Detailing Discuss how to make your car sparkly clean for car shows, local meets, or any other reason. What products do others use and how do we get them? Get your questions answered in here.

Removed dealer badge now ugly residue

Thread Tools
 
Search this Thread
 
Old Nov 19, 2008 | 06:44 PM
  #1  
Blitzfist's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: Aug 2008
Posts: 448
From: Rockland, NY
Removed dealer badge now ugly residue

removed by dealer badge from my car because I was sick of looking at it and the little bastard thing left a nice brow adhesive oval in the back of my car

anyone have an idea how to get rid of that crap it looks disgusting.
Old Nov 19, 2008 | 06:47 PM
  #2  
Squirrel82's Avatar
.
iTrader: (30)
 
Joined: Aug 2006
Posts: 1,116
From: Laurel MD
Search the detailing section.

They sell adhesive removers at auto parts places.
Old Nov 19, 2008 | 06:56 PM
  #3  
maxgen5's Avatar
Member
 
Joined: Dec 2007
Posts: 47
From: Dallas, TX
Goo Gone... (rubbing alcohol works too, but takes more time) it's what I used and worked great. After that I used some light rubbing compund and then polished with a buffer... history
Old Nov 19, 2008 | 06:59 PM
  #4  
Blitzfist's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: Aug 2008
Posts: 448
From: Rockland, NY
good info guys. The goo gone is only 2 bucks so this wasnt a big deal at all.
Old Nov 19, 2008 | 07:34 PM
  #5  
Bjs470's Avatar
Senior Member
iTrader: (13)
 
Joined: May 2008
Posts: 1,733
From: Chicago, IL
yea goo gone and allota elbow grease
Old Nov 19, 2008 | 07:45 PM
  #6  
fishforlife2007's Avatar
Member
 
Joined: Oct 2008
Posts: 85
From: louisville, KY
i personaly would reccomend Bug and Tar Remover. its made by turtle wax. stuff works wonders
Old Nov 19, 2008 | 07:46 PM
  #7  
Drockb418's Avatar
Senior Member
iTrader: (10)
 
Joined: May 2007
Posts: 1,393
From: Edmond Oklahoma
and some heat not like burning hot but more than warm will make it come off fast
Old Nov 19, 2008 | 08:07 PM
  #8  
jeff5347's Avatar
Senior Member
 
Joined: Dec 2005
Posts: 1,124
From: Leicester, Ma
its the left over glue or tape. Take a blow dryer adnset it on hot and fast blow.. what ever its called. Get some rubbing alchohol too. Heat the adhesive and rub with the rubbing alchohol. Like BJS said it will take time but it will come off . After your done ust wax that area and you done.
Old Nov 19, 2008 | 08:16 PM
  #9  
maximase86's Avatar
I love lamp.
iTrader: (24)
 
Joined: Nov 2002
Posts: 6,696
From: Seattle, WA
I've used 3m adhesive/wax remover. Be sure that after you use any of that stuff, rewax the area to seal things back up.

S
Old Nov 19, 2008 | 10:03 PM
  #10  
MaximaPimpin's Avatar
Senior Member
iTrader: (3)
 
Joined: Jul 2007
Posts: 291
From: Jax, FL
A lil heat and goo gone= clean surface. Or you can just wait it out and it will slowly get out after a while lol.
Old Nov 20, 2008 | 08:08 AM
  #11  
Tee00Max's Avatar
Senior Member
iTrader: (18)
 
Joined: Dec 2006
Posts: 646
From: Atlanta, GA
I say put a little heat and some goo gone..its gonna take a little time and some real hard rubbing and after its all gone or most of it, get some wax and wax the area and it should be good, one of the most aggrivating jobs of the max is debadging and getting the goo off!!
Old Nov 20, 2008 | 08:28 AM
  #12  
goathead's Avatar
Member
 
Joined: Nov 2008
Posts: 84
From: CT
Originally Posted by maximase86
I've used 3m adhesive/wax remover. Be sure that after you use any of that stuff, rewax the area to seal things back up.

S
+1 on the 3m, that stuff works great for decals or tape. I've removed both.
Old Dec 3, 2008 | 08:05 AM
  #13  
4DS
Guest
 
Posts: n/a
Originally Posted by fishforlife2007
i personaly would reccomend Bug and Tar Remover. its made by turtle wax. stuff works wonders
+1 for Bug and Tar Remover, seemed to work much better then goo gone.
Old Dec 4, 2008 | 05:20 PM
  #14  
RPMiracle's Avatar
Junior Member
 
Joined: Jan 2007
Posts: 63
From: West Mobile, AL.
Originally Posted by fishforlife2007
i personaly would reccomend Bug and Tar Remover. its made by turtle wax. stuff works wonders
You're exactly right, this is a great product to keep in the arsenal.
Old Dec 4, 2008 | 05:28 PM
  #15  
ChrisMan287's Avatar
Got Retrofit?
iTrader: (34)
 
Joined: Jul 2008
Posts: 14,761
From: NY
For that sticky adhesive just keep on heating it up and pealing it off little by little with either your thumbnail or a cloth.
Old Dec 18, 2008 | 01:58 PM
  #16  
Maximillionaire's Avatar
Junior Member
 
Joined: Dec 2008
Posts: 26
From: Montreal, QC
Originally Posted by maxgen5
Goo Gone... (rubbing alcohol works too, but takes more time) it's what I used and worked great. After that I used some light rubbing compund and then polished with a buffer... history
Maybe a bit late into the thread but I would never use rubbing alcohol to remove anything from a car. That stuff will eat right through your clearcoat. Get some bug and tar remover or a similar product; I would never risk an improvised, home-made fixer on my paint especially when there's any sort of hard rubbing involved.

