remember the brand). The unit comes on, I can hear the antenna motor running. I have 6 wires from the Pac roem nis2 that did not get used.
Blue/White-Amp trigger
orange-illumination/dimmer
4 speaker wires from the low(+) side. I saw on other forums that these wires didn't need to be used.
The only other wire I have not used is one of the black wires from the factory wiring. It is a fat round plug that has 5 or 6 pins. I have not been able to figure out what this is or if I need to do anything with it.

Any help will be greatly appreciated.

 

hi how are you doing i do installs for a living you can use a metra plug #70-7551 to do this car but your radio has to have the proper rca outputs or the metra plug#70-7550 will work if you dont have the proper rca output

 

Hey, I already have the Pac roem nis2. I would prefer not to spend any more $$ on another harness when the Pac should work. I just did something wrong along the way and don't know what yet. Thanks for the reply

 

Wish i was familiar with you cars harness. With the information provided, i am assuming that the bose amp is not getting a remote signal from the head unit. That is what the blue/white wire is for.

 

That blue/white wire was the issue. I was thinking it was but then saw your post. The unit works and sounds great!!!! Thanks for your reply

 

So what do you do with the speaker wires and amp wires