Get some bug and tar remover, smear it over and rub it lightly. Not too hard, or you may hurt the clearcoat. If the car is a couple of years old there will be some color-fade (the paint under the sticker will be like new, basically). Apply some Meguiars' ScratchX or a similar product following the directions on the bottle and then give the car a fresh coat of wax. Shouldn't notice the difference, unless the car is really old.

Last edited by Maximillionaire; Dec 18, 2008 at 02:00 PM.
Old Dec 19, 2008 | 06:42 AM
  #17  
Snypa's Avatar
Senior Member
iTrader: (35)
 
Joined: May 2007
Posts: 7,389
From: I-75 4th_Laud
for goo-gone and tar remover.
Old Dec 26, 2008 | 02:34 PM
  #18  
2005maximasl's Avatar
Newbie - Just Registered
 
Joined: Dec 2008
Posts: 2
whats wrong with using gas? It will take it right off!
Old Dec 28, 2008 | 08:05 PM
  #19  
FunLovinMaxima's Avatar
Senior Member
 
Joined: Apr 2005
Posts: 4,955
From: a charming town in Connecticut first settled in the 1600s
i've used wd-40 because i had it laying around and it worked just fine. just make sure to rinse it off when you're done.
Old Jan 18, 2009 | 09:42 PM
  #20  
rollin-on-dubs's Avatar
Junior Member
 
Joined: Jan 2009
Posts: 30
Hair Dryer or heat gun a few inches away.
Old Jul 30, 2009 | 02:56 PM
  #21  
maxgen5's Avatar
Member
 
Joined: Dec 2007
Posts: 47
From: Dallas, TX
Originally Posted by Maximillionaire
Maybe a bit late into the thread but I would never use rubbing alcohol to remove anything from a car. That stuff will eat right through your clearcoat. Get some bug and tar remover or a similar product; I would never risk an improvised, home-made fixer on my paint especially when there's any sort of hard rubbing involved.

Get some bug and tar remover, smear it over and rub it lightly. Not too hard, or you may hurt the clearcoat. If the car is a couple of years old there will be some color-fade (the paint under the sticker will be like new, basically). Apply some Meguiars' ScratchX or a similar product following the directions on the bottle and then give the car a fresh coat of wax. Shouldn't notice the difference, unless the car is really old.
Very true, alcohol can be a bad thing if used carelessly. This should have been noted as well as the weak rubbing alcohol variety.
Old Aug 3, 2009 | 07:07 PM
  #22  
1handicap's Avatar
Newbie - Just Registered
 
Joined: Aug 2009
Posts: 11
From: Macungie,Pa
The old detailer's trick is a hair dryer to remove the emblem and at the same time,it is softens the adhesive.
Old Aug 7, 2009 | 08:28 PM
  #23  
dandjjohnson's Avatar
Junior Member
 
Joined: Jul 2003
Posts: 16
I second the "use gas" comment, but don't rub too hard. Gas will break down most adhesives quickly...
Old Aug 8, 2009 | 12:13 AM
  #24  
Maximus3.0's Avatar
Junior Member
iTrader: (1)
 
Joined: Jun 2005
Posts: 37
From: Tucson
The gas trick works great little at a time on a rag and the stuff is gone. Just make sure you throw a coat of wax on after, save's the clear coat!
Old Aug 8, 2009 | 01:47 AM
  #25  
B_Eaze's Avatar
Senior Member
iTrader: (3)
 
Joined: Apr 2006
Posts: 800
From: Cambridge, Mass
Goo Gone ... wont give you cancer
Old Aug 9, 2009 | 10:59 PM
  #26  
davidg4781's Avatar
Newbie - Just Registered
 
Joined: Aug 2009
Posts: 15
From: Alice, TX
Has anyone asked the dealer to remove it before leaving the lot? I think I'm going to do that when I buy a car. They stuck it on, they can take it off. Maybe that will teach them not to put their advertisements on our cars.
Old Aug 20, 2009 | 06:34 AM
  #27  
marjen's Avatar
Member
iTrader: (1)
 
Joined: May 2009
Posts: 139
From: Oxford, CT
Just removed mine yesterday, a little dental floss to start it and then some Bug and tar remover. Easy as pie. Took about 5 mins.
Old Sep 8, 2009 | 10:34 PM
  #28  
Rush's Avatar
Junior Member
 
Joined: Sep 2009
Posts: 28
From: Central PA
Some fishing line, a hair dryer, and Goo Gone. But as everyone else has said, make sure you treat the paint appropriately afterward.

I used a rubbing compound from Meguiar's. Love Meguiar's.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
James92SE
3rd Generation Maxima (1989-1994)
142
Jan 2, 2024 09:23 AM
RinconI30
Infiniti I30/I35
72
Jun 11, 2016 08:25 PM
jc53
8th Generation Maxima (2016-)
18
Oct 6, 2015 06:00 AM
Max8
8th Generation Maxima (2016-)
16
Sep 22, 2015 02:53 PM




All times are GMT -7. The time now is 02:58 PM